An expert who has achieved level 2 by getting 100 points
An expert who has answered 20 questions.
An expert that has over 10 points.
An expert whose answer got voted for 2 times.
Re: radio wont run on
Check your fuses in the under hood fuse box, more than likely the Radio fuse is located under the hood or in the trunk fuse box. Check and replace as necessary, if it's not something simple then take it to the dealership.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The buttons in your steering wheel are designed to work with the factory radios only. If you replaced the radio with anything other than a factory radio your chances of getting the steering wheel buttons are pretty slim.
Are these on the radio itself or on the steering wheel? If the radio, you may need to pull the radio fuse (Warning! This will delete any and all saved Bluetooth devices, radio station presets, clock, eq settings, bal and fade settings, etc) and then try it again. If the issue is with the steering wheel controls, and you have an aftermarket radio most often you will need an adapter to connect the new radio to the steering wheel as well as a radio that has that capability.
my 2007 mountain navigation system wont read the cd, but along with that my touch screen will only stay unable to read cd, I cant change any of my radio stations nor switch my medi system none of the buttons on steering wheel or radio work, my radio is on ,but one station,, does the cd needed for navation system run the media and radio
With A/C your problem is condensation, you may have an A/C tube that has damage or a small cut throughout the connection, or it could be the clamp. Go under the dash and see where it leaks from and just remove the plastic tubing or hose. You can get that part at Autozone, lappens or Pep Boys.
You can replace the radio with an aftermarket but the steering wheel controls wont work unless you hook up the steering wheel control adapter , where ever you buy the radio ask for that interface or any car stereo shop will sell it to you and you will be all set.
=================================== Philips Renault Code Entry
Turn on the radio and the display will show 'CODE'
Use the steering controls for code entry.
Press the [ ¬] button then rotate the thumb wheel for the correct first digit Press the [ ¬] button then rotate the thumb wheel for the correct second digit Press the [¬ ] button then rotate the thumb wheel for the correct third digit Press the [¬ ] button then rotate the thumb wheel for the correct fourth digit
If the correct code is now shown on screen, press and hold the [ ¬] button for up to 10 seconds to store the code ===================================
it is not the fuses, if the fuses where blown the radio would not work, this is caused by the rotaqting ribbon contact under the steering wheel having an open circuit, this contact is what allows the wheel to turn but still have a connection to the steering column wiring and the radio..
it sounds like you got 2 problems...the cruise and radio buttons sound like a bad clockspring......the overhead console problem sounds like a bad ambient temp sensor located behind the grill. if it is too cold out the ac will not run