Question about 2003 Mitsubishi Outlander

1 Answer

Head torque settings

Hi im looking for the head torque setting for a pajero 3.5 l, v6 dohc its a 1994 model

Posted by on

  • Anonymous Mar 19, 2014

    Torque settings for flywheel

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mitsubishi Master
  • 70,387 Answers

The torque is 90 foot lbs, and they want you to use new bolts, the old ones are stretched and CAN NOT be reused, tighten 20 lbs at a time in proper sequence as outlined in service manual.

Posted on Dec 03, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 94 Hyundai Excel. I am replacing the clutch but can't find the torque settings anywhere.


clutch/flywheel torque settings - Hyundai Forums : Hyundai Forum

www.hyundai-forums.com/...accent/146383-clutch-flywheel-torque-setti...

Aug 2, 2012 - 3 posts - ‎2 authors
Im after the torque setting for the clutch and fly wheel for a lc 2000 accent with the dohc 16v engine. cheers.Missing: .94

Torque value head bolts 1994 hyundai excel 1.5l - Fixya

www.fixya.com/cars/t12339610-torque_value_head_bolts_1994_hyundai
Apr 7, 2012 - SOURCE: torque settings for a hyundai accent 1500 1998. cylinder ...SOURCE: how d i change a clutch in a hyundai excel 1994. Hi first lift the ...

Flywheel & Pressure Plate Torque Specifications? - Hyundai ...

www.hyundaiaftermarket.org > ... > Engine, Intake, Exhaust

Dec 19, 2015 | Hyundai Cars & Trucks

1 Answer

What lead goes to what spark plug on nj pajero dohc as only 3 leads


your engine should be 6G76 V6

number one cylinder is closest to the timing belt

With the plug out and finger over the plug hole while turning the motor clockwise ...number one cylinder will be the only cylinder coming to compression at Top dead Centre

on the dissy The firing order is 1-2-3-4-5-6,

with rotor to number one when it is at Top Dead Center

the heads wont be 123 on one bank and 456 on the other
more like 1 3 5 on one bank and 246 on the other

hope this helps




Oct 19, 2014 | 1997 Mitsubishi Pajero

1 Answer

Isuzu 1999 v6 engine 3.2 DOHC cylinder head


wow , no car body stated, so all online FSM , cant look it up.
as they ask year, body first. or you get nothing..

did your read the FSM first?
seems not.
are they TTY bolts, ? the book says, so. and would be question one

some are not set with torque, but are set by turns angles.
if not TTY bolts (torque to yield)
do you think 15 year old bolts are still good. Id bet not.
those are the first 2 questions, on all cars this old.

at random i picked trooper. and it had a 3.2 option and the
head torque is
Step 1: 21 ft. lbs.
Step 2: 47 ft. lbs.

on the head page the first line reads

"Use new head bolts when installing the cylinder head."

doesnt say way, only that.... you can google the why
or join a real isuzu form and ask, THEY KNOW.

and use the L marked gasket on left bank.

Aug 27, 2014 | Isuzu Cars & Trucks

2 Answers

Cylinderhead torque settings


I'm not sure what engine you have in your 95 grand am SO I will give you both the 4cyl and 6cyl Specs. Also you didn't ask for the torque sequence. I will include that as well for both. 2.3 DOHC Quad 4cyl: Torque sequence---> front ' 7 3 1 5 9 ' of engine ' 8 6 2 4 10 ' Step 1: torque bolts 1 thru 6 (26 Ft/Lbs & 90 degree turn) Step 2: torque bolts 7 & 8 (15 Ft/Lbs & 90 degree turn) Step 3: torque bolts 9 & 10 (22 Ft/Lbs & 90 degree turn) Recheck final torque in sequence *** CAUTION *** This engine uses "Torque To Yield" (TTY) head bolts that means they permanently stretch during the initial installation. New head bolts must be used when cylinder head is replaced or re-installed in order to obtain proper torque. 3.1 liter V6 Torque sequence--> ' 6 2 3 7 ' ' 5 1 4 8 ' Step 1: torque bolts in sequence to 33 Ft/Lbs Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION *** This particular engine uses "Torque To Yield" head bolts(TTY) (that means the bolts permanently stretch during the initial installation.) You MUST use NEW head bolts when replacing or reinstalling the cylinder head in order to obtain the proper torque.

Aug 22, 2014 | 1995 Pontiac Grand Am

1 Answer

1986 Mustang 3.8L cyl. head torque.


The aluminum heads on a cast iron block require some gentle torque procedures.... It may not be necessary - but I suggest that you start near the center of the head and work out with each tightening step. This will ensure that you don't put too much pressure on a single portion of the head. The standard proceedure for the 3.8 V6 up until 1994 is as follows:
You will have some long and some shorter head bolts. Place a small mark on the long bolts to identify them during the final torque proceedure.

Step 1: 15 (on all bolts)
Step 2: 29 (on all bolts)
Step 3: 37 (on all bolts)
Step 4: Now, starting near the center of the head, loosen a single head bolt about 2 turns. Now, torque it down to about 15 (+/- 3 lbs) IF A LONG BOLT.
OR 11 (+/- 3 lbs) IF A SHORT BOLT.
Step 5:
After all bolts are set as described above, ....go over them 1 more time, starting near the center of the head and pull each bolt down another 1/4 turn (90 degrees).
You are done!!

Oct 10, 2009 | 1986 Ford Mustang

2 Answers

Hi I need torque specs for b5 dohc(cylinder head job)


the pdf manual says it is 10 - 13 ft lbs  from my research it is 75 ft lbs
I hope I am right cus I just set my head at that :( before i got the pdf file!
havent started it yet though

Feb 23, 2009 | 1994 Mazda Protege

1 Answer

Need to know cylinder head bolt torque specs


Head Bolt Torque For your 1994 Oldsmobile Cutlass Supreme (3.4L SFI DOHC): clearpixel.gif Foot pounds (Final torque) clearpixel.gif Note: Torque sequence --------- | 6 2 3 7 | | 5 1 4 8 | --------- Step 1: torque in sequence to 33 Ft/Lbs Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque. clearpixel.gif clearpixel.gif clearpixel.gif Foot pounds (Final torque) clearpixel.gif Note: Torque sequence --------- | 8 4 1 5 | | 7 3 2 6 | front --------- of engine | 6 2 3 7 | | 5 1 4 8 | Step 1: torque to 40 Ft/Lbs --------- Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.

Feb 07, 2009 | 1994 Oldsmobile Cutlass Supreme

1 Answer

Cylinder head


depends on engine code, and single cam or twin cam. check your code. D16W4 sohc stage 1. 29nm stage 2 72nm. D16Y5. stage 1 20nm. 2. 49nm. 3.67nm . 4. 67nm. there are 2 other codes for sohc engines these are the same as D16W4. DOHC engine as follows B16A2 stage 1. 29nm. 2. 83nm. hope this helps, if you are ot sure give m the exact engine code and i can verify.

Sep 05, 2008 | 1995 Honda Civic

Not finding what you are looking for?
2003 Mitsubishi Outlander Logo

381 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...