Question about 1993 Mazda MX-3

1 Answer

Treplacing water pump

How do i either remove the timing belt from a 93 mazda mx 3 to remove and replace the water pump or do it with out messing with the timing belt

Posted by on

  • boggsy69 May 15, 2009

    i need to replace the water pump how do i go about doing this

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 337 Answers

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can i replace the water pump in a 1997 Nissan pickup without messing with (replacing) the timing chain?


D21 Pick up? The water pump is not timing belt driven. It is drive belt drive with a pulley held on with 4 bolts.

So, yes, the water pump can be replaced without touching the timing components. :-)

Nov 22, 2011 | 1997 Nissan Pickup

2 Answers

Need a timing belt diagram for a 93 mazada mx3


http://remanufactured.com/Mazda2.2.JPG Try this

May 04, 2011 | 1993 Mazda MX-3

1 Answer

Timing belt


Take the car to a dealership

Feb 23, 2010 | 1993 Mazda MX-3

3 Answers

93 mazda mx3. has spark, gas, air.. but its just


it sounds like a starter, you can try hitting it and it shud work but you would have to get it replaced , also check to make sure the belts are tight

Feb 09, 2010 | 1993 Mazda MX-3

1 Answer

Change alternator belt in a mazda mx-3


If your engine are the 1,6 l , it is the same engine as my MX5 91.
You have to remove power steering belt first if you have one. Loosen the mounting bolt located behind the pump pulley, then loosen the tensioner bracket bolts( one on the engine bracket and one in front of the adjusting bolt). After unscrew the adjusting bolt and push down the pump. Remove the belt.
Now, it is the alternator. Loosen the mounting bolt located under the alternator, then loosen the tensioner bracket, but only the only in front of the adjusting bolt. Unscrew the adjusting bolt and pull up the alternator and remove the belt.
When you tightening the new belt, the belt should be able to make a 1/4 turn, to make sure it is not to tight.

Dec 16, 2009 | 1992 Mazda MX-3

1 Answer

How do you replace the water pump on a 2002 mazda 626 4cyl? does it interact with the timing belt?


hi from uk the 626 water pump is not driven by timing belt but by another drive belt so easy to change after removal of under wing cover to access /see pump b4 you remove drive belt would advise you to slacken off the water pump pully 1st while it is held by drive belt to prevent turning ? then with belt off /pully removed pump is more accessable hope this helps?

Dec 11, 2009 | 2002 Mazda 626

1 Answer

Instructions to replace water pump on 2000 Mazda Precidia


1. Depressurize and drain the cooling system. 2. Loosen the alterantor adjustment and remove the belt.
3. Remove the water pump pulley.
4. Remove all the timing belt covers.
5. Loosen the timing (camshaft) belt tensioner and slip the timing belt off the camshaft toothed pulley (ensure you do not move the positon of the camshaft)
6. Unbolt the lower radiator hose fitting and heater retrun pipe.
7. Unbolt the waterpump from the block (5 bolts).
8. Remove all traces of the old gasket before mounting the new pump (Permatex spray on gasket remover works well).
9. Install the new pump and reassemble in reverse order to above.

Jul 31, 2009 | Mazda MX-3 Cars & Trucks

2 Answers

Mazda astina water pump


It most likely runs off the timing belt. check there behind the timing belt cover.

Nov 25, 2008 | 1994 Mazda 323

Not finding what you are looking for?
1993 Mazda MX-3 Logo

200 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...