Question about Ford F-350

Open Question

Transmission range sensor in Ford F350, location

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
wfservices
  • 262 Answers

SOURCE: need to know location and how ro remove a

  1. Remove the Battery
  2. Remove the battery tray. You need to do this to access the TRS(transmission Range Sensor) If its 2.5 liter you need to also remove the air cleaner, and the battery box bolts(on bottom of box)
  3. Detach the battery positive cable push pin from the battery box.
f040794.gif
4.Raise and support the vehicle.
5.Disconnect the horn and left-hand front fog lamp electrical connectors. Detach the wiring harness from the securing clip.

3c42437.gif
  1. Lower the vehicle.
  1. Disconnect the battery junction box (BJB).
    1. Remove the cable ties.
    1. Unclip the BJB.
    • Position the BJB to one side.
    • 07ac510.gif
      1. Pull the horn and front fog lamp wiring harness through the hole in the battery tray.
      1. Detach the wiring harness from the pin-type retainers in the battery tray.

ee5813e.gif 12.Place the vehicle in NEUTRAL.
13.Remove the transmission range (TR) sensor.
  1. Disconnect the TR electrical connector.
  1. Remove the bolts.
  1. Remove the TR sensor.

31134fd.gif Special tools: TRS Alignment Tool
307-351 (T97L-70010-A)

I hope this is concise enough for you to change your sensor..Take care..Hey did I mention this information I posted is FREE!!!

Posted on Mar 27, 2010

Ad
emissionwiz
  • 83959 Answers

SOURCE: 1999 ford f350 engine code P0705 transmission range sensor warnin

P0705 - Trans Range Switch Circuit

Get under the truck and look where the trans shift linkage connects to the trans, there is a post that comes out of the trans, on that post u will see a large switch with multipile wires connected to it, that is the range selector switch, you need to remove the shift arm and a couple of bolts to remove the range switch, it is adjustable, u will see the slots, make sure u put the new switch in the same position as the old one or the truck may not start.

Posted on Jan 05, 2009

gypsycat00
  • 224 Answers

SOURCE: 1996 ford contour transmission range sensor

Transmission range sensor and neutral safety switch are the same thing (when you go to buy the part). It's at the top of your transmission. You'll see the shifting cable connected to it. Here are the instructions for adjustment:
Shift Control Linkage
The transmission shift linkage adjustments must be performed in the order in which they appear.

Column Shift

Place transaxle range selector lever in (D) (OVERDRIVE) position or D (DRIVE) position on vehicles equipped with a transmission control switch (TCS). A weight of 1.4 kg (3 lb) should be hung on the transaxle range selector lever to ensure the lever is located firmly on the (D) (OVERDRIVE) or D (DRIVE) position on vehicles equipped with a transmission control switch (TCS) detent.

Loosen manual control lever-to-control cable retaining nut.

Move transaxle manual control lever to OVERDRIVE position or D (DRIVE) position on vehicles equipped with a transmission control switch (TCS), second detent from most rearward position.

Tighten retaining nut to 17-23 Nm (13-17 lb-ft). Check operation of transaxle in each transmission range position. Make sure that park mechanism and transmission range (TR) sensor are functioning properly.

Floor Shift

Position transaxle range selector lever in DRIVE position against rearward stop. The floor transaxle range selector lever must be held in the rearward position using a constant force of 1.4 kg (3 lb) while linkage is being adjusted.

Loosen manual control lever-to-control cable retaining nut.

Move transaxle manual control lever to DRIVE position, second detent from most rearward position.

Tighten retaining nut to 17-23 Nm (13-17 lb-ft).

Check operation of transaxle in each transmission range position. Make sure that park mechanism and transmission range (TR) sensor are functioning properly.



To take it off, it's a couple of retaining bolts and a wiring harness.

Posted on Jun 29, 2009

  • 1 Answer

SOURCE: how can i fix my mazda 626 transmission range

The transmission range sensor aka neutral safety switch is located underneath the air filter on top of the transaxle and very easy to access. Replace this part (around $50) and it will solve your problem.
What happens is this, when your tranny warms up, it disperses heat to the sensor switch and if its faulty or worn out, will send faulty relays to the transmissiom computer module (TCM) and makes the transmission shift irratically (OD to 3rd and back while driving at freeway speeds). You tranny is not overheating like most people believe, its the switch. Mechanics are telling alot of people that their tranny needs replaced. Watch Out For These People!! They only want your money!!

Posted on Feb 13, 2010

SOURCE: i have a 2000 ford winstar with the engine light

Usually on Trans,on bottom of case,near oil pan. Follow shift cable and look for wire harness,going to it.

Posted on May 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of speed sensor


Vehicle Speed Sensor Removal & Installation - YouTube

? 8:47
www.youtube.com/watch?v=rAenb7qb3BY
Jul 4, 2012 - Uploaded by TheYoshiClan Speed Sensor Replacment Fix Transmission Shifting Problems ...10 Min Automatic Transmission Fluid Flush + Replacement (Most

Sep 16, 2015 | 2004 Ford F350

1 Answer

1995 f350 powerstroke wont start one other time had to drop shifter and put back to park before it started now it wont start the lights elect windows and glow plug cycles but no clicking noise just nothing


replace the transmission range sensor. Adjust the new sensor by loosening the bolts slightly, turning the key on, putting the truck in reverse, and turning until reverse light come on.

there are 2 possible sensors, depending on which transmission you have.

jturcotte_2379.gif

jturcotte_2380.gif

Oct 06, 2011 | 1995 Ford F350

1 Answer

I have a 2002 f350 superduty 4x4 crew cab with an automatic trans. Where is the transmission range sensor located?


It's on the side of the transmission. drivers side. Once you get under the truck you will see the shift cable going to the transmission. the range sensor is mounted on the transmission under the cable arm. easy to replace.

Feb 06, 2011 | 2002 Ford F350 Super Duty DRW Reg. Cab

2 Answers

Nuetral switch location? What does it look like


Hi, I'm assuming you have the AOD transmission. If the information I provide doesn't match with what you see, please get back to me with engine size and transmission, info, if possible. Below is a picture of the sensor and also the location on the transmission. Thanks for using FixYa.

jturcotte_157.jpgjturcotte_850.gif

Jan 17, 2011 | 1990 Ford F350

1 Answer

Where is my transmission range sensor located


On the side of the transmission. Look at the lever that the shift cable pulls on. The transmission range sensor is the black assembly under that lever with the wire connector going to it.

Dec 13, 2010 | 2000 Ford Explorer

1 Answer

Do you know how to fix the code - P2285 (ICP) on a 2003 Ford 350 6.0 diesel truck


DTC P2285 indicates the injector control signal circuit is out of range
so its either the ICP sensor located ontop of the passenger valve cover
or an open or shorted wire between the pcm and icp sensor

Jan 26, 2010 | 2003 Ford F350 Super Duty DRW SuperCab

2 Answers

Were can i find the transmission range sensor on a 2001 ford e 350 van


for the most part it on the transmission but give these websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local ford dealership in the parts department and they will give you a print out diagram showing you its location at the same time wish you the best of luck Michigan Man.

Oct 11, 2009 | Ford E-350 Super Duty Cars & Trucks

1 Answer

WHERE'S THE TRANSMISSION SENSOR?


The transmission range sensor is located where you shift lever is.

May 01, 2009 | Ford Ranger Cars & Trucks

2 Answers

1999 ford f350 engine code P0705 transmission range sensor warnin


P0705 - Trans Range Switch Circuit

Get under the truck and look where the trans shift linkage connects to the trans, there is a post that comes out of the trans, on that post u will see a large switch with multipile wires connected to it, that is the range selector switch, you need to remove the shift arm and a couple of bolts to remove the range switch, it is adjustable, u will see the slots, make sure u put the new switch in the same position as the old one or the truck may not start.

Jan 05, 2009 | 2008 Ford F-350

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,380 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

83959 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22441 Answers

gerry bissi

Level 3 Expert

4387 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...