Question about 1988 Chevrolet K1500

1 Answer

Clutch ingages all the way in new clutch

I installed a new clutch and it wont go in gear but if you turn the truck off and put in first and then start the truck it will go. But if you take it out of first to shift you can't get it in to gear had the flywheel turn could it slave? But i didn't open system to the slave need help?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 61,249 Answers

Well I can tell you this that the clutch has to much free play, I would check the slave cylinder for proper operation, but if it is defective the slave and mater are better replaced as a pair.

Posted on Dec 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why wont my 1988 ford f150 4 speed go in gear?


alpst sounds like your clutch disc is in backwards, DO you have a good strong clutch pedal feel?

Sep 10, 2014 | Cars & Trucks

1 Answer

Standard shift, v6, 3.2, and can't ingage shifter into gear. Replaced slave cylinder and master cylinder. Bleed unit, after starting it looses pressure on clutch pedal not allowing gear to ingage. With...


Sounds like you may have air trapped in the system.Try this trick.Remove the bleeder screw from the slave cylinder.Place your finger over the hole to act as a one way valve, allowing air and fluid to escape but not allowing air to get sucked back in.Then have someone stroke the pedal slowly making full strokes, keep an eye onn the resevoir so that it does not get low and fill the system with more air.If there is room turn a bottle of brake fluid upsidedown in the resevoir to keep it from running dry.After you have run a bottle of fluid through it replace the bleeder and pump and bleed the old fashioned way a few times.If there is air it should be gone.If clutch will still not disengage the something is wrong with clutch plate and or pressure plate.Good luck!

Mar 02, 2011 | 1992 Isuzu Trooper

1 Answer

Put car in reverse after car warms and it doesnt ingage until you push on the gas. It stays in the nuetral position


hi sound like the clutch is worn and your having to use the speed of the engine to help you ingage the gear.Does the clutch slip at all when driving in a forward gear ?

Sep 02, 2010 | 1993 Saturn SC2

1 Answer

How do i know if my whole clutch is out on my rodeo 99?... the pedal is easy to ingage half way down and im not able to switch gears


At a standstill put the car in 3rd gear and try to get the car to move. If it stalls you clutch is fine. If you able to move the vehicle w/o stalling you need a new clutch.

Apr 09, 2010 | 1999 Isuzu Rodeo

1 Answer

Dodge dakota 87


Hi, Just a thought, is the clutch drive plate in the right way round?
Press the Blue Button please if sorted!
Paul 'W' U.K.

Feb 08, 2009 | 1995 Dodge Dakota

1 Answer

I put a new clutch in it and every thang went good but went to ingag the clutch and it wont go in to gear in lees the truck is not streted when u put the truck in gear then step on the cluch it trys to go...


HI there... You might be right. If you can't put the truck into gear then you might have air in the slave. Try beeding it and see if that helps.

Jan 28, 2009 | 1995 Dodge Dakota

3 Answers

Nissan sentra 1997 starts but wont go when put in gear


is it a manual or automatic?if it's manual check clutch.if it is automatic check transmission fluid.

Dec 02, 2008 | 1997 Nissan Sentra

1 Answer

Wont go into gear but tries to engage gear with clutch depressed


put a new clutch pressureplate in it . it is gone

Nov 11, 2008 | 1994 Saturn Sl

1 Answer

New Clutch well not ingage


I have run into this problem befor a customer brought in a car that he tryed to replace the clutch in and had the same issue unfortunatly the fix was to remove the clutch disc and flip it over as it is in wrong

Oct 09, 2008 | 2003 Hyundai Tiburon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...