Question about 2000 Hyundai Elantra

1 Answer

Radio malfunction I got a jump one day and after that my radio did not work. There are no numbers or letters displayed, it just lights up like there is power going to it but nothing else.

Posted by on

  • yadayada
    yadayada May 11, 2010

    heck the owners manual for reset procedure, have you checked the fuse?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 58 Answers

You need to check the fuse because it is likely that it overloaded during the jump

Posted on Dec 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My display lights on the radio go in and out


Check internal harnesses connections or some loss ground wire.

Mar 23, 2012 | 1998 Ford Explorer

2 Answers

I need to know if the shift motor wiring runs through the radio harness. The radio was ripped out and now the 4x4 wont shift . I checked the shift motor and it still works fine, just not at the switch.


is it possible that the switch is not plugged in all the way,? i know this is a stupid question, but you said the radio was ripped out as maybe stolen, now the other day i pulled the radio out of mine as the display stopped illuminating and the same thing happened. the 4x4 switch worked fine before, i started to look around wiggle things when the plug fell onto my hand, i plugged it in and it started to work again,ok fixed! next day, now the 4hi and 4lo lights flash three times and stop then a few min later flash three times and stop, and wont switch into 4x4 lo or hi stuck in auto 4x4

Jan 14, 2011 | 2002 Ford Explorer

1 Answer

Radio/cassette player not working


yes if you have the code number

Jul 16, 2010 | 1996 Honda Accord

1 Answer

My battery went flat the other day and i put in


If it is saying code 2, thats not a code to input anything. Its a error code for a hardware malfunction.

May 03, 2010 | 2002 Hyundai Accent

3 Answers

CHANGED BATTERY AND NOW THE RADIO WILL NOT WORK. ONLY THING THAT COMES UP IS CODE 1,2,3,4,5,6


ur anti-theft deterrent has activated on ur radio and is locked need to notify a dealer the code is part of vehicles security system and dealer has code ---call first or if have owners manual either will advise how to retrive radio id number which is needed

Feb 01, 2010 | 2003 Honda Civic

1 Answer

I jumped a car and radio/navigator displays shut off and Anti theft light is now blinking. I have a code but for some reason the radio is not accepting or I'm doing it wrong. The display doesnt show...


with the key on engine off the radio should display the word code if this is not been displayed at all check your fuses if they are good try removing your radio and unplugged connectors. once plugged back in if you don't see the word code displayed then your radio is shorted out

Sep 09, 2009 | 2007 Honda Odyssey

1 Answer

Radio display


There is no bulb in the radio to replace it is LED display you will have to replace radio.

Jul 29, 2009 | 1999 Mercury Cougar

1 Answer

Problem with entering anti-theft radio code for Honda Fit: The radio screen says: "Enter Code:" I enter the confirmed correct code, but when doing so when the actual code (all numbers) turn into letters or...


when you use the "preset keys" (the keys on the radio with numbers on them) to enter the code, each time you press a code number, a letter appears [c, o, d, e]. once the word is spelled out, from entering the correct 5 digits, the radio is reset, ready to go.

BUT if you miss a number, enter a wrong number, whatever, each number pressed, still makes a letter appear from the word "code". once the word is spelled out, by entering ANY 5 numbers, if ANY of the 5 is wrong, the radio displays a message "Error" and then a number 1 thru 10.

When you see the word "Error..."

the next preset button you push, starts the whole thing over again. The radio says "Enter code". That is when you enter the 1st of the 5 digits, the letter C appears, enter the next digit, the letter O appears, enter the next digit, the letter D appears, enter the last digit, the letter E apperas, the radio is reset, ready to go, if you got the 5 correct numbers entered.

you have 10 chances to enter the right 5 digit code. Each wrong try of 5 digits yeilds a display of "Error 1", "Error 2", "Error 3", etc 'till you get to 10 incorrect tries of 5 digits each.

If you dont get it right in 10 tries, you have to leave the radio "on" for an hour, then it will let you start the 10 tries over again.

Good luck!

Apr 26, 2009 | 2007 Honda Fit Sport Hatchback

1 Answer

Radio does not work.


what you need is the radio code to get rid of the error code just disconnect both battery cables touch them together for approx. 30 seconds reconnect cables turn on the radio it should read code there might be a credit card size card in the glove box with the radio code if not look for a sticker in the glove box this is your radio code if not then the radio has to be removed to get the radio seial# then call a honda dealer up give them this number and they can look it up or if your bought the car new call that dealer up they should have this in their history

Nov 14, 2008 | 2003 Honda Accord

10 Answers

2005 Honda accord radio code


I have a 2005 accord, and this worked for me.

1)Turn on engine w/ radio off. Push and hold down buttons 1, 6, and power.
2)I got the letter "U" followed by 4 numbers and then letter "L" followed by 4 numbers; write down those numbers.
3) Go to Honda.com
4)Click on Owners home link.
5)On that page you should see an option for retrieving radio codes for honda/acura
6)you will need to enter Vin#, home phone number and zip code fo the original owner. This will then give you the radio code..

Jun 19, 2008 | 2005 Honda Accord

Not finding what you are looking for?
2000 Hyundai Elantra Logo

Related Topics:

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...