Question about 1995 Mercury Villager

1 Answer

95 MERCERY VILLAGER WONT START

I HAVE POWER FROM THE BTTERY TO THE STARTER WENT I TEATED THE OTHER EVERYTHING WENT OFF AND IT MADE ATICKING SOUND

Posted by on

  • Rabindra Robinson May 11, 2010

    check the ground cable and make sure it is clean and tight and then try to start the vehicle sounds like the circuit is not complete.!!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mercury Master
  • 4,369 Answers

Check the steel battery connections at the battery. Also check the 2 smaller wires at the ositive post too.
http://autos.groups.yahoo.com/group/villagerquest/

Posted on Jan 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My car wont start but everything else turns on don't know what to do charged the battery and it worked, jumped the car before, and it worked now none of those work at all, but everything works just...


its your starter and it went bad on you because there is a main cable that comes from the Negative battery terminal that goes to the cylinoed of the starter and pushes the starter into the engine block that starts the engine but to find out this that you have to get the hood up and have someone outside to hear if there is any clicking sound by the starter which shows it is engaging to start car. Check first the starter to see if it makes a clicking sound.

Jun 09, 2011 | 2005 Chevrolet Cobalt

1 Answer

Have a 1995 Mercury Villager that wont start have replaced the starter, battery, cables, switch, what else can it be please help.


I assume it won't crank. Are you getting power to the small terminal to the starter when someone turns the key? Can you jump power to it and get it to crank? It could be a bad neutral safety switch.

Mar 27, 2010 | 1995 Mercury Villager

3 Answers

2003 Dodge Grand Caravan wont start


disconect the alarm system completly and see if it stats, if the problem persits then your stater is no good

ps,try jumping the starter at the starter(power to the selenoid from the battery

Sep 07, 2009 | 2003 Dodge Caravan

1 Answer

94 mercury villager wont start


power on the small terminal of the starter solenoid when you turn the key?

Jul 11, 2009 | 1995 Mercury Villager

2 Answers

95 Mercury Villager will not start


check/replace the starter relay switch in the relay box under the hood. The relay box is located on the front right of the engine compartment. easy fix, inexpensive part if that is the problem.

May 02, 2009 | 1995 Mercury Villager

1 Answer

1999 mercury villager wont start


Check the battery first. Or try jumping it. Battery may not have enough juice to turn the motor.

Mar 04, 2009 | 1993 Mercury Villager

1 Answer

95 mercuy villager wont start


you probably have a bad cable end on you battery cables where they connect to the battery. The steel clamps ****. replace with typical lead ends, @$6

Dec 05, 2008 | 1995 Mercury Villager

1 Answer

95 MERCERY VILLAGER WONT START


have you checked to see if the alternator is working? If it isn't the battery is being drained. You may have lights and all but the cranking power is drained therefore you don't have enough juice to start it. So check the alternator and if possible do an obd 2 scan at autozone or advance auto

Dec 02, 2008 | 1998 Jeep Cherokee

Not finding what you are looking for?
1995 Mercury Villager Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...