Question about 2000 Mercury Sable

2 Answers

I have a 2004 Mercury Sable and don't know how to replace the low beam headlights. I bought the Silverstar bulbs but can't figure out how to access and place with the new ones

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the owners manual that shows how to replace all the light bulbs. if you have not figured this problem out. i own a 2004 Sable, also. I am having issues with my battery dying all the time but the system check says that my charging system is OK. but at AutoZone thier machine says the alternator is only putting out 12-13volts and it should put out 14.5volts...any suggestions besides calling a service department

Posted on Jan 23, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 180 Answers

I suspect the alternator a little. An alternator has a low-charge circuit... and a high-charge circuit.. The low-charge circuit usually provides enough charge to keep the battery charged enough for daylight (low-load) use.... BUT it requires the high-charge circuit to provide enough charge for night time (high-load) use. The best symptom of this is your car continues to start until you use it at night. However, I suggest you put a brand-new battery in it before you do anything else, or at least have it tested by somebody you trust.

Posted on Sep 20, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Headlights, low beams work fine. when high beams are turned on, the left side goes out completely and there is no change to the right side.


Mercury Sable - YouTube

? 6:06
www.youtube.com/watch?v=Mlb1V5vNgFM
Jan 3, 2012 - Uploaded by 1A Auto Parts http://www.1aauto.com/1A/HeadLights/Mercury/Sable/1ALHP00223 ... Find out why. Close. How to Install Replace Headlight and Bulb Mercury Sable 00-05 ... How To Install Replace Fog Lightand Bulb 00-03 Mercury Sable

Oct 08, 2015 | 2005 Mercury Sable

1 Answer

What kind of headlight bulbs are used for this type of vehicle? or what type?


2004 DODGE Durango
High & low beam headlamp
H13 (9008)
H13ST SilverStar: The brighter and whiter light. Up to 35% brighter, up to 30% more downroad visibility and up to 35% more sideroad visibility.
H13XV XtraVision: The brighter light for upgraded performance. Up to 30% brighter light and up to 25% more downroad visibility.

Mar 10, 2011 | 2004 Dodge Durango

1 Answer

Can the headlight assembly of a 2004 Toyota Sienna be disassembled to replace a faulty low beam bulb?


The whole bulb will have to be replaced. One bulb has high/low beam. You should be able to access it from behind the light assembly. You should have a locking device at the headlight assembly and be able to pull the assembly out to make it easier.

Sep 09, 2010 | 2004 Toyota Sienna

1 Answer

Need to replace low beam bulbs in 2004 GMC envoy. Help?


Lift hood, at top of each headlight assembly look for two L-shaped tabs. Pull these tabs straight up, this will release the headlight assembly. Lift assembly forward to gain access to rear of assembly. There two rubber caps, the top one is for access to the low beam and the bottom for the high beam bulbs. Remove the appropriate cap, grasp bulb socket and turn CCW to release. Unplug bulb from socket by releasing catch on side of socket, install new bulb, DO NOT touch bulb glass with fingers. Reverse steps to re-assemble.

Aug 26, 2010 | 2004 GMC Envoy

5 Answers

Where can I buy Sylvania low beam bulbs H11B for 2009 Elantra


Hi don..
According to positive reviews (for the seller), these one leads Sylvania 9006 SU SilverStar Ultra Halogen Headlight Bulb Low Beam Pack of 2 (+affordable price)
I hope it was helpful.
Enjoy

Nov 27, 2009 | 2009 Hyundai Elantra

1 Answer

What size bulb is an audi s4 headlight and fog light?


SYLVANIA H7 SILVERSTAR HIGH PERFORMANCE HALOGEN HEADLIGHT BULB -- 55 Watts, Single C-8 filament for use as either high beam or low beam; 100 percent legal halogen headlight bulbs; Features the whitest and brightest light colour similar to daylight for safer night driving; Meets all US FMVSS 108 and Canadian CMVSS 108 requirements. Fits Driver or Passenger Side Driver or Passenger Side Fits the following vehicle/s
2004 Audi S4 Base 8 Cyl 4.2L 2004: Base; 8 Cyl 4.2L RAMPAGE FOG LIGHT, BLACK METAL HOUSING, With round clear lens; Includes 100-Watt H3 halogen bulb, one lamp and a single bolt mounting system; Provides better illumination Fog Light

  • Fits the following vehicle/s: 2004 Audi S4 Base 8 Cyl 4.2L 2004: Base; 8 Cyl 4.2L;

Jun 24, 2009 | 2004 Audi S4

1 Answer

Low beam, driver's side headlight out. Bulb, fuse or entire apparatus replacement? I have the same problem, low beam, driver's side headlight is out but I can't figure out how to get the bulb out to...


The low beam bulb needs to be replaced. Go to an autozone store as they will sell you the bulb, and even assist you in their parking lot with installing it.

May 06, 2009 | 2004 Lexus ES 330

1 Answer

Passenger Low Beam Headlight needs replacement!!!


You could remove the air filter cover and then you will be able to reach the bulb.

Apr 12, 2009 | 2004 Chevrolet TrailBlazer

1 Answer

How to replace low beam bulb on 2004 baja


I was able to locate an owners manual for the vehicle. The large plastic weatherguard protecting the headlight bulb connections needs to be rotated CCW about 90 degrees, and removed to provide access to the bulbs. Then remove the center connection for the low beam and release the spring clip retainer to release the low beam bulb. Replace with new bulb and reconnect/reinstall retainer clip, center connector wire, and weatherguard. Note that this is the procedure for the Turbo Baja...non-Turbo model is different.

Jan 02, 2009 | 2004 Subaru Baja

Not finding what you are looking for?
2000 Mercury Sable Logo

296 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...