Question about 1988 Chevrolet Corsica

2 Answers

Corsica stalls at stop signs

My wifes corsica runs fairly well on the road, except when he stops at stops signs it dies. it starts up ok again no problem , just stalls at stop signs
ps :
when it does idle , it is a little rough idle

Posted by on

  • 1 more comment 
  • mr_b4 Dec 05, 2008

    i havent had a chance to try your ideal yet, i have been real busy at work will let you know soon

  • mr_b4 Jan 30, 2009

    i no loger have the corsica , fellas

    gave up an bought a new car , thanks for your rplys ....jess

  • Anonymous Mar 23, 2014

    will not idle runs really rough then stalls at a stop

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 261 Answers

Sounds like the EGR valve is sticky, take a small screw driver and tap the valve when the engine is at idle and you will notice a change in the way the engine runs, if the vehicle smooths out disconnect the valve and drive the vehicle and it should not cut off please let me know and dont forget to rate me!!

Posted on Dec 02, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 122 Answers

Try putting fuel injector cleaner in the gas tank....sounds like it might be dirty injectors

Posted on Jan 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 mustang 3.8L v6 just had head gasket and intake replaced. Running ok except for ticking when engine is cold. (Didn't do that before). This morning, I was coasting to a stop w/o clutch Engaged or...


they probably didn't set the valve lash correctly one of your cylinders isn't firing correctly get a cylinder compression tester and test each cylinder

Oct 16, 2014 | 2001 Ford Mustang V6

1 Answer

99 Volvo V70 seems to stall and vaporlock, after running. The car shows an ETS light, which I understand to be the Electronic Throttle Sensor. It has shown this light for over a year, but has not given...


change your fuel filter ..your vehicle will run but your fuel pressure is weak ..also after this clean your fuel injectors by pouring injection cleaner in your gas ,,it will correct itself..Also ,,if none of what I stated works ,,Spark plugs and new spark plug wires needed ,,Lastly your fuel pump

Oct 23, 2013 | 1999 Volvo V70

2 Answers

Ok i have a 92 chevy corsica and after it has been running awhile when i go to slow down to stop at a stop sign the car dies how do i fix it


well if it runs normal when your driving then it sounds like a gas problem or maybe you need to adjust your idle a little bit, other than that it could be fuel filter or carburetor adjustments

Apr 15, 2011 | 1992 Chevrolet Corsica

1 Answer

When slowing from highway speed to a stop the


try cleaning or replacing the EGR valve? hope this helps

Apr 14, 2010 | 1992 Chevrolet Corsica

1 Answer

Stalls when I stop and start again. Speedometer


your speed sensor is gone.. you have an electronic odometer so when the electricity passes improperly.. you get what you got!!

Feb 26, 2010 | 1998 Jeep Cherokee

1 Answer

1992 chevy corsica runs rough,stall or dies after stopping


Sounds the EGR valve and EVP sen is bad even if you tested it. The EGR valve cntrols idle and if carbon up will make the car stall or idle high and low (rpms going up and down) This was common on all cars during that time. I would say replace the EGR valve and senosr. This should take care of the problem. One more thing have the fuel pressure check on the car.

Mar 20, 2009 | 1992 Chevrolet Corsica

1 Answer

My Chevy Corsica 87 stalls when I have to stop at a light .


When it stalls, does it start back up and then die again when you put it in drive or just not start back up?

Mar 02, 2009 | 1987 Chevrolet Corsica

1 Answer

Car stalling after turns on, dies while driving


First of all you should check your transimision fluid in your gearbox, if the car is automatic, and refill until the proper sign.
Utherwise you should check the clutch if it works properly, maybe you have to adjust the clutches gap.

Jan 28, 2009 | 1987 Ford Bronco II

3 Answers

Stalling at full stop


may be a lockup solinoid , common on the 3 speed automatics !

Dec 20, 2008 | 1996 Chevrolet Corsica

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

620 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...