Question about 2001 Chevrolet Silverado 1500

2 Answers

Code for reseting the Change Engine Oil Light

Can i get the code to reset my change engine oil light?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 121 Answers

Depress pedal fully 3 times within five seconds, sorry

Posted on Dec 05, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 121 Answers

You don't need a code. Turn the key to the "run" position, depress the gas pedal fully within five seconds, either turn off ignition or start the vehicle. The light should flashh a couple of times and then go out. I hope this helps.

Posted on Dec 03, 2008

2 Suggested Answers

  • 79 Answers

SOURCE: how to reset an oil change light

Turn the key on (do not start). Wail till the message comes up saying change engine oil. When message comes up hit the gas three times.

Posted on Apr 25, 2009

  • 9 Answers

SOURCE: reset engine oil change light

turn the ignition on and press the gas pedel three time and the oil light will blink and the go off the then the system will be reset

Posted on Apr 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reset my manint req's light after an oil change on a 2003 Honda pilot


Reset oil service light Honda Pilot. From years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012.
How do you reset oil service light Honda Pilot. From years: 2003, 2004, 2005.
  1. Turn off the engine. Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting).
  2. Hold the button for at least 10 seconds, until the indicator resets.
  3. Turn the ignition off and then start the engine to verify the indicator has been reset.
How to reset oil service light Honda Pilot. From years: 2006, 2007, 2008, 2009, 2010, 2011, 2012.
Resetting the Engine Oil Life Display if maintenance service is done by someone other than your dealer, reset the maintenance minder as
follows:
  1. Turn the ignition switch to the ON (II) position.
  2. Press the select/reset knob repeatedly until the engine oil life is displayed.
  3. Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.
  4. Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
All information is taken from the Honda Pilot owners manual.

Mar 09, 2015 | 2003 Honda Pilot

1 Answer

How to reset warning lights


Welcome to FIxYa.com

Oil Change light:

To reset the "CHANGE OIL" light, turn the ignition switch to the run position with the engine off. Fully depress and release the accelerator pedal three times within 5 seconds. The light will flash twice and go out.



Maintenance warning light? MIL? Check engine? Maintenance Required?

You will have to go to Auto Zone to have the code read and then fix the code problem and then clear code with code reader


Regards, Lee Davidian


Thank you for using FixYa.com

Nov 05, 2010 | 2001 Buick Century

1 Answer

1998 Buick Park Ave., Check engine light is on, the computer displays Oil Change


The check engine light and the oil change indicator message are more than likely not related. You can toggle through the functions and get the oil life % to display then push the reset and hold it for a few seconds and it will reset the oil life indicator message. It should read oil life 100% after reset. (I would change the oil and filter if you have not already done so.)

The check engine light means you are setting an engine code, if it stays on, it is a hard code, if it is intermittant it is a soft code. Have it checked with a scan tool -- plug into your a.l.d.l. connector below the dash on the drivers side and read the code. Autozone and other places will do this for free.

Sep 28, 2010 | 1998 Buick Park Avenue

2 Answers

How to do I reset the maintenance service light on my 2007 Chevy Trail Blazer


there is no light for emissions testing on this vehicle. there is a ses light that can come on, indicationg a problem with the engine or transmission electronic system. this will require a scan tool to pull trouble codes. there is another light called oil life monitoring that needs to be reset after oil changes, which I suspect is what you are seeing. here is a picture of the light and the instructions for resetting.,

The Engine Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a CHANGE OIL SOON message being turned on, reset the system.
After changing the engine oil, the system must be reset as follows:
  1. Turn the ignition to RUN, with the engine OFF.
  2. Press the information and reset buttons on the Driver Information Center (DIC) at the same time to enter the personalization menu.
  3. Press the information button to scroll through the available personalization menu modes until the DIC display shows OIL LIFE RESET.
  4. Press and hold the reset button until the DIC display shows ACKNOWLEDGED. This will tell you the system has been reset.
  5. Turn the key to LOCK.
If the CHANGE ENGINE OIL message comes back on when you start the vehicle, the Engine Oil Life System has not reset. Repeat the reset procedure.



485d3b2.gif

Sep 09, 2010 | 2007 Chevrolet TrailBlazer SS

2 Answers

Reset engine oil change light


turn the ignition on and press the gas pedel three time and the oil light will blink and the go off the then the system will be reset

Apr 07, 2010 | 2005 Chevrolet Equinox

2 Answers

LEXUS LS 2004 Maint Reqd (Master warning light) how I can switch off after change the oil engine?


You can disconnect your battery for 15 minutes or pull the fuse for an ECM or PCM fuse, but the best way is to visit any local repair shop. Most shops will have a universal Check Engine Light Code Reader that can quickly and safely reset check engine light trouble codes. It should take about 30 seconds.

Ask your local service center if they could reset the check engine light with a Check Engine Light Code Reader.

Dec 14, 2009 | 2004 Lexus LS 430

3 Answers

Change oil light came on


In your owners manual there is a procedure listed for resetting thr oil change reminder/maintenance light. Some vehicles you turn key on..do not start it.. step on gas pedal all the way to the floor 3 times... then key off. others haver u hold the trip odometer reset button when u turn key on.
It varies from manufacture to manufacturer.

Jul 10, 2009 | 2006 Isuzu Ascender

1 Answer

Reset engine oil change monitor


at 7000 you should definetly change oil, but depending on the make and model of your vehicle, to shut off of the check engine light will vary from a simple procedure in your owners manual, to having a obd 2 code detecter hooked up to identifie and delete codes

Jun 14, 2009 | 2000 Dodge Durango

4 Answers

Reset oil life display after oil change?


THIS SHOULD BE IT.
How do I reset the Engine Oil life monitor and how does it work? TO reset To reset the Engine Oil Life monitor do the following:
Reset Oil life in NAV/DIC by (with car running) going to INFO>Oil Life>RESET
Press and HOLD until XXX turns to 100%
How does it work? The oil life monitor is a pretty sophisticated algorithm.

GM "The GM Oil Life System will automatically adjust the oil change interval based on engine characteristics, driving habits and the climate in which the vehicle is operated."

Feb 09, 2009 | 2007 Cadillac CTS 3.6L

2 Answers

Service engine soon light on. failed aircare.showing code po341 .


The service engine light DOES NOT mean change your oil. The change oil or maintence required light means change oil. The service engine light is the same as a check engine light and means that there is something (not always really bad) is going on with your motor and need someone that has a code reader to let you know what the code is. Yes that code is a camshaft position sensor code. It is located on the passenger side of the engine in the "valley" between the two cyclinder heads. Its not too hard as long as you have some tools and some skills. Its easiest to remove the serpentine belt and remove the bolts for the power steering pump. That way you can move the pump a little to gain better access to remove the cam sensor. Just replaced one yesterday on a 99 century. Hope that helps!

Dec 16, 2008 | 1999 Buick Century

Not finding what you are looking for?
Cars & Trucks Logo

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...