Question about 1994 Chrysler New Yorker
When you turn the key to the start position do you hear the click of the starter solenoid?
If you do either your starter is faulty or you do not have enough voltage to power the starter. Your lights do not need much voltage nor the solenoid however the starter requires 12.5 volts to start properly. If you do not hear the click check to see if the car is in park properly. The vehicle will not start if the car is not properly in park or neutral...try it in neutral. Check the starter relay, ignition switch, park/neutral start switch.
Posted on Dec 02, 2008
Check your starting motor, this is the most commonest faul in cars , the pre engage on top of the starting motor becomes damp and sends no signal, change starter
Posted on Dec 02, 2008
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
HI, I'm reading your problem,
Let me explain something about your car.
2005 Ford Taurus, The key on that car has Chip inside of the key and receiver on the ignition switch,
Check if the key you are trying to use is Black and has a plastic head.
If not you need a key with that characteristics.
But if you have the right key, Remenber if you had drop on the floor, or hit with something,
Because some times they come damaged, with insignificat thins.
Remenber if you left the key close to a magnets like speakers.
If nothing aply at your case, you need to call a place Aloha Smith, they have the computer to program or reprogarm your key. IF not you can't start your car.
OK.. I hope this information work for you.
Thank's for submit yous question on fixya.com
Posted on Jul 10, 2008
SOURCE: 96 cavileir key switch
chances are your only option is to replace the ignition switch it appears that one of the pins in the tumbler is jammed and chances of it working again is remote.
Posted on Aug 29, 2008
SOURCE: car engine wont turn over
it sounds like either the key is going bad (chip inside) or the PAT's immobilizer system is not detecting a key is inserted with the correct code. If you remove the column surround you will see connectors just make sure all of these are secure, watch the yellow one do not disconnect it as its the airbag and theres a chance of it deploying.
Also try your spare ignition key if you have one.
If all is ok i'm afraid you may need to make a trip to ford for them to diagnose, the pat's system works well almost too well sometimes. i deal alot with them while installing remote starts and when they go wrong its almost always the dealer to resolve it. They have the computer software to test the system.
Posted on Nov 28, 2008
sounds like ignition switch has gone bad. Its located under dash on steering colume. when there going bad what you discribe is how it acts. chg. ignition switch.
Posted on Feb 01, 2009
Tips for a great answer:
Dec 01, 2017 | Ford Cars & Trucks
Nov 30, 2017 | Cars & Trucks
Aug 29, 2013 | 2001 Pontiac Grand Am SE
Jun 12, 2013 | Cars & Trucks
Jun 13, 2012 | 2005 Saturn ION
Sep 06, 2009 | Chevrolet Tahoe Cars & Trucks
Jul 20, 2009 | Chevrolet Monte Carlo Cars & Trucks
May 29, 2009 | 1994 Chevrolet Camaro
Aug 02, 2008 | 2007 Chevrolet Monte Carlo
312 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: