Question about 2001 Audi A6

1 Answer

I enter the code for a6 and phono comes up on display

I got new battery when i entered the radio code i might have hit wrong buttons to log it in now phono keeps coming up in radio display and still not working

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 4 Answers

Try entering it again, also try changing from different modes on the radio.

Posted on Jan 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Help please!!! am trying to unlock my audi 2001 a6 radio thats on SAFE..i followed a step, and i got the code which say 21112 but i couldnt put it in...i need help please. dont have enough money to take it...


Press the p.scan and RBDS buttons at the same time, when done correctly the display should change from safe to 1000, then use the 1234 buttons under the display to enter the code.

You may have the wrong code it should be a 4 digit code.

Mar 22, 2012 | 2001 Audi A6 1.8

2 Answers

Hi I got a 2002 audi a6 the radio displays safe but even if I keep scan and rds buttons pressed nothing happens.wat is the solution


it depends on year of car and make of RADIOHERE IS THE SETTINGS FOR A 2002 AUDI A6 Quattro V6 2.7L Turbo (APB) engine code
For the Audi Concert Radio
YOU STILL NEED YOUR RADIO CODE TO ENTER THIS!!!!!!!!!!!! tell me if this work for you
Entering Anti-theft Code

The following is the procedure to re-activate the radio if the display shows "SAFE". It is important that the procedure be followed in the correct order.

1. Turn on radio. The radio display shows "SAFE".
2. Press the FM2 and RDS buttons simultaneously and hold until "1000" shows on the display. Release the buttons. Do NOT press these buttons again, otherwise the radio will consider "1000" to be the code.
3. Use Preset buttons 1 ... 4 to enter the four-digit code number from your radio card. Preset button 1 corresponds to the first digit, Preset button 2 corresponds to the second digit, etc. Each press of the button increments the number by 1.
4. Once the code shown on the display is correct, press the FM2 and RDS buttons simultaneously and hold until the word "SAFE" appears in the display, then release the buttons.
5. The radio should unlock and be usable shortly afterwards.
6. If an incorrect code is entered, the word "SAFE" appears, first flashing and then continuously. You can repeat the above steps to unlock the radio once more, the number of attempts will be shown in the display. If an incorrect code is entered again, you radio will be locked for about one hour. After one hour - the radio must stay on and the key must remain in the ignition lock - if the display goes out, the you can repeat the above procedure to unlock again. The cycle - two attempts, one hour lock-up - still applies.
7. If you lose your radio code, contact your Audi dealer.

Note: Some European market Concert radios have a TP button instead of the FM2 button, so the description above with those units would require pressing the TP and the RDS buttons simultaneously.

Dec 03, 2010 | 2002 Audi A6

1 Answer

How do i reset a sterio code for a 2000 audi a6


urn on radio - the word SAFE will appear in the display. Press th P.SCAN and RBDS buttons simultaneously and hold them down until "1000" lights up in the display.Release buttons.Do not, under no circumtances, continue holding them down or press them once again. This will cause the radio to consider the number 1000 to be the input code.Use station buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use the button 1 to enter the first number 2 for the second number 3 for the third number and 4 for the last number.Once you have entered the code and it shows on the display,press the P.SCAN and RBDS buttons down again simultaneously and hold them down until the word SAFE appears in the display.Release buttons. Soon afterwards a frequency will be displayed.

Dec 15, 2009 | 1996 Audi A6

1 Answer

My audi a6 radio has a SAFE message in the screen what it does mean?


Did you disconnect the battery or run it down? This message means you must enter the correct code. If you do not have the code contact your Audi dealer. I'm not sure which model you have but these are the instructions for Symphony 1.
I'm not sure if this also applies to Symphony 2 (which has a built in single slot 6 CD changer)

Switch on - display shows SAFE as you indicate.
Press and hold TP and RDS buttons at same time until 1000 appears.
Release buttons (dont touch again or 1000 will be entered as the code).
Using station select buttons 1 to 4 enter code. Use button 1 to select first digit of security code, button 2 for second digit etc (buttons 5 and 6 cannot be used). So, say the code is 5238, you'd press '1' five times, '2' twice, '3' three times and button '4' eight times.
Once code is entered press TP and RDS buttons together and holde until SAFE appears
Release buttons and a radio frequency will appear in the display.


If you accidently enter the wrong code the word SAFE will start flashing. You get ONE more chance to go through this procedure and enter the correct code.
There is a more complicated procedure to go through after this with one hour time delays between attempts.
Curtorsey Audi Owner's Club:

Dec 10, 2009 | 2006 Audi S4

1 Answer

Entering radio code


Turn on radio - the word SAFE will appear in the display. Press th P.SCAN and RBDS buttons simultaneously and hold them down until "1000" lights up in the display.Release buttons.Do not, under no circumtances, continue holding them down or press them once again. This will cause the radio to consider the number 1000 to be the input code.Use station buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use the button 1 to enter the first number 2 for the second number 3 for the third number and 4 for the last number.Once you have entered the code and it shows on the display,press the P.SCAN and RBDS buttons down again simultaneously and hold them down until the word SAFE appears in the display.Release buttons. Soon afterwards a frequency will be displayed.

Jun 07, 2009 | 1998 Audi A6

2 Answers

Dead Battery equals Stereo lock


You must get the 4 digit security code and enter it into the radio by pressing the AM and FM2 buttons at the same time. Then enter code via the preset buttons. Press button #1 until you get the first digit of the code then press button #2 until you get the 2nd digit and so on for the 3rd and 4th digits. when code is on the display press the AM and FM2 buttons again and radio should come back on. if it reads safe you have the wrong code #. You can get the code from a dealer for a small fee. They need to remove the radio to get a serial # on the radio chassis.

May 27, 2009 | 1998 Audi A6

1 Answer

Cannot unlock the radio on my SAAB 9000 CDE


I have a Saab 900 -97 with a similar problem. I just solved it yesterday on my car. Hold the Band button in for like 10-15 sec when you see "Code In", It clears the error log in the radio. If it doen´t work, enter a wrong code so the code hangs on the display and then press the band button to clear the error log. It worked on my car, good luck!

/Tomas

May 19, 2009 | 1994 Saab 900

2 Answers

HOW TO UNLOCK RADIO 4 AUDI A6 1999


Turn on radio - the word SAFE will appear in the display. Press th P.SCAN and RBDS buttons simultaneously and hold them down until "1000" lights up in the display.Release buttons.Do not, under no circumtances, continue holding them down or press them once again. This will cause the radio to consider the number 1000 to be the input code.Use station buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use the button 1 to enter the first number 2 for the second number 3 for the third number and 4 for the last number.Once you have entered the code and it shows on the display,press the P.SCAN and RBDS buttons down again simultaneously and hold them down until the word SAFE appears in the display.Release buttons. Soon afterwards a frequency will be displayed.

Mar 12, 2009 | 1999 Audi A6

1 Answer

I have a 1999 Audi A6.


Entering anti-theft code The following is the procedure to re-activate the radio if the display shows "SAFE". It is important that the procedure be followed in the correct order.
  1. Turn on radio. The radio display shows "SAFE".
  2. Press the P.Scan and RBDS buttons simultaneously and hold until "1000" shows on the display. Release the buttons. Do NOT press these buttons again, otherwise the radio will consider "1000" to be the code.
  3. Use Preset buttons 1 ... 4 to enter the four-digit code number from your radio card. Preset button 1 corresponds to the first digit, Preset button 2 corresponds to the second digit, etc. Each press of the button increments the number by 1.
  4. Once the code shown on the display is correct, press the P.Scan and RBDS buttons simultaneously and hold until the word "SAFE" appears in the display, then release the buttons.
  5. The radio should unlock and be usable shortly afterwards.
  6. If an incorrect code is entered, the word "SAFE" appears, first flashing and then continuously. You can repeat the above steps to unlock the radio once more, the number of attempts will be shown in the display. If an incorrect code is entered again, you radio will be locked for about one hour. After one hour - the radio must stay on and the key must remain in the ignition lock - if the display goes out, the you can repeat the above procedure to unlock again. The cycle - two attempts, one hour lock-up - still applies.
  7. If you lose your radio code, contact your Audi dealer.

Mar 02, 2009 | 1999 Audi A6

1 Answer

I BROUGHT A AUDI 2000 A6 4.2 SAFE RADIO


Turn on radio - the word SAFE will appear in the display. Press th P.SCAN and RBDS buttons simultaneously and hold them down until "1000" lights up in the display.Release buttons.Do not, under no circumtances, continue holding them down or press them once again. This will cause the radio to consider the number 1000 to be the input code.Use station buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use the button 1 to enter the first number 2 for the second number 3 for the third number and 4 for the last number.Once you have entered the code and it shows on the display,press the P.SCAN and RBDS buttons down again simultaneously and hold them down until the word SAFE appears in the display.Release buttons. Soon afterwards a frequency will be displayed.

Nov 22, 2008 | 2000 Audi A6

Not finding what you are looking for?
2001 Audi A6 Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13152 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...