Question about 2002 Dodge Neon

2 Answers

Headliner Removal 2002 Dodge Dakota Quad

How do I remove the headliner for repair?  None of my manuals gives a detailed procedure.  I was able to remove the map light overhead console, but can't figure out how to remove the two visor clips to proceed with removal.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The visor clip is made in 2 parts. the outer cover needs to slide straight down which releases tension of the inner clip which is wedged in by the outer cover.

Posted on Jan 23, 2010

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 35 Answers

There is a cover hiding the screws they are star bit.

Posted on Feb 10, 2009

  • Brandon Dennis
    Brandon Dennis Feb 28, 2014

    It's NOT a DODGE!! It's 2002 FORD F350 SUPERDUTY

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removing headliner


James, Check the attached links,instruction and guides on head liner removal. You can also google search your vehicle.Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Automotive Headliner Removal
Replacing your car headliner in 5 easy steps
How to Install Headliner
Installation Bow type Headliner Part 1 Removal and Preparation

Jul 03, 2016 | Cars & Trucks

1 Answer

How do I remove headliner 1998 expedition


At the corners of the headliner you will see some trim moldings. They have to be remove make sure that if you see screws on the moldings that they get remove before prying them off. The trim moldings come off by prying them loosed. Pull on them, they should pot right off be careful not to break them. In the center of the headliner you will see some over head consoles they have to be removed to, check for hidden screws before trying to pull them off. Also disconnect the plugs on the overhead consoles.

1998 Ford Expedition XLT Headliner

2002 Ford Expedition How To Remove Headliner Free Auto Service and Repair...

and a GENERAL VIDEO on how to remove a Headliner.

Jul 08, 2015 | Cars & Trucks

1 Answer

How to remove the headliner


This YouTube site will give you all you need to replace headliner
Video for How to do I remove the headliner on a 2006 Chevy Silverado Sep 27, 2010 - Uploaded by ClassicManuals.net
Replace your disintegrating GM headliner and Visors for less than ... With that being a GM ...

Nov 29, 2014 | 2006 Chevrolet Silverado

1 Answer

Sunroof in 2002 Chevy Impala won't close, is there


Sorry, no. Pull down on the headliner at the front of the window and you can see the motor. Cable is most likely broke or motor bad. Remove all the columns front, middle, and back. Remove the headliner. Then you can access the motor and regulator for the sunroof. The columns and headliner just pop off.

Oct 19, 2014 | 2002 Chevrolet Impala

1 Answer

2005 Jaguar S-Type sunroof headliner needs repair


In order to repair the headliner cover for the sunroof/moonroof panel, you must remove the panel to recover it or have someone recover it. The jag expert Richard at justanswer gave detailed instructions with manual pages on how to do this without removing the entire headliner:

First the glass will need to be removed then that rear trough needs to be removed then the sliding panel can be removed. Click on the links.

Glass
Trough
Panel

It's only 6 screws and the panel will slide out (with a little flexing) through the sunroof opening. This will prevent removing the entire headliner.

http://www.justanswer.com/jaguar/7r5k7-jaguar-s-type-headliner-2005-s-type-jag.html

Apr 13, 2013 | 2005 Jaguar S-Type

2 Answers

How to remove the headliner and install it


Hello,

When Your head liner starts to sag or You have another nice headliner You want to use in replacing Your old liner, it is actually a good thing. Removing and installing a new one is also a easy task and does not require any form of technicality to do this. Please get these instruments(Replacement headliner fabric, Spray glue adhesive, Screwdriver, Sandpaper, Scissors) and follow the steps below:
  1. Remove everything that bolts into the headliner like visors, lights and coat hooks. These things are normally bolted to the ceiling through the headliner, making it impossible to remove the headliner with these things in place.
  2. Take down the old headliner. You can grab it through the dome light hole or one of the other holes now showing. Be careful not to rip or bend the headliner. Slowly move it towards the rear of the car. You may have to remove some of the molding along the sides of the headliner.
  3. Carefully take the headliner out through a door of the car. You may have to maneuver the headliner around the seats and steering wheel to get it out of a door. Be careful not to bend the headliner.
  4. Peel the fabric off of the shell of the headliner. It should easily come off by pulling it with your hands. Use some sandpaper to remove any foam that remains on the headliner shell.
  5. Lay the new fabric on the headliner in the correct position. Fold half of it back so the shell is visible.
  6. Spray the adhesive glue on the visible side of the shell and on the underside of the fabric. Allow it to set until it has dried some.
  7. Fold the fabric over slowly onto the shell. Smooth out any wrinkles as you go. Work your way to the outer corners of the shell.
  8. Repeat the gluing procedure for the other half of the shell and fabric. Make sure to smooth out any wrinkles so the fabric doesn't completely dry this way.
  9. Trim the left over fabric to 1/4 of an inch long. This will be hidden behind the molding of the car.
  10. Install the headliner using the opposite steps you took to remove it. Slide it back into place, replace the molding and then the visors, lights and coat hooks
Hope this helped. Thank You for using FixYa!!!

Jan 14, 2011 | Nissan Maxima Cars & Trucks

1 Answer

Remove headliner


  1. Remove sun visors and visor hooks
  2. Remove overhead assist handle.
  3. Remove coat hook.
  4. Remove overhead console, if equipped..
  5. Remove A-pillar moldings.
  6. Remove quarter trim panels.
  7. Remove dome lamp.
  8. Separate headliner from roof panel.
  9. Extract headliner through door opening

Oct 10, 2010 | 1996 Dodge Ram

1 Answer

Headliner removal


i would like to see a video of how to remove the trim and roof headliner on a 1990 cadalliac sedan deville

Apr 01, 2010 | 2009 Scion tC

1 Answer

2002 Neon sunroof problem


Yea you got a problem. You need to remove the headliner & get in there. The cable or worm drive is bad & it's alot of work to replace it.

Jun 27, 2009 | 2005 Dodge Neon

1 Answer

Headliner removal


this is not an easy repair w/o damaging the headliner. There is nothing up there except maybe a roof brace. Check the luggae rack again by trying to move all the peices. One must be loose.
there are 27 steps!
If equipped, remove the overhead console.
  1. Remove the screw and disconnect the electrical connectors
  2. If equipped, remove the electronic compass sensor.
  3. If equipped, disconnect the auto dimming interior mirror connector.
  4. Remove the interior/map reading lamp. For additional information, refer to Section 417-02 .
    • Upon installation, make sure the notch in the headliner aligns with the tab on the interior/map reading lamp bracket.
  5. Disconnect the roof opening panel electrical connector and the wire connector pin-type retainer.
  6. Remove the gimp around the roof opening panel.
    1. Remove the sun visors. For additional information, refer to Sun Visor in this section.
    1. Position aside the door opening weatherstrips
  7. NOTE: Installing the LH side sun visor clip will support front of headliner while working on headliner.
    Install the LH side sun visor retainer clip.
    • Loosely install the screw.
  • Disconnect the electrical connector and the wiring pin-type retainers on the A-pillar.
    1. Release the upper B-pillar trim panel clips and position aside the upper B-pillar trim panel.
    Release the C-pillar trim panel clips and position aside the C-pillar trim panel
    1. Remove the rear upper headliner trim panel.
    2. Remove the D-pillar trim panel.
    Vehicles with rear climate control
    1. Remove the rear auxiliary A/C controls.
      • Disconnect the electrical connectors
    2. Position aside the LH rear quarter trim panel.
    3. Disconnect the electrical connectors.
    4. Remove the pin-type retainers and the upper air duct.
      • Push down on the air duct, tilt the top outward and pull upward to remove the air duct
    5. Remove the lower air duct.
    6. Disconnect the electrical connector located at the C-pillar.
      • Release the wiring harness pin-type retainers.
    7. : To prevent damage to the coat hanger retainer, use a 3/16-inch flat-blade screwdriver for this step. Remove the third row coat hooks.
      • Open the access cover.
      • Insert a screwdriver into the coat hook slot and turn the screwdriver 90 degrees so that it engages in the plastic component slot. This will spread the steal attachment clip wings to allow the plastic component to disengage. The steal clip will stay engaged in the sheet metal.
    8. Remove the rear headliner pin-type retainer.
    9. NOTE: An assistance is required to help support the center of the headliner for the remaining steps.
      1. s2n~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: To prevent damage to the coat hanger retainer, use a 3/16-inch flat-blade screwdriver for this step.
        Remove the second row coat hooks.
        • Open the access cover.
        • Insert a screwdriver into the coat hook slot and turn the screwdriver 90 degrees so that it engages in the plastic component slot. This will spread the steal attachment clip wings to allow the plastic component to disengage. The steal clip will stay engaged in the sheet metal.
      2. Remove the LH side sun visor retainer clip.
        • Open the access cover and remove the screw.
      3. NOTE: Rear seats must be folded down and front seats reclined back for this step.
        Tilt the RH side of the headliner upward and remove the headliner from the rear of the vehicle.
    good luck

    Dec 14, 2008 | 2002 Ford Explorer

    Not finding what you are looking for?
    2002 Dodge Neon Logo

    3,139 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Dodge Experts

    yadayada
    yadayada

    Level 3 Expert

    60769 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21949 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6811 Answers

    Are you a Dodge Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...