Question about 1994 Oldsmobile Cutlass Ciera

1 Answer

Bad engine dead miss in 1994 oldsmobile cutlass ciera

Replaced coil packs, wires, etc and still has same problem. plenty of power but still has a bad miss in engine. what can i do to fix it? Please help! thanks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 386 Answers

1. You need to verify that the spark plug wires are indeed going to their proper cylinders and not crossed.

2. You need to check all the cylinders for the ability to achieve full compression. I had a vehicle that had a Engine Miss code on the OBDII computer and couldn't find any reason for it until we checked the compressions and found 1 cylinder had none which was causing the code to appear.

Good Luck
Rich Lilja

Posted on Dec 02, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Missing no power


Having the Yr make and model and engine size will really help out on the car that you have. but you could have a bad ECM and bad Coil packs or you might have just 1 bad coil pack on the vehicle. the coil packs and the ECM get looked over by a lot of people.

Apr 26, 2016 | Cars & Trucks

1 Answer

Upon acceleration misses and pops


BAD IGNITION TIMING INSPECT UR IGNITION SYSTEM PLUGS WIRES DISTRIBUTOR OR COIL PACK

Sep 13, 2012 | 1994 Oldsmobile Cutlass Ciera

2 Answers

Need help in replacing spark plugs on a 1995 olds cutless ciera the wiring order with diagram


1995 Oldsmobile Cutlass Ciera 3.1 liter V-6 VIN "M"

zjlimited_352.gif


1995 Oldsmobile Cutlass Ciera 2.2 liter L4 VIN "4"

zjlimited_353.gif


Hope this helps (remember to rate and comment this answer).

May 09, 2011 | Oldsmobile Cutlass Ciera Cars & Trucks

1 Answer

1994 cutlass ciera service engine light &


Make sure your cables at the battery are clean of corrosion. If everything is good here i would take the alternator out and have it tested.

Apr 11, 2011 | 1994 Oldsmobile Cutlass Ciera

1 Answer

Engine miss at idle. cylinder 1 and 3 has no fire


Try the ignition module.This is more than likely your problem.It is on the coil pack where the wires connect to.I have had a few of these go on me.This should take care of your problem.Hope this helps.Good luck.

Mar 24, 2010 | 2004 Chevrolet Cavalier

2 Answers

Missfire # 5 cyl before and after plugs and wires ?I changed some vacume hoses still same what to ck nexed


i had that happen plenty of times. be sure that the new plug isnt bad and ohm test or see if you haave spark on the new wire. good luck

Jan 07, 2010 | 2001 Ford Explorer Sport

2 Answers

Missfire already changed lugs and wires


sounds like a bad coil pack or bottom plate to coil pack

Nov 28, 2009 | 1994 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
1994 Oldsmobile Cutlass Ciera Logo

Related Topics:

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

77186 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8737 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...