Question about 1994 Nissan Pickup

2 Answers

1995 nissan truck 2wd, 4 cyl, 5 speed manual: You can move through all the gears when the engine is not running, but when the engine is running you can not get it to go into gear. It seems the clutch is not disengaging, because if you don't crank it in neutral it starts to move. I have removed and bypassed the clutch damper and removed and replaced the clutch master and slave cylinders .

Posted by on

  • Anonymous Dec 08, 2008

    I have the same problem. I didn't replace anything, never heard any noises, clutch will not disengage. I did bleed the system and have fresh fluid in place.

  • albert felizardo
    albert felizardo May 11, 2010

    Have you tried bleeding the system?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 86 Answers

Bleed the system

Posted on Dec 29, 2008

  • shotgunkidz Jan 29, 2014

    I have bled it. I am putting a slave cylinder on it this spring. thanks I will re bleed them though to make sure all air is out!!! I really appreciate the advice!!!

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

The clutch disk has broker, a piece of the friction disk material has boken loose and is wedged between the friction disk and the preasur plate. I had this happen to my '77 280Z. You will need to replace the friction disk.

Posted on Dec 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the fluid capacity of the gear oil in a 1997 nissan 5 speed 2 wd truck


CAPACITIES
Engine, 2WDwithout filter..........3.5 quarts[1]
Engine, 4WDwithout filter..........4.0 quarts[1]
Cooling System, Initial Fill..........8.5 quarts
AMSOIL Antifreeze and Engine Coolant
Automatic Transmission, Total Fill..........7.4 quarts
Manual Transmission, 2WD..........4.2 pints
Manual Transmission, 4WD..........8.4 pints
Differential, 2WD Rear..........3.2 pints
Differential, 4WD Rear..........2.7 pints
Differential, Front..........2.7 pints
Transfer Case,..........4.6 pints

1. Add extra oil when replacing filter.
refill check oil level.

TORQUES
Oil Drain Plug.....22-29 ft-lbs
Transfer case
Fill Plug.....18-25 ft-lbs
Drain Plug.....18-25 ft-lbs
Manual Transmission
Fill Plug.....18-25 ft-lbs
Drain Plug.....18-25 ft-lbs

Oct 17, 2010 | 1997 Nissan Pickup

1 Answer

When driving in 5th gear should the RPMs run at 3000 RMPS. Mine is a 4 cly 5 speed


You don't provide much information to go on (type of vehicle, type of engine, 2wd or 4wd, etc.) RPM is always going to be based on the speed you're traveling with a standard transmission. My 4 cyl 5 speed Nissan pickup in 5th gear runs at 3000 RPM at about 75mph.

May 18, 2010 | Cars & Trucks

1 Answer

Fluid capacities and fluid specs


2000 TOYOTA TACOMA 2.7L 4-cyl Engine Code 3RZ-FE

Engine Oil Grade 1......API* All TEMPS......5W-30 Optional ..10W-30
Engine, 2WD, with filter..........5.5 liters
Engine, 4WD, with filter..........5.4 liters

Manual Transmission,......GL-5/ GL-4 All TEMPS......75W-90
Automatic Transmission,A340E......AF3 / A43D......AF3

Differential, Front/ Rear W/ ADRD......GL-5 ALL TEMPS......75W-90
Differential, Front Less ADRD......GL-5 ALL TEMPS......80W-90

Transfer Case,......GL-4/GL-5 ALL TEMPS......75W-90 Gear oil.

Capacity:
Cooling System, Initial Fill..........8.5 liters
Automatic Transmission, A340E Initial Fill..........1.6 liters
Automatic Transmission, A340F Initial Fill..........2 liters
Automatic Transmission, A43D Initial Fill..........2.4 liters
Automatic Transmission, Total Fill
4 speed A340E..........7.2 liters
4 speed A340F..........10.1 liters
4 speed A43D..........6.5 liters
Manual Transmission, ..........2.5 liters
Differential, With ADRD Front..........1.2 liters
Differential, Without ADRD Front..........1.1 liters
Differential, 2WD V6 Rear..........2.6 liters
Differential, 4WD Extra Long Rear..........2.5 liters
Differential, Short WB With LSD Rear..........2.7 liters
Differential, Short WB Without LS Rear..........2.6 liters
Transfer Case, Electronic..........1.2 liters
Transfer Case, STD..........1 liters


Feb 09, 2010 | 2000 Toyota Tacoma PreRunner

1 Answer

Oil spec


1995 HONDA ACCORD 2.7L 6-cyl Engine Code C27A4 C27A1

Engine Oil Grade 1......API All TEMPS......5W-30
Manual Transmission,......SJ All TEMPS......10W-30, optional 10W-40
Automatic Transmission,MPZA......AF2

CAPACITIES:
Engine, with filter..........4.4 liters
Automatic Transmission, MPZA Initial Fill..........2.7 liters
Automatic Transmission, Total Fill
4 speed MPZA..........6 liters
Manual Transmission, ..........1.9 liters

1995 HONDA ACCORD 2.2L 4-cyl Engine Code F22B1 VTEC

Engine Oil Grade 1......API All TEMPS......5W-30
Manual Transmission,......SJ All TEMPS......10W-30, optional 10W-40
Automatic Transmission,A0YA......AF2

CAPACITIES:
Engine, with filter..........4.3 liters
Automatic Transmission, A0YA Initial Fill..........2.4 liters
Automatic Transmission, MP0A Initial Fill..........2.4 liters
Automatic Transmission, Total Fill
4 speed A0YA..........6 liters
4 speed MP0A..........6 liters
Manual Transmission, ..........1.9 liters

Jan 07, 2010 | 1995 Honda Accord

1 Answer

Just bought 95 chevy pu 5 speed manual looks like


Please ensure that this has gear oil because some of these actually ran regular dexron tranny fluid. If it is gear oil a standard 80w-90 is a good all grade gear oil to run in it.

Sep 20, 2009 | 1995 Chevrolet K1500

1 Answer

1995 Nissan XE Pickup Transmission Problems-PLEASE HELP


your luck as with mine is not good. thought I had a bad bearing, after droping the tranny and seperating the housing, I have a broken counter shaft. after looking for another with no luck, the tranny shop informed me that was common for these transmissions. parts are expensive, to rebuild would cost aprox.$800.00 or more. the main cause is the front bearing is supported in alum. causing shaft to move which first takes out the bearing, then the strain snaps the shaft. taking out all gears except 4th and only moves while in 4 wheel drive.

Apr 13, 2009 | Nissan Pickup Cars & Trucks

1 Answer

MY 1997 NISSAN XE 2.4 LITER, 4 CYLINDER, 5-SPEED STANDARD 2WD TRUCK WILL NOT GO IN REVERSE WITH VEHICLE BEING STILL WITHOUT KNOCKING IT IN GREAR WITH YOUR FIST BUT IT WILL GO IN GEAR IF YOU ARE COASTING...


With the vehicle sitting still, ease the clutch out just a little bit while trying to engage reverse. If it pops in, even with a little grinding, it seems the bearings on the counter shaft may be a little stiff. Have you checked the level of the gear lube in the transmission?

Jul 28, 2008 | 1995 Nissan Pickup

Not finding what you are looking for?
1994 Nissan Pickup Logo

673 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...