- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I believe the radio in the Range Rover is wired DIN standard which is used with some minor variations on the majority of European cars across Europe.
I think there are three multiway plugs plus antenna. One plug provides four pairs of speaker wires, one plug carries all the power requirements and the third plug provides a bunch of wires for the steering mounted remote control.
Sorry but I don't have a diagram to hand but you shouldn't have much bother finding one.
if the radio is not working then it's the Radio module located on the rear (tail) on the left. you need to replace that to have your radio back to normal. but before that try to remover the fuse and fix it back as sometimes it gets stuck internally..the fuse located in the glove box. open the led and read which fuse for the radio
I have an 05 hse with the same issue, prought it to an electrical specialist who went in the boot and unkinked the infrared wires from all components, it worked for about a month and a few days ago it started again,when you say you "deoxed" the bluetooth harness....do you mean the nokia brain in the left rear boot or the cell phone dock in the front center console??? I have an appointment with the dealership tommorow and i hope they find the WIRING issue instead of trying to have me buy $5000 in new computers that wont fix the problem,its a common issue in this model with the logic 7 just wish someone who has already cleared this hurdle would post a solution:(...I will keep everyone updated
If the radio is of the newer LCD variety and most of them are of this type the reason would be because behind the display are usually 3 small lamps /light bulbs used to backlight the display and they are probably all burnt out and need to be replaced. This job cannot be done by most people and best repaired by an electronic technician with a soldering tool.