Question about 1988 Toyota Pickup

1 Answer

Trying to remove driver side interior door panel on '88 Toyota PU

I am attempting to remove the interior door panel (driver's side) on a 1988 Toyota Pick Up. The door handle has been unscrewed and removed, the door opener cover has been unscrewed and removed, but I am unable to remove the manual window arm that is used to roll the window up/down. The panel is basically ready to be moved but I can't due to the window arm that is still attached. How do you remove the window arm/knob so I can pop the panel back?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 55 Answers

There is a cotter pin in the window crank, a pair of needle nosed pliers should be able to grab it

Posted on Dec 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1988 Toyota Pickup passenger side water leak interior


it's an 88. You need to look and find where the leak is. Water trails look whitish in color. Door seals, under dash.

Oct 20, 2016 | Toyota Cars & Trucks

1 Answer

Lots of sparking when removing negative battery clamp on 88 toyota pu


I would think that means something is on and using power.

Aug 10, 2013 | 1988 Toyota Pickup

1 Answer

Opening mechanism inside front door not working - How do I get door open?


Parts are available at a salvage yard. Getting the door open is going to be your problem "unless" you pull the seat out and have room to take door panel off to open the door with the mechanism manually.

Sep 11, 2012 | 2000 Toyota Sienna

1 Answer

2001 Toyota Camry - Removing driver interior door panel


you can take a screw driver and pry it off. Be careful if you have power windows, if it falls right off then it could pull the wires loose. The panels have clips that clip to the door. Therefore, the only way to get the panel off is to pry it off.

Mar 07, 2010 | 2001 Toyota Camry

1 Answer

Remove a driver side door panel on a 2000 Toyota Limited 4 Runner


remove the screws that hold the inside door handle and clips behind the door panel

Jun 14, 2009 | 2000 Toyota Corolla

1 Answer

Removing door panel in 2000 toyota corolla


remove phillips scew and the door handle. remove padded arm rest on the door by lifting it up, and remove 2 screws. You can use a panel tool to remove the plastic toggle like pins holding the panel border in. Be as gentle as possible they may break due to becoming brittle.

Apr 01, 2009 | 2000 Toyota Corolla

1 Answer

'88 toyota camry rear window stuck in down position


To get to the Window:

Remove Door Inside Handle:
remove screw, slide the handle forward.
Disconnect the control link and remove the handle.

Remove Door Trim with Inner WeatherStrip:
Remove the two screws from the armrest.
Insert a screwdriver between the trim retainers and the door panel to pry it loose.  Eight hidden fasteners. 1 top left side of door.
1 right side about same height as top of armrest. 1 (each side) about same height as bottom of armrest. 1 on each corner bottom. 1 bottom in middle.  1 on left side between bottom corner and the previous at about lower armrest height...

Remove Service Hole cover.
Remove Door Glass Run.

Remove Division Bar (upper window section divider):
Remove the two screws under the weatherstrip
Remove the bolt.
Pull out the division bar.

Remove the Window Glass:
Place the glass in the door cavity.
Remove the two glass channel mounting bolts.
Remove the window glass by pulling it upwards.

You now have access to the Power Window Regulator; possible replacement of motor etc.

What type of 'things' have you tried for fixing the window and restoring operation?

Jan 22, 2009 | 1988 Toyota Camry

1 Answer

'88 toyota camry rear window stuck in down position


have you tried to remove the doors window switch and ensure that you have a good 12 volts at the switch? I assume when you said you've tried everything that meant you checked the fuses. You can check with a voltmeter but a test light will actually ensure good voltage.

Jan 22, 2009 | 1988 Cadillac Sedan DeVille

Not finding what you are looking for?
Cars & Trucks Logo

392 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...