An expert who has achieved level 2 by getting 100 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
Re: remove insrument cluster
This isn't too hard, but does take a while. Turn the car off &
disconnect the battery. Set some blocks on the wheels. Turn the
ignition on, and move the shift lever all the way to the right (low
gear). Then, remove the screws from all the dash trim and
(carefully!!!) pull it away - there might be some snap locks also, you
don't wanna break those! After that, the panel comes out just by
removing some screws. You disconnect the speedometer cable and the
small string going to the gear indicator (again, be careful!!)
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if your speeking of none of the insrument light illuminating, but headlghts work, then it's the headlight switch that's bad,the headlights will go out very soon though, it basiclly stages down, partial burnout starting with insrument panel. not too hard to change though. abt 50 bucks for the switch give or tk a few
Which light is out? Is it an instrument cluster light, or one on the temperature or A/C cluster? It it's an instrument cluster light, here is the process: (I'm assuming the 99 is similar to the 98) Remove the bottom dash panel under the steering wheel, remove the instrument cluster cover around the steering column. This will reveal the screws that hold your instrument cluster cover in place. Remove this cover and you can then see and remove the 4 screws holding your instrument cluster in place. Pull your instrument cluster out, remove the main wire connector, then you have access to all the instrument cluster lights on the back side. Hopefully you remember which one is out!
generally there is a fuse for the instrument cluster. also make sure the dimmer is in the right spot so you have dash lights. if that doesnt work, have the computer checked with a scan tool to see if its popping a code.
i have a 1999 ford windstar with 3.0 engine it keeps damaging the instrument cluster( nothing works) it all started when i changed the headlight bulbs to a brighter one , it keeps popping the fuse so i then when to a higher rated fuse, this is when it then burnt the instrument cluster(smoke came out from under the cluster