Question about 1993 Ford Probe

2 Answers

1993 ford probe bucking

My 1993 ford probe with the 2.5L V6 is bucking. When it starts to get warmed up it starts. when this happens the car sometimes shots off for a second. it has been doing this for about 2 months but it only happened randomly. now it is doing it a lot more often. any advice would be greatly apriciated.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Bucking, like losing idle and running kinda ruff? That sounds like it could not be sparking right. Maybe it needs a new distributor or coil pack. Run it by Autozone, or Orieley's and have them check that for ya, they might be able to help.

Posted on Dec 23, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 54 Answers

Is it just ONE knocking noise, or is it multiple? If its one, you have a bad Cylinder Head. You need to change it quickly before it destroys your engine. Its a part that is simple to change. When you take the part out, you need to make sure that there aint no parts inside of the engine.

Posted on Dec 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 toyota camry v6 bucking in gear


you may have a broken motor mount-start the car,hold on the brake peddle and have another person watch the motor-shift it into drive then into reverse- do this several times and see if the motor moves around alot-i e twisting -Denny

Dec 12, 2013 | 1993 Toyota Camry V6

1 Answer

1993 toyota camry v6 car bucking in gear


Shawn, I would start by using a good injector cleaner thru the fuel system. Does it run smooth at all, like when cruising? You need to use the good stuff, the $1.00 a bottle junk won't help but it does sound as though you have a fuel issue, could be a bad injector itself on a car of that age.

Dec 12, 2013 | 1993 Toyota Camry V6

1 Answer

Is there a fuel filter on/in a 93 probe if so where


Yes there is one and I think it is under the hood on the firewall.

Jun 17, 2012 | 1993 Ford Probe

1 Answer

1993 ford probe 2.5 l v6 engine overheating


I would try the thermostat first before anything else.Is the oil and radiator fluid normal?

Jul 23, 2010 | 1993 Ford Probe

1 Answer

Car not firing 93 ford probe 24 vlv v6 2.5


more then likeley a bad distributor

Nov 23, 2009 | 1993 Ford Probe

2 Answers

Dies after starting


Sound like the faulty diode on the Distributor which is a common problem on the '93 up to '94 and half V6 Probes. Never was recalled but should have been. Pop in a new Distributor from a mazda or ford and you're golden if that is the problem. My t distributor was a mazda but made by mitsubishi. Go figure, both are excellent Japanese car companies.

Jun 02, 2009 | 1993 Ford Probe

1 Answer

Firing order


for the 1993 probe i could only find a 2.5 V6. there are two banks of cylinders, odd and even. in other words as you stand in front of the vehicle the odd bank is toward the firewall, the even bank is closest to you.
the number one cylinder is on the passenger side toward the firewall and firing order is 1-2-3-4-5-6. hope that helps

Jun 02, 2009 | 1993 Ford Probe

1 Answer

Could it be my fuel pump?


A fuel pump is not the problem, they either work or not, u are most likely having a loose of ignition spark, possible ignition module.

May 27, 2009 | 1993 Ford Probe

1 Answer

1993 Ford Probe needs motor mounts


is the model with the V6 mazda motor, if so it can be a bit difficult if you have little mechanical experience, but it is doable without removing the motor or transmission. we would allow 3 hours to complete the whole job.

Dec 23, 2008 | 1993 Ford Probe

Not finding what you are looking for?
1993 Ford Probe Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...