The Autozone picture must be from an older Dakota 3.9L. My Dakota 3.9L belt routing is as shown. To remove the belt put a wrench on the tensioner pulley fastener (fastener in center of pulley) and rotate it clockwise. This will pivot the tensioner loosening the belt, Remove the old belt and install new one per the routing. Check to make sure the belt is sitting properly in all pulleys
SOURCE: i need a serpentine belt diagram for a 1993 dodge
Fig. Accessory serpentine belt routing-3.9L, 5.2L and 5.9L LDC gasoline engines IMAGE LINK
Hope helps (remember to rating this free amswer)/
1,712 views
Usually answered in minutes!
i have same thing need a diagram of serpentine belt auto zone no help i have a 1994 dodge dakota
have a belt diagram problem.
how do i change the belt
×