Question about 1998 Pontiac Trans

1 Answer

1998 pontiac transport montana power steering return hose

I have a severe tear in the return hose for the power steering and need to replace it. I need to find a diagram to try to fix it myself.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 651 Answers

If it's the return hose, you can just cut out the bad part and replace it with rubber hose and clamps.

Posted on Dec 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wat size socket do I use to remove power steering pump on 2000 Pontiac Montana


Do you have the pump drive pulley off yet?
Remove the drive belt, remove the 3 mounting bolts (15mm) by using a socket ththrough the holes in the drive pulley. Remove the upper intake manifold to give elbow room, slide off the rubber return hose, remove the pressure line and lift out the pump. Just reverse the process to instill the new pump. And fill with the proper fluid.

Sep 27, 2016 | 2000 Pontiac Montana

1 Answer

How to Replace power steering hose on 2003 Pontiac montana


Very simple. Put the car on ramps. Remove the the fittings on both ends along with any clamps and remove the hose. Caution, these fittings can be very tight. You may need a flare nut wrench or self tightening wrench to get them loose. Be very careful not to cross thread fittings when installing. The hoses go from the pump to the rack and pinion unit under the car.

Mar 15, 2015 | 2003 Pontiac Montana

1 Answer

I got my power steering hose replaced and the 2008 pontiac montana is whining like it was when there was no fluid in it what do I need to do to bleed the line?


I think you damaged the steering pump by driving it without steering fliud in it. It should purge all the air out of the system after turning the wheels full left then full right a few times....check the fluid again then repeat...if fluid is not foamy after trying this then pump needs rebuild or replace....expensive....go to salvage yard and get a used pump....good luck

Mar 12, 2015 | Pontiac Montana Cars & Trucks

1 Answer

High pressure hose on power steering pump 99 montana leaking


Leaking high pressure hoses mean iminent failure get it replace as sonn as you can

Jan 27, 2013 | 1999 Pontiac Montana

1 Answer

Power steering pump replacement 2002 pontiac montana


Remove the drive belt, remove the 3 mounting bolts by using a socket ththrough the holes in the drive pulley. Remove the upper intake to give you room, slide off the rubber return hose, remove the pressure line and lift out the pump. Just reverse the process to instill the new pump. And fill with the proper fluid.

Jan 09, 2013 | 2002 Pontiac Montana

1 Answer

Replace power steering pump


Remove the belt, there are 3 bolts that you have to remove through the openings in the pulley. Remove the power steering lines from the hold down bracket on the left lower side of the engine then remove the return rubber hose from the steel line by removing the front right tire and splash shield. Then you can lift the pump up and out and have room to remove the pressure line.

Jan 29, 2011 | 2000 Pontiac Montana

2 Answers

Where is the power steering hose? on a 2001 pontiac montana


The power steering hose,goes down under the power steering pump,it goes directly down from the pump,and cuts under the engine to the rack and pinion,both hoses do.If this was helpful,please rate,thank you.

Jul 11, 2010 | 2001 Pontiac Montana

1 Answer

How to replace rear wiper blade in pontiac transport montana 1998


When you purchase a wiper blade, the step-by-step instructions are included in the package. It will be a matter of carefully pulling up and out, then reverse the steps to install.

Jan 20, 2009 | 2006 Pontiac Montana SV6

Not finding what you are looking for?
Cars & Trucks Logo

700 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...