Question about 2004 Ford F150

1 Answer

I cannot get my map lights in my 2004 f-150 xlt super cab replaced haw can i replace them ?

Posted by on

  • yadayada
    yadayada May 11, 2010

    What do u mean u cant get them replaced?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 99 Answers

FROM LustyKid:

You need to take off the overhead console to access the lights. My overhead snaps on and off. Be very carful. Others you need to remove the lenses on the lights, then you remove the screws holding the fixture to access the light bulbs, Reverse the process to install. Don't pry. If it doesn't come off, something is holding it, look for screws in other places. Lenses have areas where you unlatch very carfully so you don't break the lense is made of plastick and craks easily. Too much force, you are in the place, look for the locking tabs somewhere near the center of the outer eadge for the lense.

Sometimes you see like a small round plug. Those you can pry off with jewelers screw drivers and once off you can see the screws.

If they are the ones on the doors the trimming will have to be remove very carfully from the door. Once all the screws are out and the snaps loose, some door panels go up to loosen them from the door, not outward like most. Pull outward you will break the retaining plastic L.. If not sure, ask the dealer dudes they are very helpful sometimes. (For Free)

Posted on Dec 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I changed the entire dome light fixture due to weak tabs that hold the center light.. now the dome lights work,the map lights do not work.there a fuse or something that controls the map lights? ?


Absolutely! There's a fuse that controls every light on your truck. Some share the same circuit, some don't. Consult your manual. If you don't have one, get one - you will need it repeatedly.

Feb 08, 2016 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

99 4.0 super cab ranger 4x4 xlt, 4wd high & low light flashing on console, won't engage .


check the rods are not bent at transfer case try putting it into gear with a shifter from underneath ,if no go must be internal also try backing up if possible.

Aug 26, 2014 | Ford Ranger Cars & Trucks

2 Answers

Abs light comes on in my 2003 f350 xlt super duty. it comes on when accelerating or siting still or just driving. my husband is a mechanic and has tried everything he knows to fix it . Looking for more...


maybe a wheel speed sensor is not working or is off a little that could throw a code. or the reluctor wheel on the brake rotor got damaged somehow. Or maybe in the rear the abs sensor is no good assuming it has 4 wheel abs. What does the trouble code say?

Dec 22, 2010 | 2000 Ford F350 Super Duty Super Cab

1 Answer

How to take off the rear rotor on the brake assembly off a 2001 350 super duty crew cab ford 4x4


give this website a www.rwconnection.com if all fails stop by your local Ford dealership in the parts department and they will print you off pictures and diagrams showing you how to remove them wish you the best Michigan Man.

Nov 13, 2009 | 2007 Ford E-350 Super Duty Length XLT

1 Answer

Need a diagram for both fuse boxes on a 200 f350 xlt


Starting on page 147:

http://www.motorcraftservice.com/pubs/content/~WOYF23/~MUS~LEN/36/00f23og3e.pdf

Aug 09, 2009 | 2000 Ford F350 Super Duty Super Cab

2 Answers

Where & how many oxygen sensors do I need for my 1997 Ford Ranger XLT Super Cab


Look before and after the catalytic converters. They will have wiring connected to them.

Apr 20, 2009 | 1997 Ford Ranger SuperCab

1 Answer

How to replace map & dome light bulbs on a 2008 Ford F-150 Super


2008 Ford F-150 SuperCrew Cab (without moon roof or rails): How to replace the map light bulbs.  First, you'll need a "trim pad remover."  It is a tool with a screwdriver handle and the metal part has a 'smooth' forked tongue (see Snap-on Stock#: A177A for picture).  Go to the center counsel and "gingerly" work around he counsel and pull down at the same time.  The counsil is held in by six snap in tongs.  It should remove pretty easily.  once down, you'll see where the bulbs are.  Unscrew and replace.  Now, just line up the tongs and gently bump or hit the pressure points (where the tongs are) and it should snap into place.  It should take no more than five minutes, tops.

Nov 16, 2008 | 2004 Ford F150

Not finding what you are looking for?
2004 Ford F150 Logo

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61292 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...