Question about 1993 Toyota 4Runner

Open Question

Fuel pump seal 1988 lj70 land cruiser

How do you change it ?how long does it take?

Posted by on

5 Suggested Answers

  • 119 Answers

SOURCE: 1988 toyota hj75 land cruiser

Repelce fuel filter, check is there any fuel leak,
also check heater plugs,
if all that ok check injectors and injection fuel.
check how is engine compresion.

Posted on Oct 07, 2008

Technopro
  • 243 Answers

SOURCE: quantity of engine oil used in 1 HD engine toyota land cruiser

The Landcruiser 1HD engine uses 9.3 liters of oil with the filter. The oil is replaced every 5000Kms.

Posted on Nov 12, 2008

  • 1 Answer

SOURCE: Land Cruiser front wheel

Just check your car does not have differential locks, in theory they should not come on without being switched on but they can fail in the 'on' position. Lift both front wheels and see if the steering is stiff with the engine running, if it is then the 'locker' is not to blame. If it is now free then look at the locker and see if it has seized,

regards

Dave

Posted on Nov 27, 2008

  • 1 Answer

SOURCE: what kind of oil for toyota land cruiser 2008

best u use mobil one synthetic motor oil

Posted on Jan 19, 2009

  • 583 Answers

SOURCE: fuel pump causing engine revs to "hunt"

these were the best engine ever built by Toyoya they always had a tendancy to do this ,make sure all the vacuum lines are connected nand the idle should be set at 800 rpm. you seem to have to give them a bit of revs to over come the problem

Posted on Sep 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1989 Toyota Land Cruiser (BJ70)


Fit a new water pump ,the seal is leaking and stops when it warms up.

Nov 21, 2013 | 1989 Toyota Land Cruiser

1 Answer

1991 land cruiser inline 6 running fine then died while driving. Electrical seems ok, engine cranks but won't start. Fuel pump? Alternator? thanks


check for spark first. if theres spark then crack a fuel line while trying to crank to c if theres fuel getting pumped to the injectors. always start with the basics then go from there.

Jan 23, 2011 | 1991 Toyota Land Cruiser

1 Answer

I have run my ute low on deisel after filling it up it doesnt want to start .


You may have put undue stress on the fuel injection pump or on the supply pump. Check the fuses for each of these first. If they check out, you will need to test fuel pressure both before the fuel filter and at the injectors. If it is an absolute no-start, the injection pump has probably failed. If it is a hard start or stalling problem, it could be the supply pump, or the filter could be clogged w/sediment from the tank. Post results and details to have the problem narrowed further.

Jun 21, 2010 | 1988 Toyota Land Cruiser

1 Answer

1988 Land cruiser front end vibration from wheels


change the swivel bearing each side you got 2bearing do prober adjustment.


good luck

Dec 31, 2008 | 1988 Toyota Land Cruiser

3 Answers

Quantity of engine oil used in 1 HD engine toyota land cruiser


The Landcruiser 1HD engine uses 9.3 liters of oil with the filter. The oil is replaced every 5000Kms.

Nov 12, 2008 | 1994 Toyota Land Cruiser

1 Answer

1988 toyota hj75 land cruiser


Repelce fuel filter, check is there any fuel leak,
also check heater plugs,
if all that ok check injectors and injection fuel.
check how is engine compresion.

Sep 20, 2008 | 1985 Toyota Land Cruiser

Not finding what you are looking for?
1993 Toyota 4Runner Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

66902 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...