Question about 1988 Audi 5000 CS

2 Answers

Workshop Specs for Audi 500 2.2L Turbo.

Can you please help with the torque / timing etc. settings for this motor?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 2 Answers

Hi Bob it's Donny again,i tried to divert the flexible horse from the inlet the one that goes to cooler Rad,by adding a C curved one straight to the steel pipe that goes to the airflow meter bt the engine still won't start,it looks like no enough air is sent to the airflow meter to lift the butterfly coz I can't feel the vibration of butterfly when engine is cranked. Now I realized that someone had tempered with fuel distributor which led to spray gas into the cylinders n ultimately went down to the pan because I found out that the oil was over +- 4 liters over wich I drained thinking they they have put more oil by mistake bt to realize it was light oil,can this oil cause the engine not to start?

Posted on Mar 14, 2017

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 7 Answers

Hi, I have workshop manuals for this range of car. Let me know the settings you need and I'll get back to you with them. Cheers, Bob.

Posted on Dec 27, 2008

  • 1 more comment 
  • marius moller Nov 30, 2012

    hi bob i also got a 1992 audi 500 turbo can you please help me with the firing order

  • Bob Kerr
    Bob Kerr Dec 01, 2012

    Hi Marius,
    The firing order is 1,2,4,5,3. I have a feeling this is stamped on the side of the block.Good luck, all the best, Bob.

  • marius moller Mar 05, 2014

    Hi it is marius again how are you.Would it be posable to mail me the wireing diagram of the audi 500 turbo thanks


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to set timing chain on the chamcs of Audi 1,8 non turbo

It would be wise to buy a cheap shop manual for complete instructions, including torque settings you will need.

Aug 16, 2016 | Audi Cars & Trucks

1 Answer

KB 250 diesel engine. What are the torque specs for mains, big end bearings, and the head?

welcome to usa forum.
no year, no country stated, (hopeless for sure)
we dont have KB's here, sorry!
so why not be the first and post country.?
as engine spec. vary by that.
Africa, not same as Australia. (etc)
no year, stated.
nor if engine is turbo or not.!
engine spec.s vary by lots of things, including compression ratio.
etc. and evolve in time.

Feb 02, 2016 | Isuzu Cars & Trucks

1 Answer


go google and type in--- torque specifications for ( make not supplied) 1500 diesel engine --
there will be pages that you can download all the specs

Jan 16, 2016 | Cars & Trucks

1 Answer

Need camshaft torque specs ?

Are you doing all this work without a shop manual? It should have the info you seek.

Jul 16, 2015 | 1998 Acura Integra

1 Answer

Torque settings cylinder head audi q7 2009 3 litre turbo diesel

Doesn't use foot/lbs for torque. Audi uses the degree of angle torque. 5 step tightening process in which the last 2 steps use additional 90 degree angle.

Nov 05, 2014 | Cars & Trucks

1 Answer

Removing cylinder heads on a 1.8L turbo engine is done how

get a good workshop manual as will give you step by step instructions , as if the head bolts are not undone in a specific order then you risk damaging the head itself , and will give the torque settings etc

Nov 04, 2014 | Cars & Trucks

3 Answers

I need to kno the cylender head torque specs for a 2.3i vw microbus five cylender

The Audi 5 cylinder engine (Engine code AFU) was mainly produced in South Africa and was called a Microbus. The engine capacity was 2309cc. The Microbus 2.3i T3 was produced from 1992-2002.

According to Mead & McGrouther - Data Digest the torque settings for the cylinder head bolts are as follows: 40Nm + 60Nm + 90'degree turn + 90' degree turn. The cylinder head bolts has to be replaced with brand new ones.

The Main Bearings: 65Nm. The Big Ends: 30Nm + 90 degree turn.

The OHC Bearing Caps: 20Nm.

Flywheel Bolts Manual transmission: 60Nm + 90 degree turn.

Jul 28, 2014 | Cars & Trucks

1 Answer

Vauxhall vxr exhaust manifold torque settings

german specs man gernan specs, u took the old one off so you know how tight they were gooden tite lol

Nov 25, 2013 | Cars & Trucks

2 Answers

How do you set the timing on a 420a 2.0 eclipse motor??

if you go to you will gain access to the free manuals online for your vehicle. here you can get step by step instructions and cautions, in addition to torque specs for the head gasket. you will need to register and provide info about your car, it is FREE!!! Good Luck!

Sep 15, 2009 | 1996 Mitsubishi Eclipse

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers


Level 3 Expert

74311 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14008 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides