Question about 2000 Hyundai Accent

3 Answers

Hyundai 2001 my daughters car wont start it turns over but wont start chked gas pump works fine its like theres no gas getting to engine

Posted by on

  • kziga777 Dec 20, 2008

    I have a 05 sonata changed timing belt and crank sensor. Still not firing or getting fuel, and fuel pump is good.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I HAD THIS PROBLEM WITH MY ACCENT 2000 TURNS OVER FINE BUT WONT FIRE TURNED THE LIGHTS ON AND WILL START, SOMETHING ELECTRICAL IM ASUMING

Posted on Jun 08, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

You have coils (two) just under the plastic covering over the spark plugs. $99.00 ea. + tax 2 years ago. I think they maybe called ignition coils. Don't hold me to that.
That was what was wrong with mine. I went to a
dealer $850.. with labor and kept my car 2 days.

Posted on Jul 08, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Have you manually pumped the fuel through?

Posted on Dec 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Car stopped running while driving


run the fault codes and check for cam/crank position sensor . check that the cam shaft is turning (broken cam belt)

Jan 17, 2014 | Volkswagen GTI Cars & Trucks

1 Answer

Replaced the fuel pump and filter on a 2001 pontiac grand am se. car wont start is there anything else or filter keeping the gas from going to the engine?


dont know if I can help but make sure the fuel pump comes on for a few seconds when you turn the ignition on if not check the relay under the hood you may need someone to help with this there are 4 terminals when you pull the relay out one will have power all the time with the key on another one will have power for a few seconds when you first turn the ignition on if you have power there and the fuel pump dosent run at all the relay may be bad you can also check the connection by the fuel tank for power when you turn the ignition on also I just put a fuel pump in my sons 2000 grand am and it did not start after I put the pump in but I could hear the pump running but we had only put a couple of gallons of gas in so I put another 3 gallons of gas in and it started I also just put a pump in my daughters 2001 grand am and it started right away but I had put 5 gallons of gas in right away You can also see if there is fuel pressure at the fuel rail on the right side or passenger side of the engine there is a connection to check fuel pressure you can take the cap off and use a screwdriver to push the valvestem in to see if there is fuel there and any pressure. if you have power to the fuel pump and plenty of gas and the pump wont run try hitting the bottom of the fuel tank under the fuel pump with a ribber hammer

Sep 17, 2011 | 2001 Pontiac Grand Am SE

1 Answer

Hello I am recently haveing a problem with my 1999 accent.. It turns over fine but the last few days it'll start in the morning and when i come home for luunch and park it i just wont start... Im thinkin...


Most likely when you found no pressure, the pump isn't working, Was there any gas being pumped out at all? three option here are a bad pump, fuel filter clogged, or your pressure regulator is bad. Disconnect the line right before the filter and have someone turn the engine over to see if gas will pump from here. Then disconnect the other end of the filter and check for gas flow. With the problem getting worse, it just sounds like the pump is on it's way out, which will usually happen this way. Starts a little and gets worse.

May 23, 2010 | 1999 Hyundai Accent

1 Answer

Why wont it start when you push start it has alt belt and has gas no ignition would that stop it from starting not geting gas to engin but all lines are holding gas so how do you bypass the fuel pump to...


When you turn the ignition on, it starts the fuel pump then sends fuel to the injectors. Since there is no ignition to engage the pump, it will 'starve' the vehicle of fuel. You might run a power source directly to your fuel pump but I'm NOT suggesting that because it would be wrong for me to tell you something like that... plus it could be dangerous. Remember, if you just happen to decide to do something like that, the fuel pump will not stop until you disconnect it (or it burns up). Be Careful!. Don't forget to vote if this helped you.

Apr 24, 2010 | 2001 Hyundai Accent

1 Answer

Car wont start


Could be a lot of things but i would start with the fuel pump. I would say 9 out of 10 time i get a car that cranks fine but wont start it turns out to be a fuel pump. Have the fuel pressure checked and go from there.

Jan 28, 2010 | 2001 Ford Focus

1 Answer

Ok i have a 1999 hyundai accent wont start changed fuel pump and it started ran very bad very! turned it off wouldnt start back up again checked spark plugs no spark and no power going to fuel pump we are...


Changing the pump doesn't affect the spark so lets start a that the beginning?? Why was the pump replaced and was it running fine before changing the pump? Also plugs could be fouled as well but if it was working fine before the fuel pump it will be fine afterwards if getting gas and the fuel pump was the problem., Also how did you verify no spark??

Oct 10, 2009 | 1999 Hyundai Accent

1 Answer

Will not start;will crankover


Step 1. Find a OBDII scanner (OBD stands for On-Borard-Diagnostics). Find out what DTC code (or codes) are stored in the ECU (DTC = Diagnostic Trouble Code, and ECU = Engine Control Unit - it's the computer which manages engine operation).
Step 2. After you find out which code is stored in the ECU, go to http://www.hmaservice.com/ and register your veh (by VIN). Afterward, you can navigate the Hyundai Service Site to find out what system is giving you problems, the diagnosis procedure and what may be needed to fix it.
Nuff said... Let me know what you find.

May 30, 2009 | 2001 Hyundai Accent

3 Answers

1.5dci 2004 scenic wont start


hi is there fuel getting to engine?any vapour coming out exhaust?sometimes glow plugs not working can cause this.try a squirt of easy start into air filter.NOT MUCH!!READ INSTRUCTIONS.HIGHLY FLAMMABLE.then start car for about 10secs.get this from car accessorie shops.if it fires on this its highly likely glowplugs not working or fuel pumptiming out.its hard to say without seeing the car

May 18, 2009 | 2004 Renault 181

Not finding what you are looking for?
2000 Hyundai Accent Logo

780 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...