2001 Dodge Dakota Logo

Related Topics:

Posted on Dec 01, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

How install fog ligths

I have a dakota01 and is no fog ligth there so i buy a kit,you know ligths wires but i dont now how put the lihths

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Master 840 Answers
  • Posted on Feb 02, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Jan 24, 2009
Answers
840
Questions
0
Helped
424124
Points
2495

You will have to make cut outs in the bumper and thats it unless you want to bracket the to bottom of the bumper/ Please rate my response thank you very much

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a 1997 chevy Suburban 350 5.7 vortek motor with "check engine" ligth on i put a code reader an say code P1345 ,change the whole distribuitor,crank shaft sensor,spark plugs cables an...

its a cam sensor corilation to so try replaceing that as well but if you want light off disconnect battery for ten seconds but if problem still persist the light will eventually come back on.
1helpful
1answer

I just bought two flood lamps to fit to the bumper of my 95 jeep wrangler, how would i wire them to a toggle switch?

  1. 2-wires on each fog ligth
  2. toggle switch 2-hook up
  3. okay run hot wire from battery to one side of toggle
  4. on fog ligths one wire migth be white or black
  5. take one of the wire on fog ligth (white)&other fog ligth (white)wire
  6. take a wire hook both white wire from both ligths an hook to this wire an run it to the other side of toggle
  7. black wire on ligths hook them to ground
  8. after you hook the ligths up an they work it best to put a fuse connector between one of the wires on toggle
0helpful
1answer

I change the turn signal lever I took apart unplunged everything carefully put everyhing back together carefully but as I was workig on it I heard my horn honk twice I look no bear wires anywhere finish...

your security system is activated. try turning the key on let set for 10 minutes turn it off then start. on some models it has to be done 3 times on off on off on off start. 10 minutes each time
0helpful
1answer

I dont know how to turn on my 2008 passenger airbag

It is automatically on, except when someone very ligth is in the seat, like a baby. Then the "Passenger Air Bag Off" ligth comes on.

You need do nothing.
1helpful
1answer

Brakes ligths dont work

bad brake light switch
0helpful
1answer

No turn ligth and no stops ligt

gmc had a recall for that problem. It is the switch under the break pedel was installed wrong during manufacturing. Took mine in and they replaced switch.
1helpful
2answers

My car( neon 97) didnt have fog lights originaly and i dont know how to instal it

its not a bad job on a neon ,the fog light kit you will buy will come with a switch and the relay and wiring for installing them,they also came with a real good set of directions for doing this,if you need to get someone to help you with doing this,sometimes running the wires is tricky,but other than that the fog lights can be mounted in the same place as the originals was,and they look good,i sold my 97 neon and i had fog lights on it,they were after market but looked and worked excellent,with a little work and time anyone can install a set on any car,good luck.
0helpful
1answer

I dont know the wiring prossing

I would splice this in to an open fused area on your fuse block since all factory fog lights are on a separate circuit. The kit you bought should have a foglight relay with it also with instructions. If not buy the correct kit for your car instead of butchering up with cheap lamps on it
Not finding what you are looking for?

146 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...