Question about 1990 Honda Accord

1 Answer

Where is the adjustment for the clutch in a 1990 honda accord

Posted by on

  • matt1376 Dec 01, 2008

    i really dont know much about cars i am just tryin to learn so i dont have to pay some one else to do some thing i may be able to do. so this was to complex




×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 94 Answers

Hi, The clutch adjustment is on the pushrod at the clutch master cyl. at the pedal cluster. Losen the locknut on clutch master cyl. pushrod and turn pushrod in or out to get specified stroke and height at clutch pedal. The pedal stroke should be  5.6" and the height should be  8.25".

Posted on Dec 01, 2008

5 Suggested Answers

  • 90 Answers

SOURCE: can you adjust the clutch on a Honda Accord LX

These cars use a Hydraulic system for their clutches. chances are if your pedal is low it is time for a new clutch providing your slave cylinder is ok. With this system you will have a master cylinder for the clutch and a slave cylinder which moves the clutch itself when push the pedal. you need to make sure their is no leaks in these two parts.

I hope this helps, Allen

Posted on Oct 03, 2009

fyrebyrd1
  • 121 Answers

SOURCE: 92 honda accord camber adjustment

There is no no camber or caster adjustment on that model. If the car has been in an accident, chances are something is bent. My experience has been that the shock body and/or the steering knuckle is bent. Parts replacement is the only true fix. If the vehicle has had the ride height altered, ie. lowering springs, then there are adjustable upper control arms and ball joints available. These do generally only address the camber angle, not caster, which can also greatly affect handling. hope this helps.

Posted on Oct 21, 2008

  • 17 Answers

SOURCE: 1990 Honda accord horn problem

Horn fuse should be located in the fuse box under the dash on drivers side kick panel. If fuse is good try replacing the horn itself, it might be bad due to the age of the car. They are located behind the front bumper on the left and right side.

Posted on Jan 08, 2009

  • 13 Answers

SOURCE: 1990 Honda Accord Fast Idle Problem

usually idle that goes up and down is cause by a bad "idle control valve" located near the throttle body. Needs to be replace.

Posted on Oct 11, 2009

philschneide
  • 448 Answers

SOURCE: ac compressor clutch relay 1991 honda accord

Difficult to describe, but I will give it a try.
Inside the driver's side fender, close to the front of the car, there is a bracket that is held in place by one bolt, but which has a short horizontal bar as part of it which has two large clips encircling two cylinderical devices which have wires clipped into them at the bottoms. The one closest to the front (radiator) is the compressor clutch relay. The other one is the condenser fan relay.
Hope this helps you find it.

Posted on Oct 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1990 Honda Accord won't start. I just replaced


i have two things that come to mind first of which is your neutral safety switch ...its located on the clutch pedal ..its to prevent the car from being started in gear it may not be working correctly and wont let power to the started when you turn the key...most likely the problem...the other thing if thats not it you may need to check the ignition switch...

Jul 30, 2011 | 1990 Honda Accord

1 Answer

Where are the syncronizers on a 1990 honda accord


All manual transmissions have synchronizes inside for each gear.
That is because the gears are all spinning freely in neutral, and when you want to select a gear, you have to lock it onto the shaft. Since the shaft and gear are not at the same speed, there is a binding mechanism designed to help force them to the same speed, so they can be locked together.
So this is all inside the transmission.
If you have having trouble shifting, check out the clutch adjustment and freeplay first. You don't want more than a half inch freeplay, so that there is maximum disengagement of the clutch when the pedal is pushed to the floor. You might also want to check fluid level with plug in side of transmission.

Dec 21, 2010 | 1990 Honda Accord

1 Answer

Approximatley how much would it cost to instal a new clutch in my 1990 honda accord


no more than 600. if you can get a decent shop that gives you breaks and is honest.

Oct 10, 2010 | 1990 Honda Accord

1 Answer

Is there a way to adjust the clutch on a 1992 honda accord 2 door EX


I am sure it is self adjusting,it is a fluid clutch,no adjustment,the clutch assembly needs replacing.

Jan 25, 2010 | 1992 Honda Accord

1 Answer

How to replace clutch kit for a 1990 honda accord?


Go to your local library and check out one of their service manuals.They are free and you can check them out anytime.As long as you return them.Good luck.

Dec 07, 2009 | 1990 Honda Accord

2 Answers

How do i adjust the clutch on the 1991 honda accord 5 speed


This has a non adjustable hydrallic system unlike the days of old when a cable could be adjusted at the transmision.

Sep 27, 2009 | 1991 Honda Accord

1 Answer

Clutch slipping on 93 Honda Accord


there is no adjustment, replacement needed

Dec 29, 2008 | 1993 Honda Accord

2 Answers

1990 honda accord


sounds like the clutch

Oct 13, 2008 | 1990 Honda Accord

Not finding what you are looking for?
1990 Honda Accord Logo

Related Topics:

513 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...