Question about 1996 Dodge Caravan

2 Answers

What does code p1782 mean

Check engine light on

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 70,387 Answers

The code P1782 MEANS 2-4 pressure switch sense circuit FAILURE. Basically means that the transmission solenoid pack needs to be replaced. Not a hard job

Posted on Nov 30, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 512 Answers

P1782 is a transmission code for the 2-4 pressure switch sense circuit...find a reputable garage to have your transmission checked

Posted on Nov 30, 2008

4 Suggested Answers

emissionwiz
  • 70387 Answers

SOURCE: engine light on code p0732, p1782, p1787 and p0700 twice

P0732 Gear 2 Incorrect ratio
P1782 P/ES Circuit Out Of Self Test Range
P1787 2-1 Downshift Error
P0700 Transmission Control System (MIL Request) Malfunction

Here is the deal, u have some serious transmission related faults, in order to sort this out u will need to take this to the dealer, allot of testing is required to get to the bottom of this, if I had to guess I would say the trans is going to have to be overhauled.

Posted on Mar 19, 2009

Transdoc
  • 829 Answers

SOURCE: my 1999 grand caravan showed

p0700 means there is a code stored in the tcm ( transmission control module). P1782 is 2-4 pressure switch sensor sense. This could be just a bad connection or a bad solenoid pack. Many times itis the beginning of the end.

Posted on Jan 23, 2011

tunde007
  • 2382 Answers

SOURCE: check engine light code p1782

Hi, the code P1782 means that 2-4 pressure switch sense circuit FAILURE. It basically means that the transmission solenoid pack needs to be replaced.

Posted on Jan 24, 2011

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P1782 and multiple code


I would start with the p1782 the clear the codes. If the check engine light pops back on with the codes, then start replacing them.

Nov 11, 2013 | 2001 Chrysler 300M

1 Answer

P1782 and po700 codes. what are they?


P1782 is 2-4 pressure sense circuit and po700 is internal trans controller. take to a shop .

Dec 08, 2012 | 2000 Dodge Grand Caravan

1 Answer

P1782 po700 codes what are they?


2000 caravan with codes p1782 and po700,this is transmission codes, i will tell you this, with out a good scan tool to check the problem correctly you will be just throwing money at it.

this may be due to a bad shift solenoid pack or wiring or internal transmission problems. sorry to say but these transmission are junk.
I would have a transmission shop or dealer check it, maybe the dealer unless you know a good transmission shop that will not try to sell you a rebuilt ******.

Dec 08, 2012 | 2000 Dodge Grand Caravan

2 Answers

Codes P1782, P0755, and P0700


P1782 DODGE - 2/4-OD Pressure Switch Circuitxicon.jpghttp://engine-codes.com/p1782_dodge.htmlForum CodePossible causes- Low transmission fluid level
- Dirty transmission fluid
- Faulty 2/4-OD Pressure Switch
- 2/4-OD Pressure switch poor electrical connection
- 2/4-OD Pressure switch circuit is open or shorted
Symptoms- Engine Light ON (or Service Engine Soon Warning Light)
- Transmission shift shockP1782 DODGE Description The pressure 2/4-OD Pressure Switch is part of the pressure switch of the transmission. The pressure switch are located in the solenoid assembly. The switch provide input information to the Transmission Control Module (TCM). The switch will inform to the TCM is pressure exist in a specified hydraulic circuit. the TCM uses this information to verified that the solenoids are working or not.
P0755 DODGE - 2/4 Solenoid Circuitxicon.jpghttp://engine-codes.com/p0755_dodge.htmlForum CodePossible causes- Low transmission fluid level
- Dirty transmission fluid
- Faulty 2/4 solenoid valve
- 2/4 solenoid valve harness is open or shorted
- 2/4 solenoid valve circuit poor electrical connection
P0700 DODGE - Transaxle Control System Malfunctionxicon.jpghttp://engine-codes.com/p0700_dodge.htmlForum CodePossible causes- Shorted or open circuit within transmission control module (TCM)
- Failure of transaxle control module Tech notes Since the P0700 is just and informative code, check the TCM for more codes to resolve the problem.
Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Driveability problems
- Transaxle shifting problems

Jul 26, 2012 | Plymouth Breeze Cars & Trucks

1 Answer

Diagnostic code P1782


P1782 DODGE - 2/4-OD Pressure Switch Circuit Possible causes of this code are: - Low transmission fluid level (check level hot transmission only)
- Dirty transmission fluid (has transmission been serivced at least every 60,000 miles, fluid and new filter?)
- Faulty 2/4-OD Pressure Switch
- 2/4-OD Pressure switch poor electrical connection
- 2/4-OD Pressure switch circuit is open or shorted
P1782 DODGE Description The pressure 2/4-OD Pressure Switch is part of the pressure switch of the transmission. The pressure switch are located in the solenoid assembly. The switch provide input information to the Transmission Control Module (TCM). The switch will inform to the TCM is pressure exist in a specified hydraulic circuit. the TCM uses this information to verified that the solenoids are working or not.

Oct 20, 2011 | 1999 Dodge Caravan

1 Answer

What is proper fix for fault code p 1782


P1782 - P/ES Circuit Out Of Self Test Range.
Means that 2-4 pressure switch sense circuit failure. It basically means that the transmission solenoid pack needs to be replaced.

The pressure 2/4-OD Pressure Switch is part of the pressure switch of the transmission. The pressure switch are located in the solenoid assembly. The switch provide input information to the Transmission Control Module (TCM). The switch will inform to the TCM is pressure exist in a specified hydraulic circuit. the TCM uses this information to verified that the solenoids are working or not.

Symptoms:
- Engine Light ON (or Service Engine Soon Warning Light)
- Transmission shift shock

Possible Causes:
- Low transmission fluid level
- Dirty transmission fluid
- Faulty 2/4-OD Pressure Switch
- 2/4-OD Pressure switch poor electrical connection
- 2/4-OD Pressure switch circuit is open or shorted


Hope helps.

Apr 20, 2011 | 2001 Chrysler Concorde

1 Answer

Check engine light code p1782


Hi, the code P1782 means that 2-4 pressure switch sense circuit FAILURE. It basically means that the transmission solenoid pack needs to be replaced.

Jan 24, 2011 | 1997 Plymouth Breeze

2 Answers

My 1999 grand caravan showed codes p1782 & p0700,& it is acting fine & th check engine soon light went off on its own. is there a problem?


p0700 means there is a code stored in the tcm ( transmission control module). P1782 is 2-4 pressure switch sensor sense. This could be just a bad connection or a bad solenoid pack. Many times itis the beginning of the end.

Jan 23, 2011 | 1999 Dodge Caravan

1 Answer

Engine light on code p0732, p1782, p1787 and p0700 twice


P0732 Gear 2 Incorrect ratio
P1782 P/ES Circuit Out Of Self Test Range
P1787 2-1 Downshift Error
P0700 Transmission Control System (MIL Request) Malfunction

Here is the deal, u have some serious transmission related faults, in order to sort this out u will need to take this to the dealer, allot of testing is required to get to the bottom of this, if I had to guess I would say the trans is going to have to be overhauled.

Mar 19, 2009 | 2001 Chrysler Concorde

Not finding what you are looking for?
1996 Dodge Caravan Logo

2,905 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...