Question about 2000 Mercury Mountaineer

2 Answers

2000 mercury mountaineer power windows won't work

Power windows won't work from any location. window lock is off. when driver side door is opened, the interior lights blink off and on. Presently ,driver side window is partially down.

Posted by on

  • 2 more comments 
  • markaltomare Dec 01, 2008

    thanks!!! ground wire was broken in rubber weather boot!

  • Anonymous Mar 21, 2014

    drivers side door is open and stuck in the lock or closed position. How can this be rectified?

  • Anonymous Mar 25, 2014

    I cannot open or close the electric windows or lock the door on the drivers side. I checked all known fuses and they are all ok. Where do I go from this point to locate the problem.

  • Anonymous Mar 29, 2014

    try to open my liftgate door and it will not open and i cannot open the liftgate window also don't know if it a fuel or the motor do not know where the fuel is located or cannot open the liftgate to check the motor



2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 512 Answers

Check for a broken wire in the wiring between the body and door

Posted on Nov 30, 2008

  • Martin Markman Dec 31, 2012

    Exactly the problem I found... Thanks!


  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Right On! Found a broken wire in the door driver's door hinge passage.

Posted on Dec 31, 2012


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Driver side door lock not working, how to fix it?

The door latch maybe the problem. That needs to work properly before the lock actuator will function properly.

Jun 01, 2015 | 1999 Mercury Mountaineer

1 Answer

2005 mercury mountaineer where is my power window dues box

dues box ? do you mean fuse box . There are fuses for the power windows in the under hood fuse / relay box ! F1.62 30amp fuse an there is a relay in the CJB - central junction block ,located under the driver side dash panel . Accessory delay relay , first one top left in the fuse box. That's a good place to start ! what if fuse an relay are good ? then what ? do you know how to use a DVOM - digital volt ohm meter ? Do any of your windows work ? The best place to start is the drivers door window switch ! All power to all windows come through that switch .The lite blue with black stripe wire is power wire at the switch !

Mar 15, 2015 | 2005 Mercury Mountaineer

2 Answers

How do I fix my drivers side electric window on 2005 mercury mountaineer? All other windows work

it happen with me also actually the problem is the power window get jammed from the inner part..... you if you able to open it just open now clean it well then spray the lube into it and for a long time it work properly..... thankyou



May 24, 2014 | 2005 Mercury Mountaineer

1 Answer

Power windows mercury mountaineer

wiring harness should be under the left side. covers on the floor area , next to the seats....... in the post area, that your front door locks into , and the hinge area on the rear door..... wiring is wrapped in main harness....

Apr 12, 2014 | 2000 Mercury Mountaineer

1 Answer

99 mercury mountaineer door opens but won't lock on driverside all other doors lock. What can be wrong?

Lock accuator motor about $40 at Oreillys.. Easy to replace after you get the door panel off.

Mar 07, 2014 | Cars & Trucks

2 Answers

My son held the rear passenger window button in the up position at the same time his mother held the driver side front button in the down position and now all 4 windows do not work at all, up or down. FYI...

If forcing the windows using multiple switches at the same time, and then all the power windows have become inoperative, the drivers side, (master), switch is at fault. (Probably burned out). It is the only switch that has the ability to control all switch functions.

Oct 29, 2013 | 2000 Mercury Mountaineer

1 Answer

97 Mercury Mountaineer driver side door won't open. Outside handle flops around; inside handle won't open door

Try a slim jim first, down the side of the window. Or AAA or locksmith. If no luck, remove the seat first. Find the screws and bolts around the door handle and arm rest. Most Ford's have screws around the outer side of the panel. I don't believe your's does. The panel lifts or pops off. Once the panel is off, you can reach down and open the door. Just a note. I have done some to where the panel came out in pieces.

Mar 14, 2012 | 1997 Mercury Mountaineer

1 Answer

Power windows will work on driver side but not passenger side?

motor has probably blown, you'll have to unscrew the inner side of the door to get to this, when you do, it won't be hard to find a working one in a scrapyard.

Aug 06, 2010 | 2000 Mercury Mountaineer

1 Answer

Locked my keys in my 2002 mercury mountaineer

If this has power windows and locks.

Call a lock out service.

You could damage the wiring inside the door.

Aug 30, 2009 | 1995 Chevrolet Corsica

1 Answer

Driver window won't work on 2000 mercury mountaineer

So you wanna take a door apart look at the door look for any liitle plastic caps take them out there may be a screws with cover s aound the sides of the trim or little push ins take them out unscrew them/ take the mirror cover off and thentake the bottom of the panel and pull out ward working your way around to the top/ then opull up and out then take and disconnect the wiring/ proceed to take vaprro barrier off looks like plastic take that off and then you can see the whold outside if you are replacing the motor then you will need to look at where the window should be when you need to take ou the bolts and such/ and thats it then go back ward from here/ Please rate my response Thank you very much

Dec 23, 2008 | 2000 Mercury Mountaineer

Not finding what you are looking for?
2000 Mercury Mountaineer Logo

574 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts


Level 3 Expert

78010 Answers


Level 3 Expert

5651 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides