Question about 1993 Dodge Ram

1 Answer

Fan wables and the belt falls off

I think its the bearings but i dont know how to take the fan off

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 512 Answers

Check the water pump...sounds like the bearing is out of it

Posted on Nov 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace a crankshaft pulley on 2002 Buick rendezvous


a slight wable is common on many of these. I would be more concerned with the belt tensioner and belt. But the crank pully can be done in your driveway. You will need to go to parts store and rent the pulley removal tool that is specific to this engine.

Nov 12, 2013 | Cars & Trucks

1 Answer

Making screeching sound


is it a loose fan belt this will make a scretching noise thats the cheapest thing expensive things if its a manuel could be a thrust bearing on the gear box or worse still an imput shaft bearing on gear box but i think it will be just the fan belt screeching

Nov 03, 2013 | Mercedes-Benz Cars & Trucks

1 Answer

Leaking water behind fan


The water pump is directly behind your fan clutch. Most probably, it's the pump. Shaft seal is already worn out (maybe because of damage bearing). You have to replace the whole assembly or replace the shaft, seal, and bearing. These items are within the repair kit that you can buy in parts store.

Oct 23, 2012 | 1985 Cadillac Seville

1 Answer

Sounds like fan belt noise but, the fan belt looks solid..no cracks etc...doesn't scream on start up..it seams to be a steady sqweak emitting from the fan belt area. Bearing problem?


If your belts are in good shape and tension is proper, you should take off the belts and srin each pulley or tensioner that turns with the belt. I think that you will find that a bearing is going bad. Try to do this when the engine is cold for that will usually make the noise more pronounced.

May 26, 2010 | 2001 Ford Taurus

1 Answer

Fan is wabling on a 1997 jeep, the belt is still on for now, we can't start the jeep up because it hit the schroud.


Now its a couple of things that may be wrong...1 is your waterpump may be bad, and the shaft is wobbling back and forth...2. it could be your fan clutch...or 3. it just maybe the fan blade itself..sometimes they wear out, because they are made up of plastic...however you can easliy see that, and move it around..and make sure all the bolts are tight..

So. check the waterpump, by tring to shake the fan up and down and side to side, and see if the shaft move, then its the waterpump...the clutch really wont give you too much play, it just wont spin as fast, with the engine running, Or the blade..basically it will look like its fallen off....

Jan 19, 2010 | 1997 Jeep Cherokee

1 Answer

I have a 1995 GMC Yukon 2 dr 4x4 that is making a squealing sound that corresponds to engine RPMs. I'm thinking water pump, any thoughts? If so, what does that repair cost?


Hello,
This problem may be very easy to fix. It may be your belt on the motor, could be the alternator belt, main serpentine belt etc. Check all your belts, you should only have about an inch of play in all the belts, any more than that the belt will slip across the pulleys causing them the squeal.
If it is the water pump bearing, check and see if your fan that is mounted to the water pump is loose, or moving all over the place. You will see the pulley that the fan is mounted to moving likes its about to fall off. In that case you will need a new water pump. Hope this helps!
-Steve

Dec 06, 2009 | 1995 GMC Yukon

2 Answers

One of the bearing, ac belt passon is broken.


maybe belt too tight, get new bearing for centre of idler pully = about 14 dollars australian

Sep 30, 2009 | 2006 Toyota Land Cruiser

1 Answer

Changed fan belt on landrover discvery 300 sqeeking sound , changed bearing in tenshion arm cleaned pullies dont know were this sound is from ??


make sure its tight and make sure you replaced all the belts unless its serpentine. I would try some belt applicator aka belt spray

Sep 09, 2009 | 1997 Land Rover Discovery

1 Answer

Loud high pitched noise from belt


When you have the belt off, spin that idler pulley and see if it turns easily or makes noise. Check if the bearing feels good and smooth or if it wobbles any. While you are at it, check the fan and fan clutch to see if they turn smoothly also. There should be some resistance to the fan clutch, and make sure the fan isn't rubbing on anything.

Replacing the idler pulley is usually done as a unit since the bearing is part of the pulley.

May 07, 2009 | 1991 Ford F250

1 Answer

How to change a timing belt 92-4Runner


remove the 4 nuts in front of fan,,, pull fan off ... then fun part... gotta jar it up and down all the while pulling... shake it even!! but watch how much pressure you have or you will smash fingers on ac condensor when it does give lol then the pullies will easily pull off leaving i think 3 bolts holding the mount on.

Apr 12, 2009 | 1992 Toyota 4Runner

Not finding what you are looking for?
1993 Dodge Ram Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...