Question about 2004 Toyota Camry

2 Answers

How to I replace the oil filter on a 2009 Toyota Camry V6 engine?

I can't find the oil filter on a 2009 Toyota Camry V6 engine. Apparently they no longer us the twist on type.

Posted by on

  • 2 more comments 
  • rjklange Dec 01, 2008

    Thank you for the assistance. I picture would be great.

  • rjklange Dec 02, 2008

    Not sure how I give my e-mail address without it being posted for everyone.

  • Toyota Ed May 11, 2010

    Need your e-mail address for the picture

  • Toyota Ed May 11, 2010

    The oil filter is a "cartridge-type" filter. It is under the engine, in a cylindrical metal housing. The housing is removed, and the cartridge is then removed. Please respond if you want a picture.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 65 Answers

Under the engine in the front you will see an aluminum cover.There is a square hole that fits a 3/8 ratchet remove this first.The new filter comes with a drain adapter that snaps in the hole under the cover.This lets the oil in the housing drain.Then take a oil filter cup wrench or a big channel lock to twist of the larger portion.Then change the filter and o-ring and reinstall.Make sure the o-ring on the square drive cover is there also

Posted on Nov 30, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 92 Answers

In a new car they are usualy on the top in a black cylinder with a twist off top then they pull right out.

Posted on Dec 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the pressure switch located on a 1995 V6 Toyota Camry


You would probably mean the oil pressure (or 'sender') unit. On the 1MZ alloy block V6 it is located on the front of the engine under the timing belt cover at about the level of the oil filter, below the alternator mounting. See here p140 (you don't need to do the large amount of disassembly shown in the diagram).

http://www.turboninjas.com/camry/eg2.pdf

On the older 3VZ iron block engine it is on the outside of the block right next to the oil filter, near where the dipstick tube goes down.
.

Jan 10, 2016 | 1995 Toyota Camry

3 Answers

1994 toyota camry four door code 52 knock sensor location


Which is be hide the engine, on the top of the oil filter.

Dec 05, 2014 | 1994 Toyota Camry

1 Answer

1997 camry ce 1mz v6


Almost certainly it is coming from the rear bank cam cover gasket, for which leak the Camry V6 is notorious. Other common places are the distributor shaft o-ring seal, the crankshaft nose seal (replaceable), and the oil filter adapter bracket (if fitted)

If you get the cam cover gaskets done, specify Toyota parts, as the aftermarket parts don't last, they harden quickly.

Nov 07, 2013 | 1997 Toyota Camry

1 Answer

Oil leak by the oil filter 94CAMRY


It is a V6? If so this is one of the very common oil leaks on Camry engines of that model, the others being the distributor shaft o-ring seal and on a V6, the rear bank cam cover gasket.

The oil filter spins onto an adapter which itself is bolted to the block. In time the o-ring seal to the block goes hard and leaks. It can be easily replaced.

http://img.photobucket.com/albums/v492/xtremeskier97/Camry/OilFilterAdapter.jpg


http://i.ebayimg.com/t/93-92-96-Camry-117-OEM-Oil-Filter-Adapter-/23/!B+d1ZUQ!2k~$(KGrHqZ,!k0Ey+jCzKnQBM+tqRhQfQ~~_35.JPG

Apr 02, 2013 | 1995 Toyota Camry

2 Answers

1992 Toyota Camry V6 how many litres oil


Can't give you an exact number but I can tell you how to find out. I will asume that you are changing you oil and filter? After putting the oil plug and filter on put three quarts of oil in and start engine; after oil light goes off, turn engine off and let set for about 5 minutes, then check oil; if it is not on the low mark of dip stick add another quart, start engine, stop engine, let set for a couple of minutes and check again. By now you should either be at or above the low line and just add enough oil to top it off at the full line. I would guess that about 4 1/2 to 5 quarts is what you will need. Hope this helps,
P. Ford

Jan 10, 2013 | 1992 Toyota Camry V6

1 Answer

Where is the oil filter located on 2010 camy?


The oil filters on the 2010 Camry product are no longher 'spin-on' filters. The new style of filter being used are the 'cartridge' type. The filter is in an aluminum cylinder, under the engine. Toyota recommends the use of a special tool to remove the cartridge cylinder. Also note that you need to use the exact oil specified for your car. If you do not, your variable valve timing will not work properly, and you check engine light will come on. If the car specifies to use full-synthetic, you should not use anything else.

Nov 21, 2009 | 2009 Toyota Camry

1 Answer

Where is the oil filter located on my 2010 V6 Camry


Not to be mean... But if you can't locate the oil filter cartrige housing, which is located beside the engine, toward the top side of the engine bay, with the round cap that has a oil can stamped on it... Maybe you should have a certified Toyota mechanic service your car. Not all cars have a visible "Spin on" traditional oil filter. Newer Toyotas (and many other new cars) have oil filtering cartriges. They are in filter housings and can be accessed via a spin on cap. (this is not the oil fill cap typically found on the valve cover. Do not fill the engine oil through the oil filter housing.) Removing these can make a large mess, requires the replacement of at LEAST one critical o-ring, and should be done AFTER the oil has been drained. Good luck

Oct 10, 2009 | 2009 Toyota Camry

1 Answer

Where is the oil filter in a 2010 Toyota Camry


its a cartridge filter under the engine on the engine oil pan, it will have a 3/8'' inverted plug. just make sure you get a new one before you take out the old one there stil hard to come by.

Sep 28, 2009 | 2009 Toyota Camry

2 Answers

1997 4Runner oil quantity


For a V6 # Liter engine, you will use a galon and almost half (that is about 6 Liters of oil). I use a Toyota camry V6 3 Liter engine that shares the same engine with the Toyota 4Runner.

Rate this Fixya!

Mar 21, 2009 | 1997 Toyota 4Runner

Not finding what you are looking for?
2004 Toyota Camry Logo

1,999 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

71162 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6992 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...