Question about 2001 Hyundai XG300

1 Answer

Tail lamp replacement

How do I replace the bulb for the brake light

Posted by on

  • 3 more comments 
  • Anonymous Dec 17, 2008

    I have the same prob. Tried from the inside but there a no screws either

  • Krod1961 Jan 18, 2009

    took out the screws but not sure what housing to rotate

  • djn29insd Jan 22, 2009

    The brake light is out on my 2004 Hyundai Sante Fe. How do I know if it is a fuse or a tail lamp?

  • cilquec Apr 14, 2009

    How do I change the brake light bulb on my 2005 Hyundai Tucson.

  • Anonymous Mar 28, 2014

    tamps lamps on the trunk do not come on along with the middle tail lamp

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 651 Answers

If there aren't screws on the out side lens, open trunk to get access.

Posted on Dec 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I fix the tail light in 1999 Cadillac deville when its not the bulbs brake light and turn signal works


That is a three element lamp bulb. Brakes, turn, and tail lights are all in the same bulb. Replace the bulb and all should be OK.

May 08, 2015 | 1999 Cadillac DeVille

1 Answer

2000 Acura 3.5 RL suddenly has no tail lights or tag lights. Brake, reverse and blinker all work. Checked fuses-all appear fine. Decided to replace bulbs and noticed front right marker light out so changed...


The only thing that both the brake lights and tail lights use is a ground connection. Keep in mind the warning light on the dash may be for any exterior lamp. You may need to check the sockets and grounds on all four corners of the car.

Aug 03, 2013 | 2000 Acura 3.5RL

1 Answer

All my lamp indicator lights keep flashing. blickers work. when you step on break the break lights work. but when driving no tail lights


First replace the tail light bulbs. The tail light and brake lights are different filaments in the same bulb. it is very possible for the tail lights to go out while brake lights still work. And somtimes the tail lights can blow out together.
If you change the bulbs and still dont work then look for other problems.

May 22, 2011 | 1992 Buick Park Avenue

1 Answer

How do I change a brake light bulb in a 1999 c70 volvo?


Welcome to FixYa.com
Brake Lamp Replacement

Location of the lights

Image

The illustration shows the locations of the lights on the RH side. The LH side is the same but

mirror-reversed.

The lights have the following functions:

- 1 +1 = Parking light Fail light

- 2 = Reversing light

- 3 = Fog light LH side only (LHD cars)

- 5 = Direction indicator

- 6 = Brake light

Image

Tail light changing bulbs

Ignition off.

Open the cover in front of the tail light

Undo the wing nut and take out the lamp holder.

Change the defective bulb.

Fit in reverse order.

Check that all bulbs lamps are intact and in working order.

Image

Replacement of tail light cluster

Note! If a new tail light is to be fitted, the sleeves must be ground down 1.5 mm.

Open the cover in front of the tail light Undo the panel partly in front of the tail light Unplug the

connector for the tail light Undo the four nuts securing the tail light see illustration.

Pull the tail light straight out. Fit in reverse order

Note! check the sealing and fit on reassembly.

Check that all bulbs lamps are intact and in working order.Thank you for Using FixYa.comKind Regards, LeeYour FixYa Expert and Master Technician

Jan 27, 2011 | 1999 Volvo C70

2 Answers

Tail lights work on both sides. turn signal and


Sounds like you need to replace the drivers brake/tail light.

Dec 14, 2009 | 1998 GMC Sierra

2 Answers

2002 Toyota highlander passenger brake light not working


RE: 2002 Toyota Highlander 2.4cyl. 4X4 Base Model

I am a Certified Technician and have basic knowledge with electronics in electrical wiring. I searched the web and discovered this is a common problem.

I fixed the problem and it was a simple procedure... The problem is with the reverse light socket at the side with no brake light. This socket functions as a hub to direct current to the brake bulbs.

Remove reverse light socket and re-seat bulb. Check for loose or broken prongs. Replace if necessary.

Swap the reverse socket with the other side.

Oct 06, 2009 | 2002 Toyota Highlander

2 Answers

Computer flashes tail lamp failure and my tail lights and liciense plate light all work. what is the problem?


Hello and welcome to Fixya.com.
Check to see if you have twin tail lamp bulbs on rear i mean when i say this two tail lamp bulbs fitted to each side,check to see if one of the bulbs has blown if so replace it this will correct your computor.
Best regards.
George...

Jul 23, 2009 | 1996 Jeep Grand Cherokee

1 Answer

Hyandia Accent


not sure which top tail light you mean? do you wish to replace bulb or actual lamp on the rear screen? this is the high level brake light ! OR do you wish to replace bulb in one of the rear tail lamps offside/nearside ? which ever ? the h/level brake light bulb is accessable for bulb from the rear panel on hatch behind lamp bulb is 16 watt capless push in type

Nov 10, 2008 | 2003 Hyundai Accent

2 Answers

Brake light work fine as longs as the head lights are off. Once you turn on the head lights the brakes with the exception of the center light on top.


Check the bulb sockets, it is common on these vans that water gets into the bulb sockets and shorts out the socket. You may need to replace the sockets to get them to work again. Also check the bulbs as these are dual filament bulbs, when your lights are off and you step on the brake it lights the parking lamp filament. However as the lights are on the brake lights may seem to not work as the parking lamps are already on.

Aug 09, 2008 | 2001 Chevrolet Express

Not finding what you are looking for?
2001 Hyundai XG300 Logo

466 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

66219 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...