Question about 1995 Chrysler LHS

1 Answer

Get ride of alarm system?

How do I get rid of the alarm system in my car? Is there a fuse I can pull or something? It's very touchy, and sometimes goes off and won't stop. PLEASE HELP.

Posted by on

  • 4 more comments 
  • laurkinch11 Dec 01, 2008

    I'm assuming it's a Factory alarm. I haven't added one, and I'm not aware of anyone else adding one.

  • Anonymous Feb 26, 2009

    My automatic door opener was working intermittently but after an issue with my alarm and opening up my car doors, I replaced the battery in the automatic door opener and now it doesn't work at all. For the past 2-3 months, if I did lock my car, I found out that I was able to open the passenger door with my key and the alarm would not go off. Tonight, for some unknown reason, the alarm went off and I can't get it to shut off or let me start the engine. How can I disarm the darn thing????????????????

  • jadekat15 Feb 26, 2009

    My automatic door opener was working intermittently but after an issue with my alarm and opening up my car doors, I replaced the battery in the automatic door opener and now it doesn't work at all. For the past 2-3 months, if I did lock my car, I found out that I was able to open the passenger door with my key and the alarm would not go off. Tonight, for some unknown reason, the alarm went off and I can't get it to shut off or let me start the engine. How can I disarm the darn thing???????????????? or fix the automatic door opener?

  • mannyc1231 Apr 27, 2009

    how do you shut off fact.alarm on 95 chrysler lhs if alarm button doesnt work?

  • yadayada
    yadayada May 11, 2010

    THERE IS NO WAY AROUND THIS ALARM UNLESS YOU NEarly re-engineer the electrical system.

  • yadayada
    yadayada May 11, 2010

    Is this a Factory alarm or one someone put on?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Do not push the lock buttom when u get out of the car if u do put the key in driver door and trun to the motor and wait for the red light to shut off

Posted on Feb 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Alarm Randomly Goes Off


Factory system or added on?

Mar 20, 2014 | 2000 GMC Jimmy

1 Answer

Door sensor alarm


Most door chimes can pull out It's right on the fuse panel on many cars

Nov 22, 2013 | 2003 Ford Windstar

1 Answer

Hi I have a 2002 Chevy s10 that is having a malfunction with electrical system and I'm not sure where to start. When car is in drive the locks... Lock. But now while in driving they often open or...


Sounds like a problem with a door sensor or the body control module. The body computer takes signals from the doors and activates the horn in the case of theft. It also powers the door locks.
You may be able to pull the fuse for the bcm but that could cause more problems when you go to start the truck.

Jul 17, 2013 | Cars & Trucks

1 Answer

My alarm on my motorcycle keeps going off?


Unfortunately, most motorcycle alarm systems are very touchy. However, some systems have a dial that you can turn to adjust sensitivity. If yours has this turn in down and see how you like it

Apr 06, 2013 | Cars & Trucks

1 Answer

How to stop a panic alarm


There are thousands of alarm types out there, the only real way to know for a specific alarm is to look into the owners manual that came with the alarm system.


MOST ALARM SYSTEMS WILL STOP THE ALARM WHEN YOU PUSH EITHER THE LOCK, OR UNLOCK BUTTON.

Some also shut off when the key is put into the ignition and turned on.

On some really secure type model alarms, you may have to find & press the reset button for 5 seconds, or press the button and insert the key. (these switches are sometimes hidden since they can override the alarm)

If it's an aftermarket alarm only type system, you can always find the main power supply to the system, or the fuse and disable it.

If it's a factory system, or one installed to immobilize the ignition/fuel system, then pulling fuses isn't an option as it will disable your ignition on the vehicle.

Most do go off in about 1 minute if left undisturbed, then rearm.

Good luck!

Mar 26, 2012 | 2003 Mazda 6

1 Answer

I have a 1996 jetta 1.8 with a factory alarm and i put in a new radio when i put battery back on after radio was installed the alarm kept on going off and i cant disarm it with remote button or when i try...


You alarm system monitor the radio. You basically disabled the vehicle when you removed the radio. You will need the original radio with the radio code and install it back. Your driver door lock is what turns it off and what turns it on. You have a 1996 Jetta find a electrical auto repair who is willing to do this (I do this all the time) Disable the alarm first get rid of the horn there is only on on the outer drivers side the alarm horn will have to be cut. From there acces the fuse box under the driver dash find the starter relay and bypass it. There your done no alarm and you can put any radio on .

Sep 20, 2011 | 1996 Volkswagen Jetta

1 Answer

How to disable alarm


Find the alarm's fuse. It may be in the fuse box, usually located below the steering wheel to the left. Many cars also have other fuse boxes (sometimes three or even more) inside the engine compartment. If it's an aftermarket alarm (installed after the car left the factory), you'll find the fuse under the hood, usually on a wire connected to the positive battery terminal.


Locate the fuse that has the alarm label. You should find a fuse diagram on the lid of the fuse box. An aftermarket alarm won't have any label. Don't worry; removing the wrong fuse won't cause any damage. If you pull out a fuse and the alarm stays on, put that fuse back in and try another.

Pull the alarm fuse with the fuse puller (sometimes found in the fuse box) or a pair of needle-nose pliers. Sometimes you can remove a fuse using your fingers.

Dec 13, 2010 | 1998 Dodge Stratus

1 Answer

How do I disconnect the alarm and central locking system on my 1991 500SL. I took out the #6 fuse inthe trunk and the power antenna will not work.


if it is a factory alarm system fitted, pulling a fuse will do nothing(the thieves would have it away in no time....)and as there are so many aftermarket alarms available any good system would not be so easy to disarm,try something else.(how do we know you are the owner.......)

Mar 19, 2010 | 1991 Mercedes-Benz Mercedes Benz 500 Class

1 Answer

Anti theft alarm goes off when no one is around mostly at night or early morning sometimes when driving door locks keep locking and unlocking and interior lights go on


You have a short in your Electrical system where the alarm connects to your power assist system or a short in your alarm. Pull the fuse for the alarm and if the problem stops it is the alarm if it continues you will need to trace the connections and make sure they are secure and protected by taping them up.

Aug 27, 2009 | 2000 Dodge Neon

Not finding what you are looking for?
1995 Chrysler LHS Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...