- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if idle sound is an issue.... then put a bigger turbo on ur engine... smaller turbo means lesser weight which means that even at idle the back pressure will spin ur turbo blades.... if ur turbo is spooning at idle.. it's a good thing most guys aim at doing that... Dont worry...Be happy
1987 non-turbo: 10 deg Before Top Dead Center (BTDC) @700 rpm 1987 Turbo: 10 deg BTDC @650 rpm.
To set the timing, you will need to connect a jumper wire between terminals E1 and TE1 on the diagnostic terminal. This diagnostic terminal is located just aft of the engine compartment fuse box. It is a black plastic box marked "diagnostic" on the cover, which flips open to reveal the terminals inside. There is a diagram on the inside of the cover which explains the terminal positions. On the Turbo model, you need to remove the forward section of the engine cover to gain access to the number one spark plug wire.
Yes. However it is a very expensive swap $5000 to $8000 to do it right. You will need the 1J or 2J engine, transmission, wiring harness, ecu, and alot of other pieces to do the swap. The engine brackets will need to be modified and you will have to upgrade your brakes. This kind of swap requires a good knowledge of the Toyota Supra and the engines. I do not recommend this swap for a beginner. A cheaper way is to take a 7M-GTE and upgrade the internals and turbo.