Pulled motor and transmission out of 1989 jeep cherokee and put into my 1988 jeep cherokee. doner jeep wouldn't start now my jeep won't start. i changed the wiring harness and checked everything with a test light and concluded that it was probably the crankshaft position sensor since my tests of the wiring system showed no power between the ignition and battery and i had changed the ignition switch and checked everything else. also i have no power coming from the ignition coil going to the distributor.
SOURCE: 96 jeep grand cherokee 4.0
change the computer .... PCM get a used one it fixed mine had same problem
SOURCE: No fire to coil from coil on 96 model Jeep Grand Cherokee.
You need to put the harmonic balance for the 96 jeep on this motor,then put the crankshaft sensor on for the 96 jeep on the vehicle,this should fix you up.The crankshaft sensor and the harmonic balance have to go together.If I can be further help,let me know.>>[email protected]
Testimonial: "Roniecon was extremely helpful trying to solve this problem, he hung in there to the very end. He spent a lot of time researching the problem. THANKS"
SOURCE: My 1996 Jeep Grand Cherokee cuts off while driving
try the map sensor it controls the air flow thru the engine.
332 views
Usually answered in minutes!
×