Question about 2000 GMC Jimmy

1 Answer

2000 gmc jimmy stuck in 4lo

Truck is stuck in 4lo and wont disengage tried unhooking battery and tried backing up still nothing is working help me please

Posted by on

  • Anonymous Dec 05, 2008

    i had this problem before, and i think i pushed the auto 4 wheel dr. button, and 2 high at the same time. when they flash, push 2 high. you can read the manual to see how to put your transfercase in nutril, and then push 2 hi

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 124 Answers

If you do not have auto 4x4 try resetting the 4x4 computer by pulling the courtesy lamp and the ATC fuse for 1 minute. then reinstall fuses then cycle key on and off 5 times. please rate this answer.

Posted on Dec 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

4x4 wont work


Sorry would need a play and a drive so ask a local mechanic to have a look for you ,could be simple or a complicated thing like a drive shaft broke

Feb 17, 2014 | 2000 GMC Jimmy

2 Answers

My 2005 Yukon will not switch out of 4wd low.


I'm assuming you have operated your 4WD before, and you know the tranny has to be shifted into neutral to engage and disengage 4LO (I'd try that first). Other than that they are bad for the 4wd Switches failing, (but usually one or more lights are flashing) and if its locked in 4LO you probably have a TCCM (Transfer case control module) problem. For the record there is no need to ever use 4LO, unless you are extremely stuck in the bush somewhere, there is no advantage on the street.

Feb 23, 2011 | 2005 GMC Yukon

1 Answer

The front wheels on my 2000 gmc jimmy will not lock in 4hi or 4lo


In addition to transfer case engagement via an actuator on the "T" case there is a front axle actuator. On my Blazer which I'd bet is very similar.. There was a vacuum diaphragm under the battery which operated a cable to "lock in" front axle. make sure you have vacuum supply when asking for 4 wheel operation and make sure cable is not seized. If this checks out o.k. back to transfer case. your question asked about front wheels locking so I assumed your "T"case was working

Feb 19, 2010 | 2000 GMC Jimmy

3 Answers

4WD LO will not disengage what can cause this.


@ 2000 gmc: Exactly right.

asker: Also, it helps if you're rolling at about 2 mph with the steering wheels straight.
You cannot shift into 4LO with the wheels turned or when in a drive
gear. Also, it may be that you need the electric shift unit serviced.
It is not recommended to drive on dry pavement while in 4LO.

Jan 07, 2010 | 1997 Chevrolet Tahoe

1 Answer

Why does my 2000 jimmy keeping trying to go in to 4lo


i had the same thing happen to me i put a new 4by4 switch and it fixed the problem

Oct 27, 2009 | 2000 GMC Jimmy

1 Answer

My truck is stuck in 4LO and the button in the truck dont work.


If its a push button 4x4 take it to the shop its a VERY COMMON Problem dealing with the electric.Once you pay the $400 to get it fixed get rid of the truck and settle for a Jimmy/Blazer/Bravada with a floor shift 4x4..GM had problems with the push button 4x4.DONT DRIVE YOUR TRUCK IN THE MEANTIME.YOU WILL BLOW YOUR TRANSFER CASE RIGHT OUT OF IT!

May 20, 2009 | 1998 GMC Jimmy

1 Answer

2000 gmc jimmy stuck in 4 lo


i found the problem it was the acuator on the side of transfer case so i took it off and manualy put it in 2 wheel drive now all i have to do is get under there and turn it with a tire iron thanks but got it under control......

Nov 30, 2008 | 2000 GMC Jimmy

1 Answer

2000 gmc 4 wheel drive


Look in your fuse box for the bcm fuse (body control module) and remove the fuse atleast for a mint and then start the vehicle, put it in neutral and disengage the 4L and you are done once it is disengaged turn the vehicle off and re-insta the fuse yo pulled out and you should have no problem.

Nov 30, 2008 | 2000 GMC Jimmy

Not finding what you are looking for?
2000 GMC Jimmy Logo

Related Topics:

475 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...