Question about 2000 GMC Jimmy

1 Answer

2000 gmc jimmy stuck in 4 lo

Truck stuck in 4 lo. wont disengage. have removed battery and left sit. still wont work. have drifted backwards 20 feet and it still wont disengage. servo box behind passenger side kick panel just clicks and nothing happens. please help

Posted by on

  • good wrench May 11, 2010

    did you try putting the trans in neutral while rolling

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

I found the problem it was the acuator on the side of transfer case so i took it off and manualy put it in 2 wheel drive now all i have to do is get under there and turn it with a tire iron thanks but got it under control......

Posted on Dec 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

96 jimmy, will not engage front axle in hi or lo, it will shift in and out of lo range


go simple steps fist make sure the fuses and relay r good should be a relay that for somthing else that is the same swap them be for buy one ten insure have power coming out the switch also have ingage and disengage it and listen by the tranfercase insure that it is ingaging you should here it

Nov 22, 2012 | 1996 GMC Jimmy

1 Answer

Stuck in 4wd


put it in reverse and drive backward for 20 feet.

Dec 28, 2010 | 2000 GMC Jimmy

1 Answer

My truck is stuck in 4LO and the button in the truck dont work.


If its a push button 4x4 take it to the shop its a VERY COMMON Problem dealing with the electric.Once you pay the $400 to get it fixed get rid of the truck and settle for a Jimmy/Blazer/Bravada with a floor shift 4x4..GM had problems with the push button 4x4.DONT DRIVE YOUR TRUCK IN THE MEANTIME.YOU WILL BLOW YOUR TRANSFER CASE RIGHT OUT OF IT!

May 20, 2009 | 1998 GMC Jimmy

1 Answer

2000 gmc jimmy wont go in reverse


Do all the forward gears work or does it rev high in 1st and skip 2nd and shift right to 3rd?

May 04, 2009 | 2000 GMC Jimmy

1 Answer

Won't shift into 4 wheel drive mode at all / 2000 GMC Jimmy SLT


I have had the same problem with my 2000 jimmy. Disconnect the battery for approx 1 minute and then reconnect, this should reset the computer. It has worked for me every time. I was told it was a glitch with GMC.

Dec 24, 2008 | 2000 GMC Jimmy

1 Answer

2000 gmc jimmy stuck in 4lo


if you do not have auto 4x4 try resetting the 4x4 computer by pulling the courtesy lamp and the ATC fuse for 1 minute. then reinstall fuses then cycle key on and off 5 times. please rate this answer.

Nov 30, 2008 | 2000 GMC Jimmy

1 Answer

2000 gmc 4 wheel drive


Look in your fuse box for the bcm fuse (body control module) and remove the fuse atleast for a mint and then start the vehicle, put it in neutral and disengage the 4L and you are done once it is disengaged turn the vehicle off and re-insta the fuse yo pulled out and you should have no problem.

Nov 30, 2008 | 2000 GMC Jimmy

1 Answer

My 2001 GMC Jimmy is stuck in 4 Lo.


i believe those are vacuum controlled on top of the transfer case is a plug with 3-4 vacuum lines going to it,you will need to take it out and see if the check ball is stuck if it is it needs to be replaced

Nov 12, 2008 | 2001 GMC Jimmy

1 Answer

1999 GMC JIMMY 4X4


2000 jeep classic 4 wheel is not disengaging and has a smell when in 4 wheel

Sep 30, 2008 | 1997 GMC Jimmy

Not finding what you are looking for?
2000 GMC Jimmy Logo

Related Topics:

573 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...