Question about 1989 Toyota Cressida

Open Question

How to remove 89 Cressida rear seat squab?

Need to remove the seat base to see whether a lost wedding ring is under it. And then reinstall it>

Posted by on

  • Toyota Ed May 11, 2010

    Look at the front side of the seat bottom. There are 2 different ways of retaining the seat bottom. One is a visible tab that is pulled towards the front seats, and then you lift the seat up, from the front edge. If there is no visible tabs, or any other devices, then there is nothing but a clamp, which is an interference fit. Start on the front of the seat bottom, one-third of the way in. Pull up on the front of the seat. It will be tight. When it pops up, repeat for the other side. Let me know if this works.


4 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 59 Answers

SOURCE: 1989 mk2 Ford Orion headrest insert removal


Posted on Feb 20, 2009

  • 163 Answers

SOURCE: I need to remove the rear seat from my 2005 Camry

just pull up it will unlock the clips are tight

Posted on Jan 14, 2010

SOURCE: My wife dropped her wedding

Use a shop vacuum

Posted on Oct 12, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is my fuel pump on 1997 Toyota Avalon

It is mounted on top of the the fuel tank. You will need to remove the rear seat squab (lower) and you will see the electrical connection and screwed down mounting of the pump

Mar 20, 2015 | 1997 Toyota Avalon

1 Answer

How do I remove the original seat covers from a PT Cruiser driver seat

get under the front seats there are 4 bolts holding the seats in the floor plus a torx bolt for the lap belt, take seats out the back seat has 2 torx bolts at the front bottom of the lower cushion remove them and pull the bottom forward the back has 2 bolts holding it remove them and lift the unit straight up, be carefull there is wires under the front seat for the seat belt warning light carefully unhook them 1 for each seat now you need hog ring plairs and a bunch of new hog rings to secure the new fabric, use side cutter plairs to remove old hog rings carefully remove the seat covers, hog rings can be got at car glass shops the pliars can be got from summit racing or a place that sells car uppolstrytake your time and you can do it!!

Oct 29, 2014 | Chrysler PT Cruiser Cars & Trucks

2 Answers

Lost expensive item behind and under front passenger seat cushion.

Take the whole seat out of the car. Take it to a shop that does car upholstery.

Nov 25, 2013 | 2004 Hyundai Santa Fe

1 Answer

Whare is the lateral sensor on a 98 clk

If I am not wrong I believe that it is somewhere under the rear seat, under the squab, Not sure ??

Aug 20, 2012 | Mercedes-Benz CLK-Class Cars & Trucks

1 Answer

Whare do i find the lateral sensor on a 98 mercedies clk

Is somewhere under the rear seat under the squab. But I am not 100% sure. ??

Aug 20, 2012 | 1999 Mercedes-Benz CLK

1 Answer

Where is 1999 mazda fuel pump located?my mazda 626 been seating for 8months and it won't start

The fuelpump is located in the fueltank and is accessible by removing the rear seat squab. Under the squab is a service panel that will have a few screws holding it down. remove the panel and instead of removing the pump try giving it a firm rap with a hammer handle or piece of solid wood taking care not to damage the wiring or fuel lines exiting the top of the pump assembly. This may be enough to get the pump to work again.



Aug 21, 2010 | 1999 Mazda 626

2 Answers

I need to remove driver side seat on 2009 Maxima my wife dropped a diamond from her ring and need to get access to get it out from under the seat

should be 4 bolts holding seat into floor pan, one under each corner of the seat. Remove bolts, unplug any power connections , seat should come right out.

Aug 01, 2010 | 2008 Nissan Maxima

1 Answer

I am trying to find out what determines whether a vw eos car is rated as a "Sport" it is difficult to ascertainas there is no mention of it in the manuals although it was sold as a sport version?

in the inside front of the service book(also on the trunk floor,under the carpet) there is a sticker which gives all the codes for the "toys" on your is in blocks of letters(in blocks of 3) and you will need a dealers factory order book to decipher them also on the top of the sticker it will say,in german,the model it is based on
otherwise you could measure from the floor to the base of the wheelarch,above the wheel to see if the suspension is lower than a standard car.
the main feature of the sport version is the front seats have stiff wings on the sides of the seat squab/backrest and wheels are different from the standard car.

Jul 31, 2010 | Volkswagen Eos Cars & Trucks

Not finding what you are looking for?

Open Questions:

See all 1989 Toyota Cressida Questions

Cars & Trucks Logo

Related Topics:

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

74192 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7194 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides