Question about 2001 Ford Crown Victoria

1 Answer

Emission testing i have a 2001 crown vic that is reading not ready for emissins i have put 800 miles plus it reads 1 is ready from 5 i have changed 2 new catalic converters four 02 censors as well another mechanic suggested it could be to flush the computer any suggestions would greatly help

Posted by on

  • trishio1119 Nov 30, 2008

    i have a crown vic that I have been driving for about three days putting 100 to 150 miles on the car for the past 3 dayson the OBD11 it reads 1 monitor out of 5 is completed i a unable to have an emission sticker untill all 5 read completed I don't know what the problem could be a mechanic friend suggested it may require the computer to be flushed any ideas would greatly appreaciated

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

OBDII.com has the required drive cycle for all vehicles necessary to allow monitors to be completed. I assume tha when you say 1 of 5 you mean only one of your monitors is complete

Posted on Nov 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 V8 4.6l. It turns over, but why won't it start?


Part 1 -How to Test the Starter Motor (Ford 4.6L, 5.4L)

troubleshootmyvehicle.com > Ford > 4.6L, 5.4L
Mar 2, 2011 - Page 1 of 3: How to test a BAD Starter (Ford 4.6L and 5.4L Pick Up and SUV). ... a BAD starter motor on your 4.6L or 5.4L V8 equipped car, pick up or SUV. ...and will turn over the engine; -OR-; The starter motor won't do a thing. ... Crown Victoria ... 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005.

Question: 1997 Crown Victoria Lx Cant Turn on and Cant ...

www.2carpros.com/.../question-1997-crown-victoria-lx-cant-turn-on-an...
May 26, 2014 - Ok so i put the keys in the car turn the key but seems to me it moves more ... 1997 Ford Crown Victoria • 4.6L V8 RWD Automatic • 99,625 miles ... Keywon't turn off accessories or turn car over and ignition cylinder turns too ...

Oct 19, 2015 | Ford Crown Victoria Cars & Trucks

1 Answer

CAR WONT GO IN READY STATUS


broken evap line/port on fuel pump. Or leaking fuel pump o-ring
check the EVAP canister it is right next to fuel filter could be pcm needs update to fix false codes. Here is a old hillbilly trick that may help put saliva on the seal of gas cap when you fill up every time that may work for you.

Mar 26, 2014 | 2002 Oldsmobile Alero

1 Answer

Battery was out of 99 ford taurus for 2 month now cant get reading from obd told to drive car 4/5 days how many mile do i need to dive car to reset obd for emission test


It has nothing to do with Miles and EVERYTHING to do with Drive Cycles.. There are certain things that must be tested. Within the first 10 miles, generally speaking you are going to complete the Drive Cycle requirements for ALL the tests except for 2-3. The EVAP/ O2 normally the last ones to get cleared.

Your Vehicle is a 1999 which means that you can pass the I/M test with 2 lights "NOT READY". The EVAP is going to take longer than a few miles, you must fill up your car with fuel above the 3/4 mark and then it has to go below I believe it is 1/2.

But if there are 2 Not Ready's... it will pass

Apr 05, 2013 | 1999 Ford Taurus

1 Answer

I have two questions 2001 ford Crown Vic LS, Codes read: (p0720 output speed sensor circuit), & (p1131 lack of heated oxygen sensor bank 1 sensor 1 switch indicates lean)........Keep in mined that I...


The PCM is programed for the LS engine parameters and now that you have changed engines the signal from the new engine are out of parameters> Either see if you can get the PCM reprogrammed at a dealership or purchase a new PCM and program the chip with the police engine interceptor to the vehicle> you may also return to the place where you got the engine and purchase the PCM for the police vehicle.

Mar 22, 2012 | 2001 Ford Crown Victoria

1 Answer

I have 98 crown vic check engine light was not on in till i went to emission testing code read catylc thershold to low


you will need to take it to an exhaust shop and have the catalytic converters replaced unfortunately

Feb 20, 2010 | 1996 Ford Crown Victoria

2 Answers

On-board computer not ready for emission inspection 02 ford taurus. replaced battery 1 month ago


This is the biggest flaw in emissions testing. It takes 4 tanks of fuel and 1000 miles of wasteful driving to reset the computer on the FORD TAURUS (I've got a 2000). So much for pollution control!

Sep 14, 2009 | 2002 Ford Taurus

1 Answer

1992 crown vic with 78K miles. Started skipping


Replace you Maf sensor and have a nice day. lol does the hesitation go away when you let off the gas. does it buck hesitate and misfire under load? most common problem is the maf sesnor.
easy to change. don't buy a used part it may develop the same problem after a little while. you can try cleaning the wire inside with brake cleaner (not intake cleaner). it may or may not help.

Jun 26, 2009 | 1992 Ford Crown Victoria

1 Answer

2007 crown vic 4.6 l idles high on startup


This sounds like a normal condition.What happens is the cold start emission reduction component monitor(software program in the computer) is running.
Cold Start Emission Reduction Component Monitor
The Cold Start Emission Reduction Component Monitor was introduced for the 2006 MY on vehicles that meet the
LEV-II emission standards. The monitor works by validating the operation of the components of the system
required to achieve the cold start emission reduction strategy, namely retarded spark timing and elevated idle
airflow.
When the CSER strategy is enabled, the idle air control system will request a higher idle rpm, elevating engine
airflow. While this CSER elevated airflow is requested, the low airflow test compares the measured idle airflow from
the MAF sensor to the commanded idle airflow from the idle air control strategy.


Apr 02, 2009 | 2007 Ford Crown Victoria LX Sedan

1 Answer

I don't know how to read the mileage on my crown vic, 1989?


all numbers should be included.
The "rolling number" is tenths of a mile.
example...
123,456.7 miles.
Since it is a 94, im assuming it has 100,000 Miles PLUS.
If there are only 5 digits (plus the "rolling number" and it reads 87,654.3 check the first two digits (8+7) to lign up in a straight line.
If the 8 is higher than the 7, the car actually has 187,654.3 miles.
Thanks for using FixYa - a FixYa rating is appreciated!!

Feb 14, 2009 | 1994 Ford Crown Victoria

1 Answer

Odometer indicator not working for buick century custom 2001 about 1 week ago, in the middle of a trip, my odometer stopped reading miles. the push button where u can reset your trip miles is not counting...


OdometerGears.com has the gears for you to repair the odometer. If the odometer and the tripometer are stacked you will need and E20= 20 tooth gear and a 16 tooth medium pod. If the odometer and tripometer are split left to right you will need 2 drive and 2 worm gears. Give them a call and they will offer you a discount for the four gears. The total for two gears is $54.00 and for the four gears is $89.00 both prices include the shipping.

Oct 02, 2008 | 1994 Ford Crown Victoria

Not finding what you are looking for?
2001 Ford Crown Victoria Logo

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...