Question about 1994 Chevrolet S-10 Blazer

1 Answer

94 s10 blazer wont go out of four wheel drive

It will go from four high to four low just fine but wont go out of four wheel drive any ideas.

Posted by on

  • 1 more comment 
  • eagleboy0069 Nov 30, 2008

    mine has a cable not a solenoid and when i unplug the plug the light stays on?

  • eagleboy0069 Dec 02, 2008

    thanks for your help but i found it being the motor on the transfer case. thanks

  • Anonymous Mar 16, 2014

    wont go in four wheel drive

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 314 Answers

On the front diff you will find an electric plug. Unplug this, then remove the 2 bolts and pull out the solenoid plunger. Replace this and way ya go! Frankster016

Posted on Nov 30, 2008

  • frankster016 Dec 01, 2008

    Wow! This is an electrical cable???? Right? All of the solenoid is inside. Its about 5" long. Do check it out. Frankster016

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i put my 94 s10 blazer into for wheel drive?


There should be a button on the dash. Push either 4hi or 4 low to activate the four wheel drive.

Nov 14, 2014 | 1994 Chevrolet S-10 Blazer

1 Answer

How do I put a 94 s10 blazer into for wheel drive?


There should be a push button or knob should say 2 hi 4 hi 4 low . If there's no a knob or push button there's a shifter . I usually change into 4 wheel with the transmission in neutral or park.

Nov 14, 2014 | Cars & Trucks

1 Answer

My 93 s10 blazer 4wd it will go in high an low rang but will not lock in


On all the 90s s-10s there is a vacuum actuator under the battery tray and a vacuum switch on the transfer case itself.It is comon for the switch on the t-case to go bad and keep the front axle from engageing.If the front axle doesnt engage the truck will not have four wheel drive.let me know if this helped.

Feb 05, 2010 | 1997 Chevrolet Blazer

1 Answer

Ive got a full size blazer its a 93 and its a manuel engaded i put it in four wheel drive high or low and the front wont spin what could it be the blazer runs fine in 2 wheel hi


your transfer case could be burned out for 4 wheel and thats why your only getting the back wheels to turn. when was the last dif service done?

Jul 19, 2009 | 1999 Chevrolet Blazer

1 Answer

1993 4X4 BLASER 4WHEEL DRIVE


Your blazer is equipped with a shift on the fly four wheel drive. That means that at speeds less than fifteen miles per hour you can shift into or out of four wheel drive by simply pushing the four wheel high button. If you wish to shift into four wheel low. Stop, put the transmission into park or neutral, and push the four wheel low button. Same procedure for shifting back out. Never shift into or out of four wheel low while moving. And be careful in four wheel low. At full throttle your still barely moving, you don't want to blow your engine up!

Dec 31, 2008 | 1994 Chevrolet S-10 Blazer

1 Answer

94 s10 blazer wont go out of four wheel drive


The electric shift solennoid on the transfer case is probably bad,common problem with these.

Dec 25, 2008 | 1999 Chevrolet Blazer

1 Answer

1994 chevy s10 blazer 4x4 push button type


small sylinoid on the top of the transfer case needs replaced. easy to do. it has three vacumelines going to it just trun out and replace like a bolt.

Dec 10, 2008 | 1994 Chevrolet S-10 Blazer

Not finding what you are looking for?
1994 Chevrolet S-10 Blazer Logo

286 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...