Question about 2006 Ford Taurus

2 Answers

I have a 2006 ford tuarus,

The heater setting on works on a high setting, do i need to replace the blower motor

Posted by on

  • Anonymous Feb 04, 2009

    I have the same problem with my 2005, where is the blower motor located. Do i have to remove the dash board??

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 57 Answers

Follow the wires from the fan switch down to the heator box you will see whear the plug in to the side remove the plug then two small screws and lift out the resistor that sounds like your proublem

Posted on Feb 23, 2013

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 34 Answers

You need to replace the blower motor resistor, the reason it only works on high is that position bypasses the resistor, it is located near the blower motor

Posted on Dec 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Location of the resister for the heater fan 350 ford 2006


Its under dash panel.

HEATER BLOWER MOTOR


Its faulty blower motor resistor. The low and medium speed on blower motor is controlled by resistor and its actual speed is high. So because resistor is not working, blower motors actual speed which is high is working.


It can be faulty blower motor or faulty blower motor resistor. Get the blower motor inspected. If it's faulty it has to be replaced.


=======

For blower motor testing and replacing, check the link below: ----

Blower motor Testing/replacing for all vehicles?

http://repairhelpcenter.blogspot.in/2012/02/blower-motor-replacing-for-all-vehicles.html

------------

These will help.

Thanks.

Nov 28, 2012 | Ford F-350 Cars & Trucks

1 Answer

2006 Ford Mustang blower fan works on high only -


Need to change the switch that works high, medium, and low. It is a separate switch mounted usually behind the glove box or somewhere under the dash. Hope this helps, Mitchell.

Aug 18, 2012 | 2006 Ford Mustang

2 Answers

Blower only working on high


It's the resistor. located next to the blower motor, under the dash, on the passenger side.. Easy to replace

Nov 19, 2010 | 2006 Ford Explorer

2 Answers

Ford fusion 2007, blown blower fuse, replaced fuse, works at highest speed only (highest of 4) the other three setings don't work.


hte blower resistor is shot, near the blower motor, have the blower motor checked my guess is that it requiring too much power to run, hence the blown fuse

May 06, 2010 | 2006 Ford Fusion

2 Answers

The fan for the heater/AC only works on the highest setting (4). Could this be a fuse?


no the blower switch on the dash board is at fault the high blower speed works off the relay only which is ok

Feb 20, 2010 | 2006 Jeep Liberty

1 Answer

Heater fan only works on fastest speed


Your blower motor resistor has gone bad, it should be located next to your blower motor in the car, held in place with a couple of screws, remove it and replace it. The resistor is responsible for making the blower motor run at slower speeds than high or (4). Let me know if this helps.

Jun 16, 2009 | 2000 Ford Focus

1 Answer

Blower fan runs high only on 2006 Ford Explorer


if you have manual control climate control then the system has a blower motor resistor . if you have automatic climate control then the system has a blower motor speed control. in eather case the part is under the dash in the heater box. depending on the system you have, buy the part and then look under the dash for like part, you will half to remove the under dash panels to be able to see. the part will be on the heater box somewhare.

Jan 21, 2009 | 2006 Ford Explorer

1 Answer

Heater only works on high setting


I'm assuming you mean the fan(blower) only works on high? If this is the case you have a bad blower motor resistor. It's easy to change. It'll be on the lower right of the blower box. Kind of behind the glove box.

Jan 10, 2009 | 2006 Dodge Charger

1 Answer

Heater Blower motor


Check the plug on resistor block for corrosion. If not corroded replace the resistor block. If it is corroded replace the block and get a new plug at the same time.

Hope this helps.

Mike

Oct 30, 2008 | 2001 Ford Explorer

Not finding what you are looking for?
2006 Ford Taurus Logo

227 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...