Question about 1998 Mercedes-Benz C-Class

1 Answer

ASR LIGHT i got a BAS ASR light...what does it mean???

Posted by on

  • Anonymous Dec 09, 2008

    I have a c200 elegance auto and the bas and asr light is on i have changed the break switch problem is still there

  • Anonymous Jan 06, 2009

    ASR LIGHT is on

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try checking the plug under your passenger seat.. sometimes gets pulled out whilst moving seat.

Posted on Dec 08, 2008

5 Suggested Answers

  • 1 Answer

SOURCE: bas asr light is on

Had same problem.
At the same time the cruise control aint working either ?
My solution, (how my problem was fixed was to change the
switch behind the break pedal, ie the switch which regulates yr
rear stoplights. In my case this switch was worn out and malfunctioned.
This is a 2min job, and part aint expensive.

Posted on Feb 24, 2009

  • 23 Answers

SOURCE: What does the BAS ASR light mean in a mercedes

brake light switch ,that's the part you need to replace to fix that BAS/ASR light. It's a $20 US part, a screwdriver, and 15 minutes to fix.

Posted on Aug 09, 2009

Ray190te
  • 61 Answers

SOURCE: BAS/ASR

you will have to get the vehicle scanned for trouble codes ,it may need the sensor adaped

Posted on Jan 24, 2009

markj0711
  • 4 Answers

SOURCE: BAS/ASR warning light

You should get the code red by a dealer, if not and you have just changed the pads, then some time the code needs clearing, this merc can do for you or a good garage that has a DC. If not i may know man that can, let me know your area.

Posted on Dec 10, 2008

ilragatzzo78
  • 241 Answers

SOURCE: BAS ASR problem

ok, first you have to clear the codes.
in this type of cars you cannot clear codes with a regular obd II it has to be the factory scanner or similar. after you clear the codes drive it for a while. when light comes back on scan it again and that is going to be your true problem. if you replaced the switch but didn't clear the code the light will be still on because the computer doesn't know that you fixed the problem. so try it out and let me know if worked.

Posted on May 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to disable asr 1997 mercedes E320


you may not be avail to disable, actually let me re-frame that, when the light is on the system is disable, limp mode.
is hard to do with out a scanner, but if you have one, replace your brake switch, and reset the light. the brake switch controls the ASR/ BAS/ STABILITY CONTROL/ THE CRIUSE CONTROL. CHANGE IT WILL FIX YOUR CAR.

Apr 26, 2014 | 1995 Mercedes-Benz S-Class

2 Answers

Asr bas light on after switching brakelight switch


let dealership check it out.you have fault wheel speed sensor or you have fault in the ASR V WHICH IS THE ACCELERATION SLIP REGULATION VALVE WITH CONTROL TRACTION CONTROL.

Sep 21, 2012 | 1999 Mercedes-Benz S-Class

1 Answer

SRS - BAS/ASR & ABS lights are remaining on 1995 Mercedes C280


Well, it could mean that the emergency brake has not been fully released.The ABS system light is on if something has occurred within the ABS system. Something faulty may have happened there, get it checked out!

Aug 24, 2011 | 1995 Mercedes-Benz C-Class

1 Answer

My mersedes E 200 hes warn BAS ASR light what it means?


The steering angle sensor may need calibrating...usually after a flat battery.
Start engine turn sterring full lock to left then lock to right...light will extinguish if only a calibration issue.

Jun 10, 2011 | Mercedes-Benz E320 Cars & Trucks

1 Answer

Indicator lighting


ASR is the Anti Slip Regulaor or traction control not sure about BAS possibly Brake Assist System sounds like a brake issue or a bad sensor

Mar 29, 2010 | 1999 Mercedes-Benz SLK

1 Answer

What does the BAS ASR light mean in a mercedes 1998 E320?


brake light switch ,that's the part you need to replace to fix that BAS/ASR light. It's a $20 US part, a screwdriver, and 15 minutes to fix.

Aug 09, 2009 | 1999 Mercedes-Benz E-Class

1 Answer

I have a c180 elegance and the warning light of the bas and the asr light is on


hi you need to get the car hooked up on a scanner to pull the codes from the ecu so you can find out what as failed

cheers jay

Jun 18, 2009 | 1996 Mercedes-Benz C-Class

1 Answer

The ABS ,BAS& ASR lights keep coming up


ABS--BAS

Most likely cause is the 'stop lamp switch'
It is a electric switch located on the brake pedal inside the car, about half way up on the brake pedal.
Pretty cheap too, I think the switch is only like $25 bucks.
2 connectors on the switch and then it turns out.
hope that helps

Feb 25, 2009 | 2001 Mercedes-Benz C-Class

1 Answer

BAS ASR problem


ok, first you have to clear the codes.
in this type of cars you cannot clear codes with a regular obd II it has to be the factory scanner or similar. after you clear the codes drive it for a while. when light comes back on scan it again and that is going to be your true problem. if you replaced the switch but didn't clear the code the light will be still on because the computer doesn't know that you fixed the problem. so try it out and let me know if worked.

May 15, 2008 | 1998 Mercedes-Benz CLK

Not finding what you are looking for?
1998 Mercedes-Benz C-Class Logo

785 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

164 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...