Question about Mitsubishi Montero

1 Answer

Hi, I have a 1999 mitsubishi shogun and all my internal lights as well my clock have gone off.Also when press the remote control fob to unlock or unlock the doors, the locks rattles for about 30 seconds and stops. Can please help to diagnose what is causing it? Thanks Bart

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Bart , I about the power windows locks going berserk, i use to have that same probblem.one of the door lock mechanism is bad. you"ll have to test each one to find out which is bad by removing the conector from each and appling electricity (thats 12volts) directly to it.the bad one will do the exact thing you spoke about.

Posted on Feb 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My remotes stooped working on my 1999 Chrysler cirrus 2.5L. I disconnected the battery to do replace a CPS sensor and after I connected everything back I got a red security light on and no remotes wo


Have you tried to self program fob;switch ignition on as if starting but not starting,hold fob near to the keys and press open/close,doors should lock and unlock.If they do'nt you will need to program fob and require security code!

Jan 07, 2013 | Cars & Trucks

2 Answers

2003 Montero Sport Remote (FOB)


HI Kemp you might have too reprogram your key fob
check your owner Manuel for how to program key

Sep 09, 2012 | 2003 Mitsubishi Montero Sport

1 Answer

Replaced batery in key fob and now there is no connection between fob and security system...I can lock and unlock doors with the key and I can start car ...fob doesn't work; does not lock or unlock...


reprogram the remote transmitter. first leave driver door open all other doors closed,key removed from the ignition switch. insert key into the ignition switch,then remove it.press lock and unlock on the vechicle door lock control switch at 1 second intervals 5 times. close and repoen drivers door.press lock and unlock on the vechicle lock control switch at 1 second intervals 5 times. insert key into ignition switch. switch ignition on and off twice to program a remote transmitter code whilst erasing the original codes or three timre to check how many remote transmitters are currently registered.remove key from the ignition switch.system should now lock and unlock.twice to indicate programming mode or one to four times,slowly to indicate number of remote transmitters registered.for the solara press and hold lock and unlock remote buttons together, press lock remote button for a second period of 1 second. system should now lock and unlock vechicle.once to confirm, twice to indicate registration has failed.if required repeat button procedure to program remaining remote transmitters.note to exit programming mode close drivers door or insert ignition key.maximum of 4 remote transmitters can be programmed.if akk failed let dealership reprogram remote transmitters.

May 18, 2011 | 1999 Toyota Camry Solara

1 Answer

I bought a honda civic sport 2005 got it resprayed and i built it up and now the alarm keeps going off the key fob doesnt work etheir the battery has been flat . does any body no how to reset the fob or...


Programming
When
Remote control added or replaced. System malfunction.
How
Obtain all remote controls. A maximum of 3 remote controls can be programmed. Switch ignition ON. Repeat procedure below 3 times: Within 4 seconds: Press lock or unlock button. Within 4 seconds: Switch ignition OFF. Within 4 seconds: Switch ignition ON. Within 4 seconds: Press lock or unlock button. System should now lock or unlock vehicle. Within 4 seconds: Press lock or unlock button. Within 10 seconds: Press lock or unlock button of first remote control. System should now lock or unlock vehicle. Press lock or unlock button of second remote control. System should now lock or unlock vehicle. Press lock or unlock button of third remote control. System should now lock or unlock vehicle. Switch ignition OFF. Remove key. Check operation of all programmed remote controls.
IMMOBILIZER CAN ONLY BE SET BY DIAGNOSTIC EQUIPMENT

May 13, 2011 | 2005 Honda Civic

1 Answer

Audi a3 1999, central locking fob won't lock the doors,need to do it manually, doors won't shut properly need to bang them hard, hazard lights come on sometimes when engine switched on


hi jamie,to reset the system,unlock the door/hold key over(windows will go down),then lock/hold key over(windows will go up/sunroof will close)then press unlock button on remote for 30 secs,RESET DONE.(if this dont work renew the battery in remote/reset again).geoff.

Nov 06, 2010 | 2002 Audi A4

1 Answer

Central locking


turn key twice when opening, ie turn right. once drivers door will unlock, turn twice passengers doors will unlock, and locking is turn anti clock wise once will lock all doors, turn twice will set door dead locks.dead locks will stop openand lock internal button working and handle from opening door. the same actions can be applied to the remote one press drivers door, two press passenger doors, press and hold unlock button for 5 seconds and rear window will open.

Apr 23, 2010 | 2003 Land Rover Freelander

1 Answer

Replaced batteries in my key fob for my shogun( its the spare key witch has been idle for 2 years ) but now this needs to be reset


hi steve, well i dont know if it will work with your vehicle, but ime a bit confused as to which one you have shogun or outlander? but, either way you can try this, it might work but it might not, this seems to be a mitsi re programing thing...first , locate the data link plug ( obd plug or diagnostic plug as it is known) obtain a length of wire, as you look at the plug it will look like a pirimid with the top cut off ( sorry cant explain it any better) the TOP LEFT HAND SIDE( long bit) as you look at the plug, incert the wire in the first pin (pin 1), then connect the other end to a suitable earth on the body, with yourself inside the vehicle, shut all doors, press the hazard warning light 6 times within 10 seconds, the doors should lock then unlock, press the remote control lock or unlock (dosent matter wich) once, then press the lock or unlock button twice within 10 seconds, doors should lock then unlock, then you should have a programed key again, i hope this works for you, good luck

Feb 09, 2010 | 2003 Mitsubishi Outlander

2 Answers

Programming instructions for 2006 Mitsubishi raider remote


Note when entering program mode using that fob, all other programmed transmitters will be erased and you will have to reprogram them for your vehicle. Use the following procedure to program additional key fobs if the vehicle is not equipped with Sentry Key:

1. Enter your vehicle and close all doors.
2. Fasten yo belt to cancel any chiming that may confuse you
3. Place the key into the ignition turn to on pos. do not start
4. Press and hold the UNLOCK button on the key fob.
5. After holding the UNLOCK button for four seconds, also press the PANIC button within 6 seconds.
6 When a single chime is heard release both buttons. The chime is an indication that you have successfully entered program mode. All transmitters that are to be programmed must be done so within 60 seconds of when the chime was heard.
7. Using the fob to be programmed, press and hold both the LOCK and UNLOCK buttons, simultaneously for 2 seconds and them release.
8. Press and release the UNLOCK button a single chime will be heard,
9 Repeat steps 7 and 8 to program up to six additional transmitters.
10. Turn the ignition to the OFF position.
11. Your vehicle will remain in program mode up to 60 seconds from when the original chime was heard. After 60 Seconds, all programmed transmitters function normally.

Apr 21, 2009 | Mitsubishi Raider Cars & Trucks

3 Answers

Nissan Sylphy Intelligent-Car Remote Controller Not Working


Hi,
Some key fobs are coded and if this is so you will need to take it to your Nissan dealer with all details of the vehicle i.e. Log book/title and vin number proof of ownership. There may be a small charge for this.
Good Luck!
Press the Blue Button please when satisfied with my FREE effort, Thank You!
Paul 'W' U.K.

Feb 05, 2009 | Nissan Z Cars & Trucks

2 Answers

Programming Key Fob


I have just bought a Shogun Sport Equippe TD, I have not taken delivery yet but I do own a Carisma and the way you program that remote key is to turn on the ignition for 10 sec +'s then switch off and press the close button, this causes the door locks to respond.

Jan 02, 2009 | 2002 Mitsubishi Montero Sport

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...