Question about 2001 Dodge Intrepid

1 Answer

No heat 2001 dodge new thermstat new radiator v 8

Car use to over heat before new radiator

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Go here and read threads.. this has all the answers on it if you research it out .

Posted on Nov 30, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My heat only works when car is in park, as I drive the needle will slowly drop, and read cold, even if i drive for an hour. but if I stop and put it in park the needle will go back up, and i will have...

If you have a 3.0 motor in this, it maybe that the thermostat is either in wrong or the thermostat temperature is wrong it should be a 190 or 195 degree thermostat. The other thing it could be is that their isn't enough antifreeze in the radiator. Check the radiator when cold fill if needed also check overflow and fill it to the low line on jug. Hope this helps.Good luck and Merry Christmas everyone.

Dec 07, 2013 | 1998 Dodge Caravan

1 Answer

It overheats when the ac is on already replaced the thermstate

Have the radiator cleaned bu a radiator shop, commonly called a rod out. Or just replace it with a new one which are really cheap.

Jul 27, 2012 | 1999 Dodge Durango

1 Answer

I have a 1999 neon dodge and cannot get the heater to heat i have put new thermstat and bleed the raditor what next?

Have you checked to see if the heater core needs to be replaced. That could be your problem. The core is usually on the drivers side on the under the dash. Try this. I hope it works. Good luck.

Sep 19, 2010 | 1999 Dodge Neon

1 Answer

Thermostat housing leaksput sealer new thermstat main housing lea

Simple fix..... Just need to replace the gasket. Go to your local auto parts store and get a new gasket for your year, make, and model of car. Should only be $5 -$8 for the gasket. Take the housing apart, 4 -1/4" bolts, I believe, take them all the way out. Take the housing off, but be careful not to lose the thermostat, as it just sits in there loosely. (You will also lose some fluid from the radiator, so you may want to place a catch-pan underneath the car where the antifreeze will spill). Next, you will have to scrape the old gasket off both sides of the flange using an old putty knife, razor-blade scraper, or even sandpaper. Then just fit the new gasket in so that the bolt holes line up, and bolt the flange back in place. Don't over-tighten the bolts due to they are under quite a bit of heat and pressure and you don't want them to rupture. Good luck.

Jul 19, 2010 | 2001 Ford Focus

1 Answer

I have a 1995 Grand Cherokee out a new thermstat

If the engine is getting hot enough it sounds like the flow through the heater core is restricted. When it is hot turn the heater on and feel the radiator hoses. One should be real hot and the other a little cooler, not much. Try taking the heater hoses off and run water from a garden hose through them. Run both directions and maybe it will break something loose. You won't lose much antifreeze by unhooking the heater hoses.

Jan 05, 2010 | 1995 Jeep Grand Cherokee

2 Answers


Likely culprit could be a clogged radiator, as you did not indicate you changed along with the other items.

Oct 27, 2009 | 1998 Dodge Ram 1500 4WD

1 Answer

Changing the thermstat ,and were is it at

its on top of engine, follow top radiator hose from radiator to the engine were it clamp to the housing on engine thats were t-stant is, remove hose make sure car is cold,then remove the 2 or 3 bolts off that housing and pull off. you will see thermostant (t-stat) remove and install new one thesame way. hope this helps.

Oct 23, 2009 | 2006 Dodge Durango

1 Answer

No heat in car

the thermostat is located in the water neck housing (thermostat housing) located at the end of the top radiator hose at the engine, follow the top radiator hose toward the engine

Apr 03, 2009 | 1997 Lincoln Town Car

Not finding what you are looking for?
2001 Dodge Intrepid Logo

Related Topics:

280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides