Question about 1997 Jeep Tj
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1996 jeep cherokee sport.
If it's a lighted switch, you should have 3 terminal connections on it. One for the "ignition on" wire (from your fuse box). One going to the fog lights to turn them on when you flip the switch and one ground for the switch light to work. If your switch doesn't light, you should only have 2 terminal connections (no ground).
Find an "ignition on" plug on your fuse panel. It is only hot when you turn your ignition to the on position (not crank position). With your keys out, it should not have any power to it. Hook your "hot" wire from fuse panel to switch, take your keys out of the ignition first to be safe. Now hook the other wire from the switch to the "hot" on your fog lights. You will have to find a pass through rubber grommet on your firewall to go through. Use a clothes hanger to help fish it through. Now ground your fog lights to a grounding screw somewhere in the engine bay. There should be a few you can use, possibly one of the bolts that hold the front shroud on. Make sure it's a metal surface and use sandpaper to scrape off paint to get a metal to metal contact. Cover area with petrolium jelly to ward off rust. If your switch is lighted, hook to ground wire on fuse panel. Test with ignition on. If it doesn't come on, check your grounds again.
Posted on Oct 16, 2008
SOURCE: Power Door Locks don't work
driver's door module should have a 12v battery feed..if this missing it could explain your problem..module not being powered up..look between driver's door and body..in harness,you may have broken wiring
Posted on May 17, 2009
I have a Jeep ZJ, and the installation is very easy; this is the result...
For the installation guide, you must check all the wire connections...
1. Power Dependent (work with high light)
2. Independent Power (with switch)
I'm using the second system. Or, maybe you can use the Instruction Sheet Driving Lights for Hella 500.
I hope help you with this (remember rated this help) Good luck.
Posted on Sep 15, 2009
Black horn ground
lt.blue left front turn
blue right front turn
brown hazard power
purple turn signal power
yellow left rear turn
green right rear turn
white brake light input
Black horn ground
Posted on Feb 17, 2011
Tips for a great answer:
Aug 26, 2015 | Jeep Wrangler Cars & Trucks
Sep 12, 2010 | 1997 Jeep Tj
Sep 15, 2009 | 1997 Jeep Tj
May 27, 2009 | 1997 Jeep Tj
Mar 15, 2009 | 1997 Jeep Tj
Dec 28, 2008 | 1997 Jeep Tj
Oct 12, 2008 | 1997 Jeep Tj
Sep 02, 2008 | 1997 Jeep Tj
Jul 20, 2008 | 1997 Jeep Tj
56 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: