Question about 2006 Toyota Corolla

2 Answers

Need belt schematic for 2006 toyota corolla

Need a diagram for the serpentine belt on the 2006 toyota corolla

Posted by on

  • 4 more comments 
  • Anonymous Dec 12, 2008

    do u need a special tool for the tensioner pulley

  • Anonymous Dec 29, 2008

    need a diagram for the serpentine belt

  • Anonymous Mar 16, 2014

    Need to know how to properly install the serpentine belt for a 2004 toyota salana

  • Anonymous Mar 16, 2014

    diagrams for a serpentine belt 2006 mercury milan

  • Anonymous Mar 22, 2014

    I need a diagram for replacing a serpentine belt.

  • Anonymous Mar 23, 2014

    time diagram

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 65 Answers

I can get you a diagram on monday but it goes from the alternator to the power steering pump then around the tensioner pulley then around the crank pulley then to the a/c compressor then pull on the tensioner to give you some slack and slip it on the waterpump.I hope that helps.Let me know if you still need the diagram

Posted on Nov 29, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 104 Answers

1. Verify that the noise is coming from the accessory drive belt/belt tensioner assembly.
2. Inspect the accessory drive belt and belt tensioner assembly.
If there is any roughness to either of the belt tensioner assembly bearings or any sign
of damage, scoring, or glazing on the accessory drive belt, replace BOTH the belt
tensioner assembly and the accessory drive belt.
3. Remove the drive belt.
1ZZ–FE:
A. Remove the engine under
cover RH.
B. Remove the drive belt.
a. Turn the drive belt tensioner
clockwise to relieve tension on
the belt, and then remove
the belt.
b. Carefully return the tensioner
to the unloaded position.
NOTE:
􀀀 When retracting the tensioner, turn it
clockwise SLOWLY in 3 seconds or
more. Do NOT apply force rapidly.
􀀀 After the tensioner is retracted all
the way, do NOT apply more force
than is necessary.
2ZZ–GE:
A. Remove the engine under
cover RH.
B. Remove the wire
harness protector.
a. Unfasten the 3 clips,
then remove the wire
harness protector.
b. Disconnect the pressure
sensor connector.
Repair
Procedure

Posted on Dec 15, 2008

  • bad_dog1
    bad_dog1 Dec 15, 2008

    C. Disconnect the suction hose
    sub–assembly.
    a. Remove the 2 nuts installing
    the suction hose
    sub–assembly.
    b. Disconnect the suction hose
    sub–assembly.
    D. Remove the drive belt.
    a. Turn the drive belt tensioner
    clockwise to relieve tension on
    the belt, and then remove
    the belt.
    b. Carefully return the tensioner
    to the unloaded position.
    NOTE:
    􀀀 When retracting the tensioner, turn it
    clockwise SLOWLY in 3 seconds or
    more. Do NOT apply force rapidly.
    􀀀 After the tensioner is retracted all
    the way, do NOT apply more force
    than is necessary.
    4. Remove and replace the belt
    tensioner assembly.
    1ZZ–FE:
    Install a NEW drive belt tensioner
    assembly with the bolt and nut.
    Torque:
    Bolt: 69 N􀀀m (704 kgf􀀀cm, 51 ft􀀀lbf)
    Nut: 29 N􀀀m (296 kgf􀀀cm, 21 ft􀀀lbf)
    2ZZ–GE:
    Install a NEW drive belt tensioner
    assembly with the bolt and nut.
    Torque:
    Bolt: 100 N􀀀m (1020 kgf􀀀cm, 74 ft􀀀lbf)
    Nut: 29 N􀀀m (296 kgf􀀀cm, 21 ft􀀀lbf)
    Repair
    Procedure
    (Continued)
    ACCESSORY DRIVE BELT/BELT TENSIONER ASSEMBLY NOISE – EG021-07 April 17, 2007
    Page 4 of 4
    5. Slowly move the belt tensioner at LEAST 4 times through its full stroke. (It should take
    at LEAST 3 seconds to work it through one full stroke.) This will release any air from
    the tensioner assembly and prime it for proper operation.
    6. Install a NEW drive belt.
    7. Install the engine under cover.
    1ZZ–FE:
    Install the engine under cover RH.
    2ZZ–GE:
    A. Install the suction hose sub–assembly.
    Torque: 9.8 N􀀀m (100 kgf􀀀cm, 87 in.􀀀lbf)
    B. Install the wire harness protector.
    C. Install the engine under cover RH.
    Torque: 7.0 N􀀀m (71 kgf􀀀cm, 62 in.􀀀lbf)
    8. Confirm the repair.
    Repair
    Procedure
    (Continued)

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2.7l Toyota Tacoma 2006 serpentine belt diagram


you can get a free diagram printed out at most any auto parts store.

Oct 09, 2010 | Toyota Tacoma Cars & Trucks

1 Answer

Need a serpentine belt diagram for 2004 Toyota


Sorry for the delayed response.
CLICK
on the following LINK. It has the Serpentine Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Thanks.
http://www.2carpros.com/car_repair_information/year/2004/make/toyota/model/corolla/2004_toyota_corolla_drive_belt_routing_diagram.htm

Feb 20, 2010 | 2004 Toyota Corolla

1 Answer

Replaciing serpentine belt on 2006 Toyota Corolla


You'll have to remove the engine cover under the bottom so you can position the new belt on the pulleys properly. Get a wrench or tensioner tool and turn the tensioner clockwise to relax the drive belt. Don't apply excessive force.

It's hard to draw a picture with words, but looking at the engine from the passenger side of the car, there are basically two top pulleys, two middle, and two bottom. The drive belt goes around the outside of the two top and two bottom, and on the inside of the two middle.

Oct 31, 2009 | 2006 Toyota Corolla

1 Answer

Need serpentine belt diagram fo r2001 toyota


if the pulley is smoth the belts back rides on that surface if it is ribbed or lined the inside of the belt rides on that surface , you local parts store should have a diagram or dealership .

Aug 27, 2009 | 2001 Toyota Corolla

1 Answer

Need diagram for a serpentine belt of 2006 toyota corolla 1.8 wit


Is the diagram on a sticker, on the underside of the hood?

Aug 20, 2009 | 2006 Toyota Corolla

1 Answer

2006 toyota camry serpentine belt


Hello if it came off someting is wrong!!! if it broke /snaped okay but if it fell off you might need to look into further repair!

Jul 28, 2008 | 2006 Toyota Camry

Not finding what you are looking for?
2006 Toyota Corolla Logo

6,288 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...