Question about 2001 Mercedes-Benz C-Class

1 Answer

Fuse for wipers on a mercedes c200k where are they situated

Windscreen wipers do not work and i have no diagrame for fuse box
,there is more than one fuse box ,where would i find fuse for wipers front and rear ,also what colour would they be..can you help please

many thanks GARY

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Fuse box under the bonnet its the 40amp fuse at the back about 4th from the right.

Posted on Feb 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacing fuse for windscreen wipers fuse box diagram required


The fuse must be in the main fuse box. The position and function of the fuses is normally marked on the inside of the fuse box cover and also in the owner's handbook. If you don't come right with these, work your way through the fuses looking for a blown one. To ease your search the wiper fuse it should be around 15 to 20 amps.

Mar 03, 2011 | 2007 Ford Focus (3 Door) Hatchback

1 Answer

Mercedes slk windscreen wipers not working properly


Our wiper has stopped working all fuses seem to be fine, what could it be please

Jan 31, 2011 | 2000 Mercedes-Benz SLK

1 Answer

My car is a Mercedes C200K, the windscreen wipers suddenly stopped working last week,


have you used the owners manual to try and replace the fuse for the windscreen wipers ? (manual for the instructions and location of the fuse box)

Oct 11, 2010 | Mercedes-Benz C230 Cars & Trucks

1 Answer

Searching for fuse for windscreen wiper for mercedes C180?? help!!!!


if you look in your owners manual it will show you where the fuse box is located and what easch fuse feeds

Jan 29, 2010 | 2001 Mercedes-Benz C-Class

1 Answer

How do i replace the fuse on a fiat punto windscreen wiper


look inside the car pull the fuse box cover off, it has a diagram on the embossed into the plastic there will be a picture of a windscreen wiper moving, check the line and position relative to the location on the fuse box. most times it by the drivers right leg just under the steering wheel looks like a plastic cover sometimes they have screws but this model should just pull off. check your user manual for the location of the fuse box if you have one.

Jan 13, 2010 | 2006 Fiat Strada

1 Answer

My front wipers arent working, could it just be the fuse? if so which fuse do i change as the list only has my rear wiper on it.


Fuse nr.31, F31, (25A) = Windscreen wipers
This fuse is placed on fuse box / relay plate engine bay 1, under bonnet in engine compartment area!

If the fuse F31 is OK.
You must diagnose why windscreen wipers going slow and/or stopping.
In order to find out the cause of wipers stopping you can try follows:
1. Carefully extract the wiper arms from their axles (two pieces). In some cases you need to use an extracting tool. Heed of the windscreen !!!
2. Disassemble the plastic covers from the bottom of the windscreen.
3. With the bonnet up you can start the engine, (transmission in "N" or "P" position and parking brake on). Now you must switch on the control lever of the wipers, and go to the engine compartment. If the wiper motor runs let the wiper motor running for a few minutes and switch off. Go to the step 4. If the wiper motor do not runs you must check first the electrical feeding of the motor. It is necessary to unscrew three bolts of the mechanism and disconnect the electrical coupling (difficult assurance). If the electrical feeding is OK you must replace the motor - steps 5, 6, 7. If not you must check electrical connections, the control switch of wipers and electric cables.
4. Now you must check the two bearings of wiper mechanism with your hand. In the most cases the left bearing is out of order (is very hot). This is the most encounter fault of the wipers running at Audi.
5. For have enough space to manipulation the wiper motor together with their mechanism you must extract the plastic cover of the engine computer box, and extract also the box screws. Then you can move slowly the engine computer box, just for a few milimeters.
6. You must disconnect the electrical coupling of the motor (difficult assurance), unscrew three bolts of the mechanism and extract together with the motor. You must move them slowly between windscreen and engine computer box until the wiper motor go out together with the mechanism. This is the most difficult operation!
7. Now you can repair the bearings, replace entire wiper mechanism or replace the wiper motor. It is not very simply, but it works.
Heed of the windscreen !!!
Refit all in reverse order.

Jan 13, 2010 | 2006 Audi A3

1 Answer

Windscreen wiper on Mercedes C200 not working. Replaced it 4 years ago. Slowed down in cold weather - 2; then stopped.


you should check the connection to the main board and the connections to the motor for the wipers. these sometimes become gunked up, so when you pull them apart to check them clean them with sand paper or something that can scrub them like a green scratch pad

Dec 24, 2009 | 1998 Mercedes-Benz C-Class

1 Answer

Fuses for windscreen wipers


Look under fuse box lid, there should be a diagram.

Aug 14, 2009 | 2007 BMW 750Li Sedan

Not finding what you are looking for?
2001 Mercedes-Benz C-Class Logo

519 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

164 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...