Question about 2001 Chrysler Town & Country

1 Answer

Power sliding door doesn't work!

One of the power sliding doors doesn't work. It's the one directly behind the passenger's seat. The other one works fine, as well as the rear power door lift. Any thoughts?

Posted by on

  • 5 more comments 
  • Anonymous Feb 02, 2009

    The passenger sliding door will not open or even unlock

  • manns638sout Feb 10, 2009

    sliding passenger door will not open or unlock (2001)

  • Anonymous Feb 13, 2009

    i have the same problem except the automatic trunk door wont work either, any suggestions please help

  • tennisstarr Feb 26, 2009

    the passanger side sliding door won't work, but driver side and rear doors work. the passenger side sliding door motor will run but just won't "catch" to move door. any help would be greatly appreciated.

    tennisstarr2000@yahoo.com

  • bluvan Mar 05, 2009

    Me too, it's my driver's side door and hatch that are defective on mine.  Also have an intermittently working driver's side window.  The electronics on this thing are completely possessed.

  • Anonymous Mar 10, 2009

    i have the same problem passenger side door wont slide but motor runs and lights blink i was told it was that plastic track they have it on costs 100 dollars

  • jenjay1996 Mar 12, 2009

    Mine is the passenger door as well...after spending $650 on parts (motor and wire harness) it still doesn't work, door pops but does't slide open.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Check out http://redhouseon7th.com/redhouse/howto/2001CaravanDoorRepair/index.html?page=Single&Language=0%22

Posted on Apr 06, 2009

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 26 Answers

SOURCE: Power sliding door doesn't work!

Try taking off the door, or spray some wd-40 on the rail. It sounds like its either not getting enough power or its getting caught on something.

Posted on Apr 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

94 Corvette. Windows don't roll down or up button on Side door not working either. Hatch Button works on Center Console. Are there fuses under hood causing this? The Stereo Amp behind Seat BAD, water


Are there fuses under hood causing this? Without looking at wiring diagrams to see what all is involved in the power window electrical circuit would be guessing as to what the problem is . An looking at a wiring diagram I see a circuit breaker supply's B+ voltage for the window's . Circuit breakers very rarely go bad . I would look for broken wire's inside the rubber flex boot from the body to the door. Or maybe the power window control module is bad . If you know nothing of automotive electrical systems , wiring diagram's ,an how to test with a DMM - digital multi-meter ,your best bet mite be to take it to a qualified repair shop .

Nov 22, 2017 | Seat Cars & Trucks

1 Answer

Where is the battery located in a 2011 Acadia?


The Acadia's battery is beneath the floor behind the front passenger seat.
Slide that seat all the way forward, then open the rear passenger door. If you've got a floor mat directly behind the front seats, it will have to be moved aside. There is a panel on the floor with one screw holding it closed. Remove this panel to access the battery compartment.

May 01, 2014 | 2009 GMC Acadia

1 Answer

Driver door lock doesn t work


You need to test the parts. Does the switch have continuity when actuated? If yes, check the wires for continuity. Will the actuator work when you apply power directly to it? If yes, test the wiring.

Aug 16, 2017 | Dodge Caravan Cars & Trucks

1 Answer

2008 caravan power sliding door not working


The 30A fuse J11 in the totally integrated power module (TIPM) protects the driver side power sliding door module. The 40A fuse J3 in the totally integrated power module (TIPM) protects the left rear door module. If these two fuses are good, the modules may be defective.

Sep 10, 2012 | 2008 Dodge Grand Caravan

1 Answer

2008 Buick Enclave; front passenger, no power to window and lock controls, and no power to passenger side mirror. Additionally, passenger heated seats do not operate. From driver seat control, I cannot...


Do you know anything about automotive electronic's ? Serial data Communication network ? Electronic module's inside the vehicle doors , communicate commands ! No relay ,no fuse .
If the passenger mirror is selected and a direction switch is activated, the DDM sends a serial data message to the PDS indicating that the passenger mirror was selected and the direction to be commanded. The PDS will then supply battery voltage and ground to the appropriate control circuits for the direction selected.
DDM - driver's door module

Door Lock System Components
The power door lock system consists of the following components:
• Driver door module (DDM)
• Passenger door module (PDM)
• Door lock relay--Located in the instrument panel (I/P) fuse block and controls the locking of the rear doors.
• Door unlock relay--Located in the I/P fuse block and controls the unlocking of the rear doors
• Body control module (BCM)
• IP BEC
• Reversible door lock actuators in each door

Power Window System Components
The power window system consists of the following components:
• Driver door module (DDM)
• Body control module (BCM)
• Passenger door module (PDM)
• Rear door power window switches
• Power window motors in each of the doors (circuit breaker protected)

Your best bet , take it to a qualified repair shop that has a diagnostic scanner that can pull code's an view input data form these systems . There is one circuit breaker for the window's an fuse's for the lock's . I would think a data network problem . But that would be a guess , without testing anything is possible on these .

Dec 27, 2017 | 2008 Buick Enclave

3 Answers

Power locks stop working on sliding doors


If neither the lock or unlock works, first check the power lock fuse(s). If the fuses are good, then have the relay tested. You can call your dealer to find out where these components are located on your specific vehicle.

Nov 03, 2010 | 2006 Dodge Caravan

1 Answer

The rear sliding door will not open or close electrically.


there is a motor that drives the doors just like the motors used for windows. they do go bad.you will need to inspect the motor it is located behind the wall panel behind the sliding door. you may have to remove some bolts for seat belts and there may be some screws but most of the panel is held on with snap clips. take your time and don't break them if you can. when reinstalling be sure you are lined up before forcing the panel it will just bend the clips. once in there try tapping on the motor lightly with a small hammer. then try it it may start working again. I've seen it many times. if not maybe get one from a salvage yard. saves a lot of money. good luck

May 14, 2010 | 1999 Honda Odyssey

1 Answer

1999 Pontiac Montana passenger sliding door stopped working.


Verify the wiring harness which passes under plastic step & carpet at front passenger side. This wiring harness goes from the firewall to the pillar on the right side and some have crimped connectors in them to act as junction between two or more wires (ususlly the 12volt feed), which deteriorate with time, especially with Salt & Water. Then the electric sliding door stops working and even driver the electric seat can loose power.

May 17, 2009 | 1999 Pontiac Montana

1 Answer

Power sliding door doesn't work!


Try taking off the door, or spray some wd-40 on the rail. It sounds like its either not getting enough power or its getting caught on something.

Apr 23, 2009 | 2007 Dodge Caravan SXT Minivan New Cars

2 Answers

Power door locks, electric fuel door and power


let me assume u have not checked the fuses, meaning in al places the fuses are!, try,under the hood,under the dash and behind the panel behind the rear seat in the trunk, look in your owners manual for these locations and the particular fuse u have trouble with. good luck,hope we helped!

Feb 26, 2009 | 1995 Cadillac DeVille

Not finding what you are looking for?
2001 Chrysler Town & Country Logo

1,877 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...