Question about 2002 Chrysler Sebring

1 Answer

Car turns over but no start

2002 chrysler sebring 2.7 litre engine turns over but will not fire. Engine was missing a little bit and now will turn over and not fire. Checked engine codes and got p1390 right off the bat but then I erased all codes and it never showed back up. Then p1489 and p1490 showed up and I erased those and tried to start a few more times then checked codes again and showed no codes. Need some help if someone has had same situation.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Sounds like the "CPS" camshaft position sensor.

Posted on Dec 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Runs rough when it's warm. comes and goes. has a 2.7. and then a 99 dodge carvan with a 3.3 does the same thing.


Chrysler Sebring Questions - Car running very rough ...

www.cargurus.com > Questions > Chrysler > Sebring

CarGurusMar 27, 2011 - It seems after car gets to a certain temperature it runs very rough. ... 2011 at 12:16 PM about the 1998 Chrysler Sebring 2 Dr LXi Coupe ... it.one day it washot out and it was running sluggish with rough idle.and ... I changed the altnator and battery its runs like its brand-new.now ... 2002 Chrysler Sebring LXi.

Chrysler Sebring Questions - Engine Power Loss After Car ...

www.cargurus.com > Questions > Chrysler > Sebring

CarGurusNov 3, 2011 - Engine Power Loss After Car Is Warmed Up - Major loss of power after car has ... When vehicle is cold runs ok, sometimes a little rough but not bad. Full power. Allowed vehicle to run for over 45 minutes last night at idle, died on its own, car sat approximately 20-30 minutes. ... 2002 Chrysler Sebring LX.

* Chrysler Sebring/200 Convertible Club * • View topic - Rough ...

www.sebringclub.net/board/viewtopic.php?p=69097

Dec 29, 2006 - 5 posts - ‎3 authors
However, the vehicle still suffers from rough idle under certain conditions: ... been resolved (I don't think he noticed that it happened only when warm though). .... The test will tell you its general condition without having to dig it out of the fender, ..... Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group rough ...
15 posts
May 24, 2010
Low idle rpm
15 posts
Mar 8, 2007
More results from www.sebringclub.net

Jan 01, 2016 | 2002 Chrysler Sebring

3 Answers

Will a 2004 2.7 litre motor out of a Dodge Stratus run and work in a 2002 Chrylser Sebring 2.7? both have sameengine codes


I have a 2002 Dodge Ram 1500 pickup so I have had some experiences (mostly bad) with Dodge electronic ignition systems.
I have no specific knowledge about a Sebring or Stratus but as someone who has been working on cars and trucks for the better part of 40 years I'll make a guess that the computer control module in the Sebring is different than the CCM in a Stratus that is a two year newer model. Since you are dealing with engines from 2 different year models there were likely some (maybe minor) changes to the electronic ignition system over the two years. If the wiring harness connectors for the CCM in the Sebring and Stratus are identical I would move the CCM from the Stratus into the Sebring and see if the Stratus engine will then fire. Some questions to consider:
1. Was the Stratus engine running OK before you removed it from the Dodge?
2. Are you sure all electrical connections are correct (and complete) after installing the Dodge engine in the Sebring?

Aug 14, 2014 | 2002 Chrysler Sebring

1 Answer

2002 2.7 liter chrysler has a knock in the engine. sounds like it is coming from the valves


if the car has alot of miles on it , a little bit of top engine noise is nothing to worry about. if the car does'nt have alot of miles on it or the noise is real loud then you may have a lose valve or need rocker arm ajustment.

Aug 26, 2012 | Cars & Trucks

1 Answer

I changed the timing belt on a 2002 crysler sebring coup 3.0 engine but now my car wont turn on


It is very important that the crankshaft and timing marks get correctly lined up. Did you make sure you started with the Crankshaft timing mark on TDC (Top Dead Center).

Also, these angines have crankshaft and camshaft position sensors. If you knocked one or both of them out of adjustment they will not see the engine soinning and the computer will not turn on the Spark or ignition module.

On cars that use both if the two modules dont hit precisely as calibrated, maybe being one tooth off on the belt. it will not fire.

This is a feature to protect Zero Clearance engines from damage. this is very common in the chryser 3.0 as it is actually a Mitshubishi engine.

Apr 20, 2012 | 2002 Chrysler Sebring

1 Answer

Both keys to my 2000 Chrysler Sebring jxi got burned up in a fire. I have only the metal part of the key, the door will open, the car will turn over, but the engine cuts off. How can I get my car key...


The chips that were matched to your car in the keys were destroyed in the fire. You will have to go to Chrysler with your car's vehicle ID number and get new keys with the chips in them. Unfortunately, they keys can be expensive, but there is no other way to do it. If the fire was covered by insurance, the keys should be covered, too.

Feb 22, 2011 | 2002 Chrysler Sebring

1 Answer

Engine turns over but will not fire


The old standards. CHECK FOR SPARK, FUEL, AND COMPRESSION. iF YOU HAVE ALL THREE THE ENGINE WILL RUN. Find the one that's missing and get back to me!

Dec 18, 2010 | 2004 Chrysler Sebring

1 Answer

2002 Chrysler Sebring will not start


Mine did the click, click and the timing chain had snapped. If any of you have 2.7 litre engines plan on an engine rebuild or a replacement. Look up the 2.7 engine size along with oil sludge and timing chains. Grab yourself a towel to sop up the tears. This car is 100% garbage and I'm shopping for another non Chrysler product this week.

Aug 09, 2008 | 2002 Chrysler Sebring

3 Answers

Engine knocking and oil lampe illuminated during idle


Change oil and filter. Use a synthetic blend oil, add 1/2 pint of marvel mystery oil, and drive for a short time, 30 minutes or so. If knock continues, the damage is already happened. Use only synthetic blend or synthetic oil in the 2.7 litre engine.

Jul 09, 2008 | 2002 Chrysler Sebring

Not finding what you are looking for?
2002 Chrysler Sebring Logo

Related Topics:

637 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...