Question about 1999 Jeep Grand Cherokee

1 Answer

How to replace hose coming off top of waterpump on a 1996 jeep v8

How do i replace hose coming off top of waterpump on a 1996 jeep grand cherokee v8 engine

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 651 Answers

There should be clamps on both ends of the hose. just take off the clamps and twist the hose off and replace it. make sure car is cooled down, coolant can be very hot. like most cars, it might be very hard to get at the clamps , so be patient. good luck

Posted on Nov 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the thermostat on a 1996 jeep grand cherokee limited, with a V8


At the radiator, locate the large upper hose. Follow it to the engine. Where it connects to the engine, that is the thermostat housing.

Sep 07, 2016 | 1996 Jeep Grand Cherokee

1 Answer

Radiator change 1994 cherokee


    images for Radiator change 1994 cherokee


    More images for Radiator change 1994 cherokee

    Radiator. Replacement - Jeep Cherokee Forum

    www.cherokeeforum.com > Technical Discussion > OEM Cherokee Tech
    Nov 2, 2010 - Jeep Cherokee XJ 1984 to 1996 How to Replace Radiator .... 1994 JeepCherokee 4x4 5 speed 4.0 H.O. flex headers, Flowmaster cat back, ... Changing out lower radiator hose...
    Jul 6, 2011
    Replacing Radiator
    Apr 8, 2011
    RAdiator removal question
    Feb 19, 2011
    Replacing radiator on 1996 Cherokee
    May 19, 2010
    More results from www.cherokeeforum.com

    93 jeep grand cherokee(4.0) radiator needs to be replaced ...

    www.jeepforum.com > ... > ZJ Grand Cherokee Forum

    Sep 23, 2007 - 12 posts - ‎9 authors
    Remove the top radiator bracket and the whole thing will slide out. IF you have .... What I Have: 1994 Grand Cherokee Limited 2.25" 4 Wheel ...

Jan 23, 2016 | 1994 Jeep Grand Cherokee

1 Answer

1996 jeep grand cherokee 5.2L v8 is cranking but wont start doesnt look like its getting a spark


Might be your jeep's ecu is bad. Does the check engine light come on your dash, when you turn the ignition key to on, before cranking? If not, the ecu is bad. If the check engine light does come on, it may be the crank sensor is bad on your jeep.

Feb 08, 2011 | 1996 Jeep Grand Cherokee

1 Answer

Where is thermostat located on a 2000 Jeep Grand Cherokee Limited V8 ? Thanks


Locate the top radiator hose...follow it down to the motor...the housing that the hose connects to is where the thermostat is..usually there are 2 screws to remove and then it just comes up and the thermostat is inside

Jan 07, 2011 | 2000 Jeep Grand Cherokee

1 Answer

I'm trying to locate the thermostat on my 2000 jeep grand cherokee


  1. On 2000 Jeep Grand Cherokee 4.7L V8
  2. Remove lower radiator hose clamp and lower radiator hose at thermostat housing.
  3. Remove thermostat housing mounting bolts, thermostat housing and thermostat.

2000 Jeep Grand Cherokee 4.0l v6
Note:on the In-line 6 4.0L model the thermostat housing is mounted at the top of the engine block next to the water pump.

Nov 14, 2010 | 2000 Jeep Grand Cherokee

1 Answer

Location of coolant sensor for 97 Jeep Grand Cherokee v8


in the 5.2L V8 engine the coolant sensor is located on top of the engine. Locate the coolant thick hose coming from top of the ratiator to the top of the engine. Look at the place such hose connects to the engine you wont miss the sensor it is about one inch from there.

Jun 27, 2010 | 1997 Jeep Grand Cherokee

1 Answer

I need to know the location of the Thermostat on my 1996 Jeep Grand Cherokee,


If you have a V8 the thermostat is located under the coolant inlet tube. The tube is located on top of the engine, in the front about center. The thermostat is hard to change. Locate the upper radiator hose on your radiator and follow it to the engine block it is located on the top front part of your engine and you must lean over the front and look down onto the block to see the thermostat housing.

Oct 29, 2009 | 1996 Jeep Grand Cherokee

1 Answer

1996 jeep grand cherokee limited v8


With the water pump removed, you have to heat the body of the water pump. There is a O-Ring that seizes the tube into the water pump. Sometimes you can just loosen the bolt and heat the pump with it still bolted up the engine. Use some pliers to wiggle the tube while pulling the tube. When you put it back together replace the o-ring and add some rtv sealant around the o-ring too. This helps the seizing problem. Hope this helps
James
Chrysler Tech

Nov 29, 2008 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
1999 Jeep Grand Cherokee Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...